How to make a paper tank with your own hands. How to make a tank out of paper? How to make a paper tank video

If you use your imagination, you and your children can create an original and interesting craft in the form of a paper tank. Moreover, if you do everything correctly, performing each stage of the work correctly, you can end up with a tank similar to the legendary T-34.

You can view a finished photo of an origami tank on the Internet, thereby having an idea of ​​what the end result should be. This is an interesting activity for children, allowing them to develop logic, motor skills, but also, of course, the opportunity to create something with their own hands.

Origami paper Tank. Peculiarities

In general, there is nothing complicated in such a craft, and with a little effort, even an inexperienced child can do it. Even if your baby cannot do this, he will definitely be interested in watching you do this work, turning an ordinary sheet of paper into a real work of art, especially since the instructions on how to make a tank will be described in detail.

Instructions

The first thing you need to do is fold the tank correctly. For these purposes, you will need to take an A4 sheet intended for the body of the product, the turret, but also, of course, a sheet for notes, a piece of paper for the barrel.

It should be noted that a step-by-step origami tank for beginners will allow you to easily turn such ideas and ideas into reality.

We all know very well that children love military equipment. Today we will talk about the tank. But the conversation will not be about a metal military machine that works on the battlefield, but about a paper craft, a toy. Boys are the future defenders of the Motherland, the country.

Making a paper tank is extremely interesting. So, it is necessary to tell how we will make crafts of military equipment with our own hands. To work, you will need PVA glue, colored paper (cardboard) in green and red, and, of course, scissors. As an addition, take a pencil and ruler.

Paper tank for beginners, master class

Initially, we begin to create tracks for the combat vehicle. Two strips of paper are cut out three centimeters wide and 22 centimeters long. Next, you need to carefully bend the strips to make a ring. We glue the edges with PVA.

A rectangular shape is cut out of green paper. We take the dimensions 8 by 14 centimeters. Now you need to retreat about half a millimeter from both edges and mark with a line. Now from each resulting line we measure three centimeters to the center of the figure. We draw lines. Be sure to check the evenness of the measured lines several times.

Now we make bends along the marked lines so that we get the body of the future tank. The next task is to make a tank turret. Cut out a rectangle from green cardboard. Dimensions – 8 by 10 centimeters. From the edges we measure a distance of 5 millimeters and 2 centimeters. We draw bends along the lines.

From a rectangle measuring 6 by 10 centimeters, cut out a rectangle and fold it in half twice. We make a triangular shape for the barrel. To do this, we make cuts along the edges and glue the part.

Once all the parts of the tank are ready, we begin assembling it. Initially, the barrel is glued to the turret, and then the turret itself is glued to the hull.

DIY paper tank, diagram for beginners

Why did we need red cardboard? And so that now we can cut out a star and stick it on the front side of our military equipment from paper.

That's all. The work takes about half an hour even for beginners. Your child will be happy to do this kind of activity and teach it to his friends.

All the guys love to handle toy military equipment - inventing plans for operations, sending soldiers on reconnaissance missions, transporting tanks to certain positions. Most often, these are purchased toys, interesting, expensive, but often break in children's hands. And if your child starts a large-scale battle, but there are not enough toys, work with your child and explain to him how to make a paper tank with your own hands.

Plain paper tank

Beginners should try making a tank. You can try to make a standard model with your own hands.

To do this you will need a piece of plain A4 paper.

Step-by-step instruction:

This instruction will help you understand how to make a paper tank with your own hands. Most often they like to make the KV-1 tank from paper, but it is very difficult for children, so you should start with simple crafts that you can do together with your child.

Cardboard craft

Many people want to create a thicker tank and are interested in how to make such a toy from cardboard or strong paper. The basic manufacturing procedure, of course, can be different for each person. In addition, the technique for creating some models will not be clear to a beginner. But this cardboard tank model can be done by anyone, even those who have no experience.

Detailed job description

Detailed step-by-step instructions will help you cope with any task. You can create a tank from thick paper or cardboard as follows:

That's it, the work is completed. In a similar way, you can make a Tiger tank out of paper. Having learned to create standard machines, You can try a more complicated design. Having made a cardboard tank in the form of the first toy, the boy will move on to the next craft. This can be not only certain types of armored vehicles, but also motorcycles, mopeds, jeeps, vans, helicopters, airplanes and airplanes.

Who knows, maybe in a few years the baby will become an engineer of real sea vessels or volumetric spaceships. And it all started with an ordinary toy, which in appearance was more like a simple box, and not a model of military equipment. Therefore, it is necessary from childhood to instill in children the ability to think correctly and develop the desire to bring their fantasies to life.

The interest and desire to create models of a combat vehicle, such as a tank, arises mainly among boys. However, there is no fundamental gradation or recommendation for creating this craft.

A tank can be created by absolutely anyone who has expressed a desire and curiosity for this type of craft.

Regular paper tank

For beginning designers, you should start with the simplest model of a tank. To create a model, you need to prepare the following materials and tools:

1. Any sheet of A4 paper;
2. Ruler or other measuring tool;
3. Scissors;
4. The pencil is simple;
5. Paints/markers/colored pencils;
6. Paper glue.

Having prepared the materials, we begin making the model. The model is created as follows:

1. Divide the paper into the following parts, the main part of the sheet is 27 x 5 cm, the small part is 5 x 3 cm;
2. Bend the corner of the main part from the smallest side, then straighten it;
3. Perform step 2 for the opposite corner;
4. It is necessary to fold the corner so that it turns out to be a multi-layer triangle resembling the shape of the letter “X”;
5. For the second side of the main part, perform the same operations;
6. Fold the top corners in half again upwards to form a diamond;
7. For the other side, fold the upper corners inward, also getting a rhombus;
8. Place the product with its wide side facing you, and perform the operation of connecting opposite rhombuses, forming an arc;
9. The connecting rhombuses form a so-called tower. To make a cannon, you need to take a small piece of paper and roll it into a tube and insert it into the tower;
10. By bending the edges you can get tracks.

For the best reliability, the structure can be strengthened with glue, and for the visual effect of the tank, it can be decorated. This completes the first model of the tank. It is unlikely that it will look original and unique, but it will still please you.

Paper heavy tank KV-1

Let's consider creating a more complex tank model.

Which will be much more difficult to do. Naturally, creating such a tank will take longer. However, the result will definitely please you with its beauty and similarity to the original.

There are many drawings of ready-made models on the Internet. Making a model of the KV-1 tank will take a huge amount of time. You also need to have a good supply of time, including patience, attentiveness and, of course, accuracy.

Models this complex are usually made by people who already have some experience in paper crafts.

You need to take a sheet of A4 paper, usually take the same color in which the finished model will be made. Typically, colors for a tank are taken that correspond to the camouflage of military equipment, which is selected based on the area of ​​use. A sheet of paper needs to be folded so as to get 32 ​​uniform small squares, then cut them along the fold lines.

Fold one of the resulting squares into two parts, then bend it, and direct the upper corners to the fold line, obtaining a small triangle. The remaining sides need to be bent at the corners and then laid in half.

Perform such operations with all other squares, which will be the main material for creating the tank. This creation technology can be suitable for many models of heavy equipment.

A tank of this model contains about 5 thousand parts. As a rule, these details are prepared in advance, but no one forbids them to be made during the manufacturing process of the model. Basic assembly operations are performed from modeling the body. Model parts that are a form that allows you to nest inside each other. Trying to assemble the subassemblies very carefully and without damaging the parts, resulting in a body part consisting of 14 parts.

Performing such operations will help achieve a good level of quality and uniqueness of the tank. Tank elements are assembled by choice.

Making paper tanks is not a difficult task, as it might seem at first glance.

Print Thank you, great lesson +5

This origami craft model is a T-90 tank. Both children and adults will enjoy making it. And to make it come out beautiful, refer to this master class.

• A4 sheet of paper
• A small rectangle of the same tone

Step-by-step photo lesson:

Fold the A4 sheet in half.

Now you can bend the lower side corners up.

Open and bend the top and side corners down.

We open and finally bend the sides halfway so that the resulting vertical fold line passes through the center of the intersection of the two folds.

Let's open it. On each side we begin to bend the sides so that they turn into triangles. To do this, bend both fingers at the bottom and top sides. Close them together and place them on the left side. These folded sides will hide under one corner.

Let's do the same on the other side.

Then, without touching the side corners, bend the lower horizontal side in half upwards.

Then we will do the same with the upper part.

Bend these sides back halfway. We choose one side. For example, the right one. Bend the side corners to the center.

We completely turn over our tank blank. Let's divide the entire segment into three equal parts. To do this, we will make fold lines so that we know the boundaries.

We first sew the right part, and on top of it - the left.

Bend the corners of the triangle to the top point. Then we will open it.

On the sides of this triangle you can find “pockets”. That’s why we hide the side corners there along a bent line.

We connect one part to another. We straighten our finished paper tank.

Finally, we'll make him a cannon. After all, what is a tank without a gun?! To do this, take a small rectangle and roll it into a tube. If necessary, you can secure the edges with glue.

We insert the cannon into the small hole.

With this our T-90 paper tank is ready. You can color it with colored pencils or felt-tip pens at your discretion.