A wavy lace scarf, knitted from yarn in a fashionable color, will add romance to your look.
This comfortable, long lace scarf is knitted from pure wool in an original pattern that allows you to create spectacular ruffles.
The scarf is knitted straight, but working with long rows requires some patience.
Knitted scarf sizes are about 185 cm long (hanging) and 10 cm wide (unfolded).
Yarn quantity: 4 skeins of 50 g each (50 g = 175 m) of pink wool.
Hook No. 4.
Sample
When working with hook No. 4, one repeat of the pattern is 5 cm, and the flounces are 10 cm wide.
TO ACHIEVE A SATISFACTORY RESULT, YOU MUST USE THE APPROPRIATE SAMPLE
Knitting a scarf:
Cast on a long chain of chain stitches (the total length of the scarf). Knit the base row with single crochets. Knit the first row of flounces with an openwork pattern, doubling the number of loops to create a wavy surface. Tie the outer edge with a picot border formed by arches of air loops. Tie the opposite edge of the scarf in the same way, working on the other edge of the base chain.
Abbreviations:
n. = loop;
pc = chain loop;
dc - double crochet;
s2n = double crochet;
sc - single crochet;
psbn - half single crochet;
rep. = repeat;
vm. = together;
track. — next(s);
2 dc in. = knit 1 sc in each of the 2 next. dc, leaving the last thread of each dc on the hook, Yarn over, pull the thread through 3 loops.
Description of crochet scarf
Dial 332 pts,
Basic row: I sc in the 2nd st from the hook, I sc in each st to the end, turn over = 331 sts.
1st row: 5 ch (= I st s2n and I ch), I s2n next. p., * I ch, I s2n in the next. p., rep. from * to the end, turn over = 331 sts and 330 arches.
2nd row: I ch, I sc in the first stitch, ch 2, skip next. arch and p. (that is, 2 p.), I sc in next. arch or p., * skip 2 p., 6 dc in next. p. or arch, skip 2 p., I sc in next. arch or p., ch 2, skip 2 p., I sc in next. p. or arch, rep. from * to the end, turn over.
3rd row: I VP, I sbn in 1st sbn, 2 VP, * I sbn in next. dc, (I ch, I dc in next dc) 5 times, I sc in next. arch of 2 ch, repeat. from * to the last 2 sc, omitting 1 sc at the end of the last repeat, ch 2, I sc in the last sc, turn over.
4th row: 3 ch (- I dc), (I dc in next dc, 2 ch) 5 times, * 2 dc in, 2 ch, (I dc in next dc, 2 ch) 4 times, repeat. from * to the last dc, knitting the first dc in the next row. dc until there are 2 loops left on the hook, I dc in the last sc, there will be 3 loops on the hook, I yo. pull the thread through 3 loops, turn over.
5th row: I ch, I sc in the 1st p., 3 sc in the 1st arch of 2 ch, * 7 ch, 3 sc in the next. arch of 2 ch, repeat, from * to the last 2 dc, I sc in the 3rd of 3 ch, do not fasten the thread, make the first row along the I hdc on the edge loops of the flounces, do not turn over.
6th row: slave. as for the 1st row, but on the other edge of the base row, turn over.
Rows 7-10: same as rows 2-5.
Knitted products have always been in demand and popular, because they are made in a single copy. Even the most experienced craftswoman is unable to exactly repeat the pattern of a hand-knitted item. With the simplest tool - knitting or crocheting - you can make elegant and unique products, for example, a warm openwork scarf.
Lace, invented by Irish craftswomen, captured the hearts of Europeans back in the 17th century. Over time, the craftsmanship became more complex, and a large number of schemes appeared. It is worth noting that many of them have survived to this day and are successfully used by modern needlewomen.
Crocheting is actually such a simple activity that even children can master it.
Clothing designers also paid attention to knitted items. Openwork items steadily appear in fashion shows from year to year.
What about yarn manufacturers? There’s so much they don’t have in their knitting arsenal! For example, a new type has come into fashion - ribbon yarn. Openwork scarves made from it look especially impressive.
Scarf in an hour
An openwork crocheted scarf with ruffles is easy and simple to make from ribbon yarn. Its main advantage is a wide range of shades, and the colors are both single-color and sectional. To work you will need:
- ribbon yarn - 1 skein;
- crochet hook No. 4.
First you need to secure and hide the edge of the tape. To do this, unwind and straighten part of the skein. Then pass the hook through the edge, grab the top of the yarn and carefully pull it through all the loops.
Now you can continue working according to the scheme:
- Knit the connecting posts. To do this, grab the connecting thread and pull it through the loop on the hook. The hook must be inserted through 1-2 loops of the upper edge, in this case the ruffles will turn out larger. The connecting columns are knitted until the scarf reaches the required length.
- To complete the second row, you need to turn the work over and hook the ribbon, pulling it through all the loops in the first row.
- The remaining rows are performed similarly.
Air loops
Let's look at crocheting another scarf. Chains are made from air loops of a size corresponding to the length of the future scarf. For a 1 meter product you will need to cast 300 air loops. The work will be done from 100% acrylic yarn in two colors using crochet size 2.5.
The knitting pattern is extremely simple, 5 double crochets and 5 chain stitches:
So, the openwork scarf is ready. For a product length of 1 meter, it is necessary to prepare 100 meters of yarn.
Scarf with ruffles
Thick yarn is ideal for knitting a spectacular openwork scarf with ruffles. You will also need straight knitting needles No. 6 and round knitting needles No. 4.
The work is carried out in several stages:
An openwork scarf with ruffles, knitted with knitting needles, is ready.
Knitted shuttlecocks
Having achieved a certain skill in making basic patterns, you can try knitting a scarf with flounces. To work on this model you will need the following materials:
- bulk yarn - 190−200 m;
- circular knitting needles - 9 mm;
- markers for loops - 72 pcs.;
- needle.
The work will progress quite quickly, since thick yarn is used. The knitting pattern is as follows:
Openwork scarves, decorated with ruffles and flounces, made by knitting or crocheting, look stylish and impressive. This is a fashion accessory suitable for the cold season. And anyone, even a beginner knitter, can do such a thing with their own hands.
Patterns for knitting a scarf
Patterns for knitting scarves with your own hands. With all the variety of ready-made knitted items on offer, there are still many fans of do-it-yourself knitting, for example. One of the simplest knitted items that even beginners can do is a scarf.
It would seem easier to buy a ready-made scarf in a store. However, you may not always be satisfied with the combination of price and quality of the finished knitted product. But you can choose good and inexpensive yarn for knitting in the store. As a result, you will have a scarf that will not roll up even after repeated washings. Moreover, it is not always possible to match a ready-made scarf to the color of your clothes. And if you know how to knit, in a few evenings you will knit yourself a scarf of your favorite color, length, width and texture.
Depending on the purpose of the scarf, you can choose a knitting pattern. Scarves are often knitted with an elastic band. This pattern allows the product to be elastic and fit well around the neck. The narrower the scarf, the easier it is to wrap it around your neck and fasten your clothes. It is faster and easier to knit a scarf on thick knitting needles (for example, knitting needles No. 5-8). On average, a regular scarf will require 200 grams of yarn (2 skeins).
Knitting a scarf with a 2x2 elastic band
A scarf knitted with a 2x2 elastic band (knit 2, purl 2) looks good. The scarf knits quickly, the fabric is more elastic.
Knitting a scarf with an elastic band 1x1
The scarf can also be knitted with a 1x1 elastic band (1 knit, 1 purl). The fabric will be denser, and knitting will take longer).
Scarf knitted with 1x1 elastic. For knitting, we used lingonberry-colored merino yarn (50% merino wool, 50% acrylic), 5mm knitting needles. There were 40 stitches cast on the knitting needles. The width of the scarf is 19 cm. Yarn consumption is about 150 g.
Thick thread scarf
A scarf also knitted with a 1×1 elastic band, but only with thick threads. For knitting, milky yarn was used (25% wool, 75% acrylic), 8mm knitting needles. There were 30 stitches cast on the knitting needles. The width of the scarf is 21 cm. Yarn consumption is about 200 g.
The beginning and end of the scarf are knitted with a 1x1 elastic band in a checkerboard pattern. That is, the first six rows are knitted in the order: 1 knit stitch, 1 purl stitch, etc. Next 6 rows: 1 purl stitch, 1 knit stitch, etc. After 6 rows we change the order again.
Knitting a scarf with braids from 1x1 elastic
Knitting a scarf with a double-sided pattern - 1x1 elastic band with braids from 1x1 elastic band
Pattern for knitting braids with a 1x1 elastic band:
Ι = knit loop;
- purl loop;
A pattern for knitting a scarf made of braids with elongated loops, alternating with 2x2 elastic. For a scarf you can cast on 45 stitches plus 2 edge stitches on 3mm needles.
This is what the pattern looks like from the other side.
Knitting pattern for a scarf
In purl rows, knit the pattern according to the pattern.
I = knit stitch
- = purl loop
/= remove the loop without knitting, thread at work (from the wrong side we transfer the removed loop to the knitting needle again, without knitting, thread before knitting)
/ = movement of 3 loops, remove two loops and leave them on the knitting needle while working, knit the elongated loop, knit the loops from the additional knitting needle
\ = movement of 3 loops, leave the elongated loop on the knitting needle before work, knit 2 knit stitches, knit the elongated knit loop from an additional knitting needle
Extended braids pattern
Rows of elongated braids for a scarf. Cast on 40 stitches plus 2 edge stitches on the knitting needles and knit according to the given pattern. From the wrong side, knit according to the pattern. The pattern on the scarf is embossed. Therefore, after finishing knitting, the scarf can be lightly steamed on the reverse side.
This is what the drawing looks like from the reverse side.
Knitting pattern for the “elongated braids” pattern
Patterns for knitting a scarf with an elastic band with removed loops
Pearl gum
The next pattern is easy to knit. It is also called pearl gum.
2nd row - remove purl loop with double crochet, 1 knit stitch, etc.
3rd row - repeat the pattern from the 1st row.
This is what the rubber band looks like from the other side.
Scarf for a girl, knitted with pearl elastic using hand knitting yarn “Baby wool” color “White Rose” (40% wool, 40% acrylic, 20% bamboo). After washing, the scarf retained its shape and size.
On one side the elastic band resembles pearls, and on the other side it resembles a patent elastic band. The scarf looks very beautiful.
Pearl gum 2
Row 1 - knit 1, purl 1, knit 1, purl 1, etc.;
2nd row - remove purl loop with double crochet, 1 knit stitch, etc.;
3rd row - knit 1, purl 1, knit 1, purl 1, etc.;
4th row - knit 1, purl 1, knit 1, purl 1, etc.;
5th row - knit 1, purl 1, knit 1, purl 1, etc.;
6th row - remove purl loop with double crochet, 1 knit stitch, etc.;
7th row - repeat from 1st row.
On the other hand, the pattern looks like a 1x1 elastic band.
English elastic band for scarf
Using the English elastic pattern, you will get a voluminous and beautiful scarf. This scarf is suitable for women, men and children. You will need more yarn using the indicated elastic band. The English gum is performed as follows:
1st row - knit 1, yarn over, slip 1 stitch, etc. ;
2nd row - remove the purl loop with a double crochet, and knit the removed loop with a double crochet, etc.;
3rd row - like 1st row;
4th row - like 2nd row;
Double or hollow elastic
Cast on an even number of stitches on the needles.
1st row - 1 edge loop (slip without knitting), 1 knit stitch, slip 1 loop, thread before work, 1 knit stitch, slip 1 loop, thread before work, etc. repeat, the last loop is knitted purlwise.
2nd row - 1 edge, 1 front, slip 1 loop, thread before work, 1 front, slip 1 loop, thread before work, etc. repeat, the last loop is knitted purlwise.
3rd row - same as 1st row
4th row - same as 2nd row
Two-color double-sided patent elastic band for scarf knitting needles
Two-color patent elastic on the front side.
Two-color patent elastic on the reverse side.
Description of knitting two-color double-sided patent pattern
Cast on an odd number of stitches. Knit the patent pattern according to the pattern, first 2 rows in a row on the front side. Then we turn the knitting over and knit 2 rows in a row from the wrong side. Then we turn the knitting over again and knit 2 rows in a row from the front side. Next, alternating in the same way two rows from the front and back sides, we repeat the patent pattern according to the diagram from the 3rd to the 6th row.
Knitting pattern for two-color double-sided patent pattern
Ι = knit loop;
⁄ = slip 1 double crochet stitch as a purl;
● = knit a loop together with a knit yarn over;
Ο = knit a double crochet stitch together purlwise;
A = green;
B = yellow
Geometric pattern for scarf
A double-sided geometric pattern of knit and purl stitches is suitable for knitting both a men's scarf and
and for women.
Double sided geometric knitting pattern
I = knit stitch
Purl loop
Knit odd and even rows in accordance with the pattern. Even rows - according to the picture.
Shadow pattern of knit and purl stitches for scarf design
To decorate the beginning and end of the scarf, you can decorate it with a shadow pattern of knit and purl stitches, and knit the scarf itself in garter stitch.
This is what the shadow pattern looks like from the other side
Knitting pattern for a shadow pattern of knit and purl stitches
I = knit stitch
- = purl loop
Knit even rows according to the pattern.
Relief pattern for a scarf on knitting needles
A simple embossed pattern for a scarf is suitable for knitting with any thread. The pattern will look especially impressive on thick, fluffy threads, and the scarf itself will be correspondingly more voluminous.
Description of knitting a relief pattern
Cast on an even number of stitches on the knitting needles plus 2 edge stitches.
1st row: edge loop (slip), knit stitches, edge loop (purl);
2nd row: edge loop (slip), purl loops, edge loop (purl);
3rd row: edge loop (slip), knit 2 loops together, edge loop (purl);
4th row: edge loop (slip), *1 knit stitch, knit 1 knit stitch from the next cross thread*, repeat from * to *, edge loop (purl).
Below is the photo of the reverse side of the relief pattern.
Knitting a scarf with a checkerboard pattern
The scarf can be knitted with a geometric and double-sided pattern such as “checkerboard”. This is an alternation of squares made from knit and purl stitches. A scarf knitted with this pattern will keep its shape well.
Description of chess knitting
1st row - 1 edge, 8 knit, 8 purl, 8 knit, 8 purl, etc. , purl the last loop;
2nd row - knit according to the pattern;
3rd, 5th, 7th rows - knit as 1st row;
4th, 6th, 8th rows - knit as 2nd row;
9th row - 1 edge, 8 purl, 8 knit, 8 purl, 8 knit, etc. , purl the last loop;
10th row - knit according to the pattern;
11th, 13th, 15th rows - knit as the 9th row;
12th, 14th, 16th rows - knit as the 10th row;
17th row - repeat from the 1st row
Knitting pattern for the checkerboard pattern
I=knit loop
Purl loop
Knit even rows according to the pattern.
Checkerboard pattern of vertical rectangles for knitting a scarf
Another variant of the previous “checkerboard” pattern. This is an alternation of rectangles.
1st row - 1 edge, 4 knit, 4 purl, 4 knit, 4 purl, etc. , purl the last loop;
2nd row - knit according to the pattern;
3rd, 5th, 7th, 9th, 11th rows - knit as 1st row;
4th, 6th, 8th, 10th, 12th rows - knit according to the pattern;
13th row - 1 edge, 4 purl, 4 knit, purl, 4 knit, etc. , purl the last loop;
14th row - knit according to the pattern;
15th, 17th, 19th, 21st, 23rd rows - knit as the 13th row;
16th, 18th, 20th, 22nd, 24th rows - according to the drawing;
25th row - repeat from the 1st row.
Knitting pattern for a checkerboard pattern with vertical rectangles
Checkerboard pattern of horizontal rectangles for knitting a scarf
Similar to the previous patterns, you can knit a scarf using this pattern, when narrow and long rectangles of 8 knit and 8 purl loops alternate.
Beautiful chess pattern of squares of different knitting
Squares of 10 loops alternate in a checkerboard pattern: a 1x1 rib pattern and a pattern of knit and purl stripes. The pattern looks good when done with light gray yarn and is suitable for knitting men's scarves.
The pattern is double-sided and on the reverse side it looks like this:
Knitting pattern for a double-sided checkerboard pattern made from squares of different knits
Legend:
Ι = front loop
- = purl loop
On the wrong side, knit the pattern according to the pattern.
Simple double-sided knit and purl stitch pattern
View of the pattern from the other side
Knitting pattern for a simple double-sided pattern
I=knit loop
Purl loop
Knit even rows according to the pattern.
Scarf pattern with elongated knit stitches
A simple scarf pattern for beginners to knit. A pattern with elongated facial loops will look especially impressive if knitted with thick and soft threads.
View of the pattern from the other side
Description of knitting pattern with elongated knit stitches
On the knitting needles, cast on a number of stitches that is a multiple of 3 plus 4 stitches.
1st row: edge, * purl 2. loops, remove 1 loop without knitting*, purl 2, edge;
2nd row: knit according to the pattern, purl the removed loops;
Pattern diagram with elongated knit stitches
I= knit stitch
Purl loop
V= the loop is removed onto the knitting needle without being knitted, the thread remains behind the work
Knit even rows according to the pattern.
Double-sided pattern with elongated loops in garter stitch for a scarf made of yarn of two colors
This is what the pattern looks like from the front side.
And this is what a two-color double-sided pattern looks like from the reverse side.
Description of knitting a two-color double-sided dense pattern for a scarf
0th row - edge, knit with knit stitches with threads of the same color, edge;
1st row - edge, remove 1 loop, thread at work, knit 3, slip 1 loop, thread at work, etc., knit 3, edge;
2nd row - edge, knit with threads of a different color - knit 1, slip 1 loop, thread before work, 3 knit loops, slip 1 loop, thread before work, 3 knit loops, slip 1 loop, thread before work, etc. . alternate, edge
3rd row - we knit with a thread of the same color as in the 2nd row, 1 edge loop, 2 knit stitches, remove the removed loop again without knitting (pull it out), thread at work, 3 knit stitches, remove the removed loop, thread behind work, etc. alternate, edging.
4th row - knit as 1st row.
5th row - edge loop, 3 knit stitches, slip 1 loop, thread at work, 3 knit loops, slip 1 loop, thread at work, etc. alternate, edge stitch.
6th row - knit as 2nd row.
7th row - knit as 3rd row.
8th and 9th rows - knit as 4th and 5th rows.
Etc., change the thread every two rows. When removing stitches, the thread should always be on the front side before working.
Knitting pattern for double-sided two-color pattern
Ι front loop
∨ — removed loop
Dense scarf pattern
A dense pattern with elongated knit stitches for knitting a winter scarf. With this pattern, the shape of the scarf is well preserved. For knitting such a dense pattern, soft, fluffy yarn is suitable.
Description of knitting a dense pattern
On the knitting needles, cast on a number of stitches that is a multiple of 4 plus 5.
1st row: edge, *3 p., 1 slipped loop*, 3 p., edge;
2nd row: knit according to the pattern, do not knit the removed loops and remove them again onto a working knitting needle;
3rd row: edge stitches, knit stitches, edge stitches;
4th row: knit according to the pattern (purl stitches);
5th row: edge, purl 1, *1 slipped loop, purl 3*, purl 1, edge;
6th row: knit according to the pattern except for the removed loops - we transfer them to a working knitting needle without knitting;
Knit the 7th-8th rows as the 3rd-4th rows;
Dense pattern scheme
Purl loop
I= knit stitch
V = remove the loop without knitting, thread at work
Knit even rows according to the pattern, remove the loops - thread before work.
Pattern with spikelets for knitting a scarf
This is what the “Spikelet” pattern looks like from the reverse side.
Description of knitting pattern “Spikelet”
1st row: edge, * purl 3, 3 loops moved to the right - first knit the third loop, going around the first two in front, then knit the first and second loop. All three loops are lowered from the left knitting needle, 3 loops are moved to the left - the first loop is removed onto an additional knitting needle and left in front before work, then the second and third loops are knitted, and after them the first loop from the additional knitting needle *, purl 3, edge;
2nd row: knit according to the pattern;
3rd row: repeat from 1st row.
Knitting pattern for the “Spikelet” pattern
I front loop
Purl loop
Knit even rows according to the pattern.
Pattern "Spikelet" in garter stitch
The pattern is made by alternating stripes of garter stitch and spikelets of 6 knit stitches.
Pattern for knitting spikelets in garter stitch
I= knit stitch
Purl loop
Knitting braids in a scarf pattern
The scarf pattern is made by alternating stripes of garter stitch and braids of 6 knit stitches.
Double-sided braid pattern for scarf
Simple reversible braided scarf pattern. To knit, cast on a number of stitches that is a multiple of four plus two edge stitches.
1st row - 1 edge, 4 knit, 4 purl, 4 knit, 4 purl, etc., 1 edge (knit purl)
2nd row - knit stitches according to the pattern;
3rd and 4th rows - repeat according to the drawing;
5th row - 1 edge loop (remove the loop without knitting), make a tourniquet - remove 2 front loops onto a pin, knit 2 front loops, knit the loops from the pin, purl 4, etc., the last loop is purl;
6th row - 1 edge loop (remove the loop), knit the loops above the purl ones, and knit plaits from the front loops (slip 2 knit stitches onto a pin, knit 2 knit stitches, knit 2 knit stitches from a pin);
We knit the 7th, 8th, 9th, 10th rows according to the pattern;
11th -12th rows - we knit plaits from facial loops;
View of the pattern on one side:
This is what the pattern looks like from the other side:
Double-sided herringbone scarf pattern
View of the double-sided pattern from the other side
Knitting pattern for the Herringbone pattern
Ι front loop
- purl loop
Knit even rows according to the pattern.
Patterns with two repositioned scarf loops
Light and beautiful patterns with displaced loops are suitable for both women's and men's scarves.
Double-sided elastic with repositioned loops 2x2
View of the elastic on the other side:
Knitting pattern for double-sided elastic with moved loops
Ι front loop
- purl loop
Double-sided elastic with repositioned 2x4 loops
View of the elastic on the other side:
Knitting pattern
Ι front loop
- purl loop
\ first knit the second loop in the back with a knit stitch, and then the first loop in front with a knit stitch
Beautiful reversible pattern with repositioned stitches
View of the pattern from the other side
Knitting pattern
Ι front loop
- purl loop
/ going around the first loop, first knit the second loop, then knit the first loop
Double Sided Pearl Scarf Pattern
A simple and easy-to-make pearl pattern (or as it is also called “rice”) for women’s and children’s scarves looks especially beautiful when knitted with bulky threads. In our case, it is multi-strand mohair. The pattern looks voluminous and distinct, and the knitted fabric is fluffy and soft to the touch.
Scheme of a pearl pattern or a "rice" pattern
Ι front loop
- purl loop
Knit even rows according to the pattern.
Openwork patterns for knitting scarves
Openwork knitting for a women's scarf
Openwork knitting pattern
I = front loop
- purl loop
Ο yarn over
⁄
Simple openwork elastic band 2x2 for a scarf
The openwork turns out beautiful, although easy to execute. At the same time, the product looks voluminous and holds its shape. Fluffy (including mohair), soft threads are well suited for knitting.
Description of knitting openwork elastic
Cast on the knitting needles with a number of loops that are a multiple of 6 plus 2 edge stitches.
1st row: 1 edge, 2 purl, 1 yarn over, 2 loops knit together with slipping - 1 loop is removed as in knitting, 1 knitting loop, and with the left knitting needle the removed loop is put on the knitted one, repeat the pattern;
2nd row: knit according to the pattern, knit yarn overs with purl loops;
3rd row: 1 edge, purl 2, knit 2 stitches together, 1 yarn over, repeat pattern until the end of the row, edge;
4th row: knit according to the pattern.
Repeat the pattern from the 1st to the 4th row.
Openwork pattern for knitting a scarf
Ι front loop
- purl loop
Ο yarn over
\ 2 loops are knitted together with removal - 1 loop is removed as in knitting, 1 knit loop, and with the left knitting needle the removed loop is put on the knitted one
⁄ Knit 2 stitches together
Openwork 3 for scarf
Easy-to-make openwork tracks alternating with tracks made from purl loops.
Description of knitting openwork for a scarf:
On the knitting needles, cast on a number of loops that are a multiple of 12 plus 2 loops (edge loops).
1st row: edge, purl 4, 1 yarn over, knit 2 loops together with slip (1 loop is removed as in knitting, 1 knit stitch, and with the left knitting needle the removed loop is put on the knitted one), knit 2 loops together, knit 1 Yarn over, repeat pattern until the end of the row;
2nd row: knit according to the pattern;
Repeat the pattern from the 1st row.
Knitting pattern for an openwork pattern with symbols:
Ι front loop
- purl loop
Ο yarn over
\ 2 loops are knitted together with removal - 1 loop is removed as in knitting, 1 knit loop, and with the left knitting needle the removed loop is put on the knitted one
⁄ Knit 2 stitches together
Openwork 4 for scarf
View of the openwork from the wrong side:
Description of knitting openwork 4
Cast on the number of stitches that are a multiple of 13 plus 2.
1st row: 1 edge, 4 purl, 1 yarn over, 2 loops knitted together with slip (1 loop is removed as in knitting, 1 knit loop, and with the left knitting needle the removed loop is put on the knitted one), knit 1, knit 2 loops knit together, 1 yarn over, repeat pattern until end of row;
2nd row: knit according to the pattern;
3rd row: edge, purl 4, knit 1, 1 yarn over, knit 3 loops together with slip (1 loop is removed as in knitting, 2 knit stitches are knitted together, and with the left knitting needle the removed loop is put on the knitted one), 1 Yarn over, knit 1, repeat pattern until end of row;
4th row: knit according to the pattern;
5th and subsequent rows: repeat from 1st to 4th row.
Openwork knitting pattern
Ι front loop
- purl loop
Ο yarn over
\ 2 loops are knitted together with removal - 1 loop is removed as in knitting, 1 knit loop, and with the left knitting needle the removed loop is put on the knitted one
Knit ⁄ 2 stitches together
∆ 3 loops are knitted together with removal - 1 loop is removed as in knitting, 2 knit loops are knitted together, and with the left knitting needle the removed loop is put on the knitted one
Openwork pattern with crossings
The number of loops for the pattern is a multiple of 4+2+2 edge loops. Start the pattern with 1 edge, repeat the repeat according to the diagram, end with loops after repeating 1 edge. Repeat 1 time from the 1st to the 6th row, then repeat from the 3rd to the 6th row.
Knitting pattern with symbols
Openwork pattern for a mohair scarf
Cast on the number of stitches on the knitting needles that are a multiple of 14 +1 +2 edge stitches. In purl rows, knit loops and yarn overs.
Mohair openwork knitting pattern
Ι = front loop;
∪ = yarn over;
∨ = knit 4 stitches together;
>= 4 stitches knit together with knit stitch.
Shawl pattern for knitting a scarf
You can do it easily and simply by knitting a scarf in garter stitch. That is, we knit all the rows on both sides with facial loops. Garter stitch looks good on soft and fluffy threads.
The photo below shows a scarf knitted in a garter pattern, alternating with rows knitted in stockinette stitch. The end of the scarf is decorated with a pattern of knit and purl loops. The pattern diagram is given above. The main fabric of the scarf is knitted by alternating patterns as follows:
42 rows - scarf pattern (even and odd rows - front loops);
2 rows - shawl pattern (odd row - knit stitches, even row - also knit stitches);
4 rows - front stitch (odd rows - front loops, even rows - according to the pattern - purl loops);
We repeat the alternation from the very beginning.
A simple pattern with alternating rows of garter stitch and 1x1 rib
A simple pattern for knitting a scarf. The pattern looks especially interesting when performed on thick fluffy and soft threads.
View of the pattern from the other side:
Description of knitting pattern
On the knitting needles, cast on the number of loops that are a multiple of 15 plus 2 (edge loops).
1st row: remove the first (edge) loop without knitting, k1, p1, k1, p1, k1, k5, k1, p1, k1, p1 ., k1, k5, and repeat the pattern (that is, we alternate 5 1x1 elastic loops and 5 garter stitch loops), purl the last (edge) loop;
2nd row: edge loop, p1, k1, p1, k1, p1, k5, p1, k1, p1, k1, p1, K5, and repeat the pattern, edge loop;
Knit the 3rd row as the 1st row;
4th row knit as 2nd row;
Scheme of a pattern of scarf rows and rows of 1x1 elastic
I= front loop;
Purl loop
Pattern with alternating rows of garter stitch and rows of knit stitches
On the other hand, the pattern looks like alternating rows of garter stitch and rows of purl stitches:
Description of knitting pattern
On the knitting needles, cast on a number of loops that are a multiple of 9 plus 2 (edge loops).
1st row: edge stitch, knit all the loops of the row, purl the last (edge) loop;
2nd row: edge loop, k3, purl 3, k3, purl 3, and repeat from the beginning, edge loop;
Knit the 3rd row as the 1st row;
4th row knit as 2nd row;
Scheme of the pattern of alternating garter stitch and knit rows
I= knit stitch
Purl loop
Crochet for beginners - video!
How to crochet a scarf with ruffles?
Hello dear visitors of my site. Crochet scarf- This is, first of all, a very comfortable and warm product. You can wear it with classic outerwear, or with any jackets, either on top of clothes, or wrap yourself under a coat or fur coat.
In accessories stores it is easy to find a suitable scarf of any color and texture. However, a knitted scarf with your own hands will always look more interesting and original. Handmade is so valuable because it allows you to add interesting touches to things that are often overlooked. Therefore, I suggest not to be afraid to experiment with yarn colors; the entire result can depend on how you combine the color scheme.
I wish everyone a pleasant knitting and good mood. See you again!
Photo clickable
0. How to knit a scarf with ruffles, sample, materials
"Yarn from Troitsk "Podmoskovnaya"", 3 mm hook, scissors
1. How to knit a scarf with ruffles, base
1st row - I make the first loop, cast on 20 chain loops, make 3 lifting loops, in the 7th loop from the hook I knit a double crochet, (2 chain loops, after 2 loops of the previous row I knit a double crochet) x repeat until the end of the row.
2nd row - unfold the work, 3 lifting loops (= 1 double crochet), (2 chain crochets, knit a double crochet into the double crochet of the previous row) x repeat until the end of the row.
Next I knit, repeating row 2 of the base until the desired length of the scarf.
2. How to knit a scarf with ruffles, 1 row
I make 1 lifting loop (= 1 single crochet), then in each arch I knit 3 single crochets. At the end of the row there is a connecting post.
3. How to knit a scarf with flounces, 2, 3 rows
2nd row - I make 3 lifting loops (= 1 double crochet), in the same loop I knit 1 double crochet, then in each loop I knit 2 double crochets. At the end of the row there is a connecting post.
3rd row - I knit similarly to the 2nd row.
4. How to knit a scarf with ruffles, row 4
I make 3 lifting loops (= 1 double crochet), in the same loop I knit 2 double crochets, then in each loop I knit 3 double crochets. At the end of the row there is a connecting post.
A scarf can be considered a truly unique accessory. It is used not only to keep warm in winter. Casually draped over the shoulders or tied in a beautiful knot, it will complement any look. An openwork crochet scarf looks beautiful, elegant and romantic. We offer several descriptions for creating a unique accessory.
History of technology
The crochet technique originated in the 17th century. Its appearance was given a great impetus by scientific progress. As soon as people learned to mechanize the processing of natural fibers, their price dropped significantly. Experienced knitters know that complex openwork crochet patterns require much more yarn than when knitting. With the advent of cheap threads, needlework began to gain momentum.
Lace, invented by the Irish, captured the hearts of Europeans. They were desirable and highly valued. For peasants, lace knitting became a craft that brought in a good income. Such orders were especially relevant during times of famine.
The skill began to become more complex, and patterns appeared. Most of them are still in use today. Crocheting is so simple that even children can learn it. The continuity of needlework has allowed it to become firmly entrenched in our hearts.
Clothing designers couldn’t ignore knitted items either. Their collections are replenished with new knitted items every season. Now, for example, the knitted snood, which is a type of scarf, is at the peak of its fame.
Scarf for the winter
Who would have thought that openwork knitting goes well with thick yarn. We suggest you knit a warm scarf that can be worn both under outerwear and outside.
The model is made of sectionally dyed cashmere yarn. For the accessory you will need about 200 grams of Casmira yarn (338 m / 100 g) and a 3.5 mm hook.
There is a very important nuance in manufacturing - the scarf is knitted horizontally. You can find the diagram and description below in the text.
First, a chain of air loops is assembled, the length of which will correspond to the length of the scarf. It is tied on one side with a pattern according to the pattern until the very end. Then the thread needs to be secured and cut. Attach the working thread in the place indicated in the diagram and continue tying the starting chain on the other side.
This model is perfect for beginner craftswomen. All that remains is to decorate the ends of the scarf with tassels and you don’t have to be afraid of cold weather.
Product per hour
What yarn manufacturers haven’t come up with for needlewomen. A combination of different fibers, bouclé, adding sparkles. But a relatively new type of yarn – tape yarn – does not go out of fashion. It is so easy to use that you can update your wardrobe with a fresh accessory in just an hour! The big advantage of this type of yarn is a wide palette of colors; you can choose either a single-color option or sectional dyeing. We invite you to make a stylish scarf for a girl. Feel free to choose rich colors, let autumn or spring be full of bright colors.
To create a scarf you will need:
- 1 skein of ribbon yarn;
- Hook No. 4.
The first step is to secure and hide the edge of the tape. Carefully unwind part of the ball and straighten it. Pass the hook through the edge as shown in the photo.
Grab the top of the ribbon and pull it through all the loops.
Further knitting should be done with connecting stitches. Grab the loop thread and pull it through the loop on the hook. To make the ruffles larger, you need to insert the hook through 1-2 loops of the upper edge of the ribbon.
Continue making stitches until you have knitted the desired length of scarf.
To complete the second row, unfold the product and hook the ribbon, passing it through the loops of the first row.
At the end of the second row you will see this ugly stripe.
Don’t worry, after you complete a few more rows, the flounces will cover it tightly.
The scarf made from ribbon yarn is ready! To complement your baby's bright look, you can create a simple ruffled skirt by carefully tying a ribbon into a simple fabric.
Solomon loops
The once popular scarf-collar, called a snood, is again at the peak of fashion. And it’s not surprising, because this accessory can be either warm and voluminous, or light and airy. We invite you to crochet a fashionable snood.
You can make it from mohair or angora, or from acrylic threads. It is better not to take yarn that is too thin and fragile, because you can easily tear it when knitting elongated loops.
The snood itself is very simple to do. The fabric increases quickly, and the yarn consumption even for a long scarf will not exceed 100 grams. To do the job, choose a hook that matches the thickness of the thread. Decide in advance on the length and width of the model.
We offer you a detailed master class on knitting fabric with Solomon loops. Knitting is done according to the pattern taken from the Osinka portal.
The knitting process can be left without comment; it is depicted in detail step by step in the photo.
