Many of the summer residents have their own gardens. Of course, in order to harvest a rich harvest, it is necessary to spray with special preparations. Otherwise, insects will destroy not only the crop, but also the fruit trees themselves (for example).
If the garden has a large area, in order to spray it all, you will have to apply muscular force quite often to pump up the necessary pressure for the sprayer. On the website of the RusBytTech online store, rusbyttech.ru, you can purchase a ready-made sprayer with an electrical component. However, if you already have a manual sprayer, you can always upgrade it yourself.
It is worth noting that all sprayers of this kind are capable of holding no more than 3 atmospheres. Otherwise, the sprayer tank will simply burst. Naturally, it will not be torn apart.
After all, there is an excess pressure relief valve. But, nevertheless, more than 3 atmospheres, in principle, pressure is not required. Therefore, an ordinary electric pump can be used to pump it.
These are often used by motorists to inflate tires. The beauty of it is that it can operate on 12 V and still produce the required pressure. This is exactly what we need.
After all, an automatic sprayer must still remain compact enough so as not to create additional inconvenience during spraying.
The point is this. Initially, a hole must be made in the body of the hand sprayer. It's best to do this somewhere on top. It won't interfere there. To hook up the pump, it is recommended to use an ordinary car “nipple”.
It can be either angular or vertical. It all depends on what you have on hand. Installing it is not difficult:
- make a hole of the required diameter;
- we install the nipple into it after lubricating it with liquid soap;
- To ensure a tight seal, it is recommended to seal the nipple with sealant.
All that remains to be done is to put the pump on the nipple using a clothespin. We are talking about a mechanism for quick fixation on the nipple. Turn on the compressor and control the pressure.
Now you just need to have time to fill the sprayer with the necessary mixture. The entire procedure of spraying the garden will be much faster and easier.
In the video, the gardener will demonstrate how he independently modified a manual sprayer using the technique described above:
When carrying out gardening work, a lot of effort goes into fighting pests that attack vegetable and berry beds, bushes, and fruit trees. The season for treating with special means begins in early spring and ends in late autumn. It's time to think about how to make a sprayer with your own hands in order to fully meet uninvited guests. It is worth considering that an assistant in the fight against insects should not become a source of additional problems. The dosage of drugs and the accuracy of spraying the liquid are important.
Types and design of different types of sprayers
High-quality treatment of plants with various means is a responsible task. It is necessary to follow a set of unwritten rules, the main one of which is do no harm. An overdose of chemicals can have harmful consequences. Spraying is carried out using special equipment. Regardless of whether you plan to purchase ready-made equipment or assemble a garden sprayer yourself, you start by choosing the optimal model.
Simple hand sprayer
The simplest hand tool
Designed for processing small areas, beds and low-growing bushes. It is distinguished by a simple design solution: a pump pump is built into the lid of the container, with the help of which air is pumped in and the required pressure is achieved. The solution is sprayed by pressing the lever. Working volume – from 0.5 to 2 l.
Care should be taken during operation to avoid contact with airborne chemical particles. The device is kept away from the face, and work is carried out wearing a medical mask and protective gloves.
Sprayer device
Operating principle of a pump sprayer
This model is convenient for processing low trees, shrubs, and vegetable gardens. It is characterized by a more advanced device than its manual counterpart. The lid performs a double function - it seals the liquid inside the container and at the same time acts as a pump. Working volume – from 3 to 12 l, pressure – 3-4 atmospheres. Equipped with a shoulder strap.
The drug is supplied through a hose, at the end of which a rod 1-3 m long is attached. The liquid is sprayed through a nozzle, which allows it to cover a larger area than when working with a manual analogue.
You have to carry the pump sprayer around the entire site
Manual backpack sprayer
The backpack garden sprayer is designed to treat large areas - up to 0.5 hectares. It has two chambers - a pumping chamber and a working chamber with a volume of 12 to 20 liters. For safety reasons, the pump is separated from the solution container. If the air chamber ruptures due to excess pressure, the liquid will not spill and will not cause harm.
A significant disadvantage is the need to constantly maintain pressure manually. At the same time, it is distinguished by fairly high productivity and expanded operational capabilities. A careful study of the design will help you decide how to make a tree sprayer with your own hands if you do not want to spend money on a production model.
A backpack manual sprayer is mainly used for work in summer cottages
Backpack battery sprayer
This type of equipment is classified as “superior comfort” models. Structurally, it is almost no different from a manual backpack sprayer, but it has an important advantage. The air is not pumped in manually, but using a battery-powered pump. The energy source is charged from a regular household network. Battery life is about 3 hours.
The market offers a wide range of models with capacities from 12 to 20 liters. You can purchase a small 5 liter sprayer. Another valuable feature is the telescopic rod, on which you can attach up to 3 nozzles.
Mandatory attribute - nipple valve for releasing pressure
Pump-type home appliances
Pumping tools do not have a working capacity and resemble compact bicycle pumps with a hose, the free end of which is lowered into a container with a solution for treating plants. This unit is convenient for processing vegetable gardens, shrubs and low trees.
The solution can be poured into a container of any size and any configuration - a bucket, canister, barrel and even a bottle. There is no need to disconnect or disassemble anything to fill the vessel. Ideal for using different solutions - there is no need to wash the dishes before filling with another composition.
Pump Sprayer
Design features of the sprayer
Each country house, homestead or small farm has its own plant processing needs. Therefore, the desire to assemble the equipment yourself or modify a factory model is quite justified.
Most often, home craftsmen are driven by the desire to improve the labor-intensive process of processing trees. The height of some fruit crops reaches 10-12 m, and the tops of walnuts are completely inaccessible.
The task is simplified by the simple design of the sprayer:
- working container made of materials insensitive to chemical compounds;
- pump, electric or gasoline pump;
- pump chamber;
- sealed lid;
- safety valve to relieve excess pressure;
- flexible hose for supplying the finished solution;
- lever or trigger for adjusting the supply of the drug;
- a rigid rod of the required length on which the nozzles are mounted.
DIY sprayer assembly diagram
How to make a garden tool from a canister
The easiest way to assemble it yourself is to make a sprayer from a canister, preferably a metal one. The container is durable, resistant to corrosion, and insensitive to chemical compounds.
The most convenient is a 10-12 liter canister, to which it is easy to attach straps and make a backpack. Any pump is suitable: a foot-operated car pump, an electric vibration pump, for example, the popular “Malysh”, which is found in many households.
A regular nipple is suitable for mounting the valve, and the components - hose, rod, nozzles - are sold at any agricultural store.
The canister is used as a container
However, there is a significant drawback. If the work is planned to be carried out over a large area, you will have to use an industrial extension cord or look for other options for connecting to the network. But on a plot of 6-8 acres, the unit is indispensable and will be a reliable assistant.
The advantages include the use of an electric pump, which significantly expands the range of applications of the sprayer. In the spring, many summer residents use a soap solution to wash tree bark. In the fall, in order to prevent diseases, they are treated with urea and other natural remedies.
The electric pump allows you to maintain a constant pressure of 2 bar, which has a positive effect on spraying efficiency. But what to do if the plot has not 6 acres, but all 60?
Milk cans with a capacity of 30 liters are often used as a tank.
How to assemble a unit for processing large areas
Household or farmsteads with a large area are treated with sprayers with a volume of 100 liters or more. A walk-behind tractor or a mini-tractor acts as a traction vehicle. An undeniable advantage of the design is the ability to connect the pump to a walk-behind tractor using a belt drive or power take-off shaft.
Video: Garden tool for spraying on a walk-behind tractor
Suitable for use when spraying:
- gardens;
- vineyards;
- fields.
Step-by-step assembly of the structure
Depending on the need, vertical or horizontal rods are used. It is also possible to regulate the pressure. For example, when raising the solution to a significant height, 2 bar may not be enough, and you will have to increase the pressure to 3-4 bar.
Before making a sprayer on a walk-behind tractor, perform the following preparatory work:
- Install the container. Not only the material of the tank is important, but also the volume. Consumption of the drug per 100 sq. m ranges from 2 to 5 liters depending on the spray intensity and the number of nozzles.
- The structure is assembled almost by analogy with a homemade backpack sprayer. Be sure to provide a valve to relieve excess pressure.
- Connect and connect the pump. When choosing equipment, check whether the model fits the walk-behind tractor.
- The rods equipped with nozzles are hung and put into operation.
An example of a homemade device mounted on a mini-tractor
Important Requirements and Assembly Videos
When spraying gardens, telescopic booms are usually used. This makes it possible to process trees of various heights and not waste time, irrigate the leaves and branches from all sides with the solution.
The length and number of nozzles on horizontal rods used when cultivating fields depends on the width of the beds, as well as the dosage of the solution for every 100 square meters. m. The optimal distance is 40-50 cm. Under pressure, the drug is sprayed evenly from all holes, and the level of irrigation of each plant will be approximately the same.
The motorized sprayer is productive and convenient, but its cost is also high
Do not confuse two different types of equipment - a motorized sprayer and a structure that is mounted on a walk-behind tractor. In the first case, we are talking about an improved autonomous professional model powered by a gasoline engine.
Otherwise, the sprayer is similar to its backpack counterparts. Its performance cannot be compared with devices designed for fields and gardens. You can clearly see the differences in the video.
Video: How to make a sprayer for a walk-behind tractor with your own hands
How to use a sprayer pump
The pump is the key and most expensive component in the sprayer system, which often hinders the desire to automate the irrigation of a garden or vegetable garden with medicinal solutions. Is it worth buying special equipment, or can you get by with improvised means?
Homemade from a tank
New life for a car battery
Car owners change the battery approximately every five years. Responsible - more often, without waiting until the density of the electrolyte drops to a critical level. But maintaining a vehicle's electrical system is one thing, and generating energy to power a low-power motor is another.
The design is simple:
- metal grips are connected to the battery;
- connect a two-core soft-braided electrical cable and a standard cigarette lighter (it is important to maintain the polarity);
- A motor is placed inside the container, which acts as a pump;
- connect to a hose and sprayer;
- start work.
This device is suitable for processing strawberries and other low-growing crops. A significant drawback is that the working area is limited by the length of the cable. The battery is charged using a standard device.
Centrifugal pump
Using a Centrifugal Pump
You can make a garden sprayer with your own hands using a conventional centrifugal pump that has served its life in a borehole or well. Additionally, you will need a pressure regulator, which can be a tee with a shut-off valve for connecting a washing machine. The part is installed on the abductor arm.
Next, assembly is carried out according to the general scheme, the solution is prepared and poured into the container. Lastly, immerse the pump and start working. The disadvantages of this option include the stationary position of the tank with liquid, which is compensated by the length of the hose.
The power of the centrifugal pump is large enough to maintain the required pressure. The design is also effective for irrigation.
Diagram of a sprayer from a “Rucheek” pump
The option of using a 12V battery pump is not excluded. The small unit has enough energy to ensure uninterrupted operation for several hours.
An undoubted advantage is the ability to connect the device to a conventional hand pump sprayer whose pump has failed. This is not just a repair, but a modernization that will significantly speed up the work.
Video: Sprayer without costs
There is nothing more enjoyable than making the world around you a better place with your own efforts. But if you can’t make a sprayer yourself, you should take a closer look at ready-made models and consult with professionals. Garden equipment specialists will suggest the optimal model suitable for use in a particular household. Your everyday life at home will become less loaded with labor-intensive work, and you will find time for new ideas and achievements.
Modern agriculture is impossible without labor mechanization. In particular, sprayers are often used to care for cultivated plants. This equipment is divided into several categories, so it can be used in any area.
For example, there are small hand-held models that are used in greenhouses. For processing medium and large areas, the sprayer functions as an attachment for a tractor or walk-behind tractor.
It is worth noting that the design of the sprayers is extremely simple, so it is not necessary to purchase factory models.
Even without the proper experience, you can make a sprayer with your own hands using suitable materials at hand. Let's look at several installation schemes.
Design Features
Before you start making a homemade sprayer, it makes sense to familiarize yourself with the basic requirements for this type of equipment.
- Any sprayer, regardless of design, must meet the following criteria: Drop size.
- The spray of chemicals should be fine to avoid burning the plants. In addition, it helps control fluid consumption. Uniformity.
- Pesticides must be applied evenly to the plants to ensure a good treatment. Distribution.
- The liquid from the sprayers should be distributed evenly, regardless of external conditions, planting frequency and row spacing. Consumption.
- The amount of fluid consumed should not depend on the concentration of the substance. The capacity of the barrel should match the length of the runs, this will ensure better performance. In addition, the equipment must be convenient to store and operate.
The main thing is that the sprayer does not damage the plants while moving. This does not apply to factory models - here every element is calculated by specialists. However, when making homemade products, this nuance is worth paying attention to.
Sprayers are classified according to liquid consumption per hectare treated. According to this criterion, equipment is divided into four groups:
- ultra-small – up to 5 l;
- small – 75-100 l;
- medium - up to 200 l;
- large - from 200 l.
The last two categories are usually installed on walk-behind tractors and tractors. Having understood the basic provisions, we will consider options for self-production. 
Method No. 1
You can assemble a sprayer from ready-made parts. Spare parts for sprayers are sold in specialized stores, so you can purchase individual parts to create your own model.
For example, make a small hand sprayer with an extended boom. With the help of such a product you can process not only bushes and beds, but also tree crowns.
As a result of such modernization, a practical and compact model can be created. However, the economic benefit disappears - you still have to buy the parts. But you can assemble the sprayer according to your individual needs. 
Method No. 2
We offer a version of a manual sprayer made from scrap materials. As a tank for liquid, you can use a tank from an old washing machine. This element is usually made of stainless steel, therefore it will be inert to pesticides and chemical fertilizers.
In addition, such tanks have sufficient capacity, so it is enough to process a medium-sized garden plot.
The tank can be installed on an old cart to make it easier to move the structure around the site. The tank is attached to the trolley frame using threaded connections. To supply fluid under pressure, you will need an oil pump from a passenger car.
The pump will be powered by a small electric motor, which is more economical than diesel and gasoline counterparts. The drive is provided by a belt drive; for this purpose, the motor shaft is equipped with a small pulley, and the pump shaft is equipped with a large one.
The pump is installed inside the tank, the motor outside. We attach a copper tube to the pump, which we connect to the sprayer hose. The engine can be powered by a battery or an electric cable.
The advantage of this design is that it does not use spray nozzles. This is a rather expensive part that often gets clogged. The disadvantages include the inability to regulate the supply and spraying of liquid.
Method No. 3
Let's consider the option of manufacturing a more bulky, and therefore more productive design. Such sprayers are suitable for a tractor and can be used over large areas. To make it you will need:
- Metal container, volume 200-300 liters.
- Steel corner for making a frame.
- Round pipes.
- 12 V electric pump.
We weld the frame from the corner and supplement the structure with pipes on which the sprayers are installed. A liquid tank is also installed on the frame, inside of which the pump is mounted. The sprayer is mounted to a tractor hitch, the drive to the pump goes through the power take-off shaft.
Note that the spray bar can be made movable in order to regulate watering depending on external conditions. To do this, you can use a screw from a car jack. The lifting mechanism will be controlled by the tractor's hydraulics.
This sprayer will cope well with processing potato fields. Optimally suitable for working on areas over 20 acres.
Please note that only homemade sprayer options are shown here. You can make changes and improve the design as you wish.
TELL YOUR FRIENDS
In contact with
From timely and quality use of special means When growing a crop, the quality of the products grown, its productivity, and, ultimately, the return on financial and physical investments depend.
Every gardener wants to please himself and his loved ones with a harvest grown with his own hands, which can be preserved and increased in the future.
A garden sprayer is an important and highly effective tool in the competent organization of work in the garden, allowing you to protect the plant, fertilize it on time, carry out preventive maintenance, while using a minimum of harmful substances, acting selectively and accurately.
How does a garden sprayer work?
Any sprayer works according to pressure difference principle ambient air and working fluid (chemicals or fertilizers) located in a sealed container. Zhuk, manual pump, Stanley, gasoline backpack and garden sprayers work on the same principle.
Due to high pressure, the liquid tends to escape out and when the valve is opened, it passes through a flexible hose and a hollow telescopic “fishing rod” with sprayers and nozzles, spraying in the form of a cloud, a fan, a stream, or a combination.
The working fluid pressure is created in various ways, depending on the device and purpose of the sprayer. This can be a powerful motorized device for spraying trees 5-10 m tall or a simple manual sprayer for plants in a flowerbed.
For more information about garden sprayers, watch the video below:
Classification according to the method of creating working fluid pressure
Motorized sprayers
The most powerful garden sprayers include motorized sprayers; atomization occurs under the pressure of a stream of air created by a diaphragm-type pump driven by a small engine, usually a gasoline engine.
Membrane type
Diaphragm type pump (diaphragm, diaphragm pump) is a volumetric pump, where the working body is flexible plate, secured at the edges. Under the influence of some mechanism or force, the plate bends, performing the function of a piston pushing the working fluid.
Electric backpack
A slightly less powerful class is the electric backpack garden sprayer. The diaphragm type pump receives energy from a 12 volt battery.
Due to its optimal power and size, this sprayer has received wide recognition and is often used not only for its intended purpose; and for example, for window cleaning or as a spray during construction and renovation. You can also make a foam generator for washing with your own hands. The working fluid is located in a backpack container behind the operator’s back.
Garden backpack
A manual garden backpack sprayer is the most simple, convenient and versatile option. The pressure in it is created by manually moving a special lever that controls the pump pump. Increased pressure is created in a special pump chamber, from where the liquid is supplied to the spraying system.
Pump-action
A pump pump is cylinder with a moving piston; at the end of the housing there is a valve to admit pumped air into the working area and to prevent it from leaving, thereby pumping up increased pressure of the working fluid.
Backpack manual
There are also manual backpack sprayers with pressure pump pump pump directly into the container with working fluid. Their disadvantage is that the design of the seams of the working container is not always strong; as a result, the seams may separate, which can lead to burns for the operator.
Video about how to choose the right sprayer.
Be careful when choosing these models.
Pump-action on a belt
An automobile electric pump is initially designed for a pressure of up to 3-4 atmospheres and often has a built-in pressure indicator.
Stages of work:
- A hole is marked on the cylinder where the nipple will be installed. It is better to mark closer to the neck for ease of future connections.
- The hole is drilled slightly smaller than the diameter of the nipple neck to ensure tight installation.
- The rubber seal of the nipple is lubricated with liquid soap and, using pliers, the nipple is installed in the drilled hole. Once installed, the nipple should hold pressure.
Pump assembly and connection:
- pour the required amount of liquid into the container;
- connect the pump hose to the nipple on the cylinder;
- connect the wires of the battery and car pump, observing the polarity;
- turn on the pump and watch the pressure readings; when the pressure reaches 2.5-3 atm, turn off the pump;
- check the sprayer in operation.
After setting the required jet quality, the system is configured and ready for use. Next, the pump and battery need to be attached to the sprayer bottle. Any rectangular bag of the required size is suitable for this. It is advisable to make a hole in it for reading the pressure gauge.
For additional fastening to the bag, you can sew “Velcro” straps on top and bottom; the upper part of the straps will “encircle” the neck of the cylinder, the lower part – its middle part, making it possible to easily dismantle the entire structure.
12V 10Ah battery is enough for charging two cylinders with a capacity of 5 liters, while charging a battery of the specified capacity can take up to 10 hours. If this is not enough to complete all the work, you can purchase a second battery and charge them alternately.
And finally, the simplest option. How to make a sprayer from a simple plastic bottle. If you have a desire to increase spraying productivity without purchasing expensive devices, you can get by with little effort.
For this you will need:
- a children's bicycle pump accidentally found on the mezzanine (or its store-bought equivalent Puky HP-25);
- plastic bottle of the required volume;
- bicycle nipple;
- a spray bottle (a spray nozzle screwed onto the neck of a standard plastic bottle);
- needle nose pliers.
Procedure:
- We cut out a nipple from an old bicycle inner tube along with the round rubber section into which it is glued. The diameter of the rubber “washer” is about the size of an average coin; it will serve as an internal seal.
- We unscrew the sealing nut from the nipple body - it will tighten the connection from the outside.
- We drill a hole in the upper part of the plastic bottle with a diameter for the nipple.
- We insert the nipple into the neck of the plastic bottle and “catch” it inside using two knitting needles, directing it into the drilled hole.
- We grab it with needle nose pliers and pull the nipple out, pressing the rubber seal against the wall from the inside.
- Place a couple of drops of waterproof glue onto the hole between the nipple and the edges of the drilled hole.
- We cut out the second rubber sealing washer from the bicycle inner tube and, after the glue has dried, carefully put it on the nipple.
- Screw the nut on top of the nipple until it stops.
All that remains is to screw the hose from the pump to the nipple, fill in the liquid and screw the spray bottle onto the neck.
If the size of the plastic bottle is noticeably larger than the liquid intake pipe that comes with the spray bottle, any plastic tube of the same diameter will do for replacement; the main thing is that she reached the bottom and had a slightly “oblique” cut.
After installing the spray bottle, you need to secure the pump with transparent tape to the bottle.
The pump handle in the closed position should be slightly higher than the neck of the plastic bottle and spray bottle, so that your fingers do not touch its walls and interfere with the pumping process, and also so that the handle does not interfere with unscrewing the spray bottle.
Make several pumping movements with the pump, feeling how the walls of the bottle become elastic. After inflating the container to almost the density of a “soda bottle,” you can press the spray handle. The jet pressure and the absence of the need for frequent pumping will pleasantly please you.
Conclusion
Modern imported devices are not always economically profitable in our unstable climate, when it is not always possible to harvest a single crop. Russian products do not always reach the required level in terms of quality and reliability.
But this only means that by showing ingenuity and ingenuity, you can collect no less effective and reliable DIY copies that are not inferior to the best examples, albeit not in design, but in reliability and overall efficiency.
A sprayer is an extremely necessary tool at the dacha, allowing you to efficiently treat all planted crops with insecticides and fungicides, apply fertilizing, sprinkling, etc.
Currently, the industry produces a huge number of different sprayers for both private farms and large agricultural enterprises. At the same time, many gardeners prefer to save money and either make do with old-fashioned methods (brooms) or use homemade devices.
How to make a garden sprayer using improvised materials with your own hands - this is the topic that is discussed in this article.
Advantages of a homemade unit
Such products, as a rule, are created according to the simplest scheme, and therefore repairs are quite simple, and spare parts will not be difficult to find.
A new sprayer costs a lot, but even expensive industrial models, unfortunately, do not last particularly long - they can rarely be used for more than 10 years. That is why a homemade analogue is preferable, because it allows you to save a lot even in a situation where individual components have to be purchased.
Since all homemade spraying devices are made according to the same patterns as factory ones, it would be a good idea to familiarize yourself with the modifications available on the market.
The most reliable option is a manual pump sprayer. It is quite suitable for a small dacha or maintaining a local flower garden. It works from a hand pump, which pumps air into the tank. The latter, creating working pressure, pushes liquid from the container into a hose, at the end of which there is a special nozzle - a sprinkler. It is thanks to this detail that water is transformed into a cloud of tiny drops. The process stops after the pressure in the tank decreases and resumes after pumping air.
A hydraulic sprayer is usually the cheapest. In general, it functions on the same principle as the previously described pump pump, but here you have to pump air into the container continuously. It is quite difficult to treat large areas with such a device.
Motorized sprayers are equipped with an internal combustion engine running on gasoline. This option will cost the consumer a substantial amount, and for a standard dacha it is too powerful.
If you still have a working old Soviet vacuum cleaner on your farm, then you won’t have to do practically anything. It will be enough to lengthen the hose and attach it to the blowing hole. Included with any such unit is a special nozzle-lid, which is placed on a standard jar with a spray product. In the old days, it was most often used to whitewash walls and ceilings in apartments during renovations.
If the spray nozzle is lost, it is not difficult to make it yourself. Just connect the vacuum cleaner hose hermetically to the simplest hand sprayer - and the device is ready.
Hand sprayer
This device is also not difficult to assemble - any hardware store sells nozzle guns for plastic bottles. They cost pennies and can last one or even several seasons. The only drawback of this sprayer is that your hand gets tired very quickly. Therefore, it is advisable to acquire one only if you have to cultivate small plantings.
Electric
This model will allow you to spray more areas. It is quite easy to assemble using these instructions.
You will need to prepare:
- a suitable cylinder that can withstand pressure (suitable for a fire extinguisher);
- compressor (car battery or regular, powered);
- battery or extension cord;
- check valve;
- a rod (rod) for spraying compounds.
The cylinder can also be made from:
- milk can;
- beer keg (keg);
- old tank from a broken sprayer, etc.
A hole suitable in size for a car nipple is drilled in the container. The compressor is connected through it. To make the connection tight, silicone or rubber gaskets are used.
The ideal option would be to use an old cylinder from a broken sprinkler - you won’t have to install a spray bar on it. If it has become unusable, then such a part can be purchased separately in the store. In other cases, a hole for the rod is also made in the adapted tanks.
Next, all that remains is to connect the power to the compressor. As soon as sufficient pressure is built up in the tank, the sprayer will start working. For convenience, it is better to place all equipment on a cart. When using a corded option, purchase a carrier that is long enough to reach the farthest corners of your property.
Contactless washing
Having your own electric sprayer, it is not difficult to adapt it to wash your car. As you know, contactless washing is not a cheap pleasure. Specialists charge at least 300 rubles for it. At the same time, equipment, even the most budget one, will cost 15 thousand.
However, if you purchase only a foam generator and attach it to a sprayer, then you can avoid car wash services for a long time.
Rules for working with the sprayer
Whatever chemicals you use in your dacha, remember that they are all extremely harmful to health, so be sure to wear personal protective equipment:
- rubber or latex gloves;
- glasses;
- respirator or gauze mask.
If you don't have a special rubber suit, use a regular rain jacket with long sleeves and a hood instead. Try to completely protect your skin from insecticides.
