DIY phone case

There is probably not a person today who does not have his own mobile phone. They are used by everyone, everywhere: both the older generation and the younger. On the mobile accessories market you can find an endless variety of different cases for mobile phones. If you are used to being original and different from everyone else, then you will like this article.

Here you can find out how to make a phone case with your own hands, and what you need to have on hand for this. Original and simple ideas are waiting for you in the article today.

How to make a phone case out of paper?

Do you want to protect your mobile phone from scratches, cheaply and quickly? There is such an option - making a cover from plain paper. If you don’t have a case yet, but you need to run, drive, go somewhere, and you want your mobile phone to remain safe and sound throughout your trip, and you’re running out of time, the case in question is exactly what you need necessary.

So, the only thing we need to create the “protection” in question is a sheet of paper - in this case we will not use either scissors or glue:

1. Place a sheet of paper on the table in a horizontal position. You choose the color and size yourself.
2. Place your mobile phone on the left edge of the sheet so that there is room for a fold.
3. We begin to wrap the phone in paper, straightening out all the folds. We do this until the end of the sheet.
4. We bring the two ends of the sheet together and smooth them out. This will be the back of our paper cover.
5. Fold the bottom of the sheet up. We make several folds to the bottom of the phone case so that the case fits the size of the mobile phone.
6. We take the phone out of the case to make it easier to wrap the corners. This maneuver is done to ensure that the cover holds the shape we created.

The paper case is ready for use. It will take you no more than three minutes to “create” it, so this method of making “protection” for a mobile device is not only simple, but also quick. Now your phone is reliably protected from scratches and rain, and you can take it with you anywhere with peace of mind.

If you want, you can paint it or cut out a “window” for the screen and speaker so that you don’t even have to take it out, but in this case the screen needs to be covered with a protective film.

Now you're aware how to make your own phone case from a regular sheet of paper. Please note that in this case you will not need any glue or tape.

How to make a phone case from rubber bands?

Rainbow rubber bands have been a hit for more than one season. With them it is very easy to do different hairstyles and create interesting crafts. Today we will find out how to independently weave a bright summer case for your mobile device from rubber bands of different colors.

For this we need:

• 800 rubber bands (choose your own color palette)
• hook and weaving machine

A short list of necessary tools does not indicate the simplicity of the product, because making such a case will require patience, perseverance and inspiration to craft. It’s impossible to say that making such a case is easy, because the process is quite lengthy.

Detailed manufacturing instructions:

1. First of all, you need to decide on the number of colors from which your case will be made (the optimal option is 10 colors).
2. To weave a case for a modern smartphone, you only need two rows of the machine. In the situation under consideration, the central row will not be needed, because we will use only two side rows. For convenience, the row in the center can be removed (if your machine has more rows, they can also be removed for convenience).

1. The placement of the columns themselves in the machine is very important. On one side, the open parts of the columns should point in one direction, and on the other side of the machine, in the opposite direction.
2. We choose what color we will start our weaving with (in the example it will be black).
3. We take an elastic band and carefully throw it on the first column in a row of eight, hooking it with its other end to the second column diagonally, it turns out that from the first column on the right, we throw it on the second column on the left.
4. Thus, we put on 10 elastic bands of the same color diagonally.
5. We turn the machine over and begin to throw rubber bands diagonally in the same way so that we get x-shaped figures.
6. We put one elastic band on the outer columns of the machine exactly vertically, on one side and the other.
7. Use your fingers to lower the elastic bands you have put on to the very bottom to make it easier to put on the next rows of elastic bands.
8. The next pair of elastic bands (of a different color) must be thrown from one column to another in the same row, from right to left. Continue this way until the end of the row, using two elastic bands of each color.
9. Perform the same “maneuver” on the other side of the machine.

1. Each row of elastic bands must be secured on the sides with black elastic bands, as in the first row.
2. Now we need a hook to start weaving. On all columns you need to remove the two bottom elastic bands. It turns out that we throw on one row, then we throw off the two lower elastic bands - this will be our weaving.
3. We hook the two bottom elastic bands and move them to the center. We do this with each column on both sides of the machine.
4. We lower all the elastic bands down for easy throwing and weaving of the next row of elastic bands.
5. To make the color transitions on the cover smoother, you need to add the next row of elastic bands, moving the color one column. To prevent the first column from being empty, you need to put an elastic band of a different color on it.

1. Now we repeat everything, starting from the eleventh point, each time shifting the color by one column for a smooth transition. We secure each row with a black elastic band.

The process of weaving a cover under consideration is quite long, and it is very difficult to complete the work in one go.

Once the bottom of the case is large enough, you need to check how many more rows you need to make in order for your phone to fit into it. To do this, you just need to put the phone into the made part of the case.

1. You also need to finish weaving the cover correctly. So, take a hook, grab two rubber bands on the first column in the row on the left, carefully remove them and transfer them to the next column.
2. We do this with each column in the row. We repeat in the same way with the columns in the other row.

1. The cover is ready, we remove it from our machine and try it on our mobile device.

This work is quite painstaking, but the result is worth it. The brightness and originality of the case will delight you.

How to make a phone case from a balloon?

If you use your imagination, you can come up with and “make” unusual and beautiful things with your own hands, for example, you can make an excellent case for your smartphone from an ordinary inflatable ball. Let's find out how to make a phone case at home using a regular ball:

1. Inflate the ball. No need to inflate too big, a medium size balloon is what you need
2. Place it on a flat surface, holding the inflating area with your fingers so that the air does not escape
3. Place a mobile phone on top of the ball
4. We press it against the ball, gradually deflating the air from the ball with the other hand. We do it carefully and very slowly
5. As the ball descends, we press the phone harder against its surface

When the ball completely releases the air, it will tightly “wrap” your phone with its surface, thereby protecting it from moisture, dust and shock.

1. If the tip of the ball bothers you, just cut it off

This case is a budget option, it:

• cheap
• practical
• it's easy to make
• and you can change the colors of the case at least every day

In addition, this is a universal protection option, because it is suitable for most models of modern mobile devices and tablets.

How to make a phone case from glue?

Did you know that you can not only glue and glue with hot glue, you can use it to make an unusual, practical and original phone case. The size, shape and model of the device do not play any role in this case. So, to make our case perfect, we need:

• hot glue gun
• parchment paper
• scotch
• for decoration – colored varnishes

Everything is done very quickly and simply, let’s get started:

1. Turn on the gun to heat the glue in it.
2. While it is warming up, we need to wrap our phone in parchment paper. You need to do this in such a way that there are no folds or excess paper left on it; the parchment paper should wrap the phone tightly and in one layer (adhesive tape will help with this).
3. Spread parchment paper on a flat surface and place the phone on it.
4. We draw various patterns with hot glue on the surface of the parchment paper in which the mobile is wrapped (the design and patterns are chosen independently, based on preferences and drawing skill).
5. Don't forget to leave space for speakers, side charging holes and headphones.
6. We wait until the glue has completely hardened so that we can carefully remove the frozen case from the phone.
7. We decorate it with all kinds of colored varnishes.

The main advantage of such a case is its originality and uniqueness. No one else will have such a case except you. You are now aware how to make a phone case with hot glue.

How to make a silicone phone case?

Probably, few people have encountered making something from silicone on their own. It turns out that not everything is as complicated as it might seem. So let's find out how to make a phone case made of silicone. We will need:

• disposable plate
• starch (potato or corn)
• silicone
• paints

Instructions for making a silicone case:

1. Pour some starch onto a plastic plate. It can be purchased at any grocery store or supermarket.
2. Pour a little silicone on top of the starch and carefully combine these two ingredients.
3. Add paints to the prepared “dough” (choose colors according to your taste) to get the color we need.
4. Knead the silicone like plasticine until it is soft and elastic and its color becomes uniform.
5. Now you need to start preparing your phone. To do this, you need to wrap it over the entire surface with cling film.
6. Sprinkle the table with starch so that the silicone does not stick to the surface, and begin to roll out the silicone “ball” we have made with a rolling pin.
7. We put the phone on top and form a case.
8. We remove all irregularities and excess starch with a rag, but only be sure to dry it.
9. Trim off any unnecessary excess silicone.
10. From the leftover silicone mixture you can make additional molds, patterns, and decor for the case.
11. We glue them to the case with silicone.
12. We cut out holes for the sensor, microphone and headset.

If you wish, you can decorate the case in any color.

How to make a book case for a phone?

Today, book cases have become a popular way to protect phones and tablets. Let's find out how to make a phone case from cardboard and felt without outside help to get a model of a case - a book, without spending more than 15 minutes.

Prepare immediately:

• cardboard (preferably thick)
• felt - several colors
• scissors
• elastic band for clothes
• cutter
• optional - self-adhesive decor in the form of rhinestones
• ruler with pencil
• glue gun

Manufacturing instructions:

1. You need to cut out three blanks from thick cardboard that will be identical to the size of your phone. To do this, place the phone on cardboard, trace the outline with a pencil, and cut it out. Duplicate the workpiece two more times.
2. We cut one of the cut-out pieces in half with scissors or a cutter.
3. We take A4 size felt and glue two halves of the cut piece onto it at a distance of 7 mm from each other.

1. We glue another whole blank to the felt at a distance of 3 cm from the previous blank.
2. We cut off the excess felt, leaving allowances to cover our cardboard with.
3. Glue felt of a different color onto the whole piece and one of the halves of the second piece.
4. The last piece of cardboard needs to be covered with felt of the same color as was used in the previous paragraph.
5. We glue small rubber bands on the edges of it, which will hold our mobile phone.
6. We glue the blank with elastic bands onto the part of the cardboard that remained unglued on the first part of our future cover.
7. We glue Velcro to the finished case, which will serve as a fastener.
8. We decorate the book case with rhinestones, stickers or beads.

If desired, the same the cover can be made of leather or any other fabric.

If you decide to “make” a phone case with your own hands, for these purposes you can use various available materials in the form of felt, silicone, fabric, glue, etc. The main thing here is your imagination and the desire to make something original and unusual with your own hands. The methods presented above are very simple and do not require any special expenses, so choose any of them, and go ahead and create your “works of art.”

Video: “How to make a phone case?”

Today, stores sell a large number of cases for smartphones, but when it comes time to choose a product for your phone model, there is no suitable one or there is little choice. That is why we advise you to familiarize yourself with the options and ideas on how to make a case.

Everyone wants to be unique and stand out from others, so our instructions will help you create a beautiful and comfortable case for your phone.

Paper case

The simplest and most budget option, which can be assembled very quickly using the origami technique. Of course, you shouldn’t expect a long time of use, but if you need to protect your phone here and now, then this option will be perfect.

For assembly you will need an A4 sheet of paper and PVA glue. You need to fold the phone into paper so that you end up with an envelope. For reliability, you can glue the joints and bends so that the cover holds better.

Hot glue

What can you make a phone case from? From hot glue. This approach will allow you to create your own pattern as you see it. All you need to make is a glue gun with glue, nail polish, tape and parchment paper.

The first step is to wrap the phone tightly in paper and glue the seams on the screen. On top of the paper, it is important to mark the sockets, connectors and control buttons, then use glue to glue it around the perimeter of the phone, and then smoothly move on to the patterns on the back of the smartphone so that the structure is solid. When the product is dry, you need to remove it and paint it in your favorite color.

Book

Such phone cases can be made of leather and fabric, but we will consider a simpler model that can be upgraded if desired. To create, you will need a notepad with an elastic band, suitable in size for the phone, a stationery knife and ruler, a pencil, glue, felt, cardboard and an eraser.

It is necessary to cut out sheets from the notebook and prepare it for further work. The next step is to glue the felt along the entire inner surface of the notepad. Next, you need to glue rubber bands on the top and bottom of the notepad, where the smartphone will be attached.

It is necessary to make this as tight as possible so that the device does not slip out. If desired, the notebook can be decorated or left as is, in which case at first glance it will seem that it is actually a notebook.

Felt

Now we’ll learn how to properly sew a phone case. Production does not require a lot of materials, and the work does not take much time; moreover, the cover comes in the form of a pocket.

So, for production you will need felt, you can take different colors, a needle, a ruler, scissors, thread and a glue gun. You need to place the phone on the fabric and mark the edges, and then cut it out with 1 cm indentations on each side.

When two such blanks are ready, they must be sewn together with an outer seam. When finished, you can decorate the case or attach a clasp to prevent the phone from flying out of the pocket.

Fabric cover

Knitting and weaving fabric covers with your own hands is also common, so you can make such a product literally before your eyes. To do this, you need thick fabric, threads, a needle, acrylic paints, colored paper, scissors, glue and a stencil.

First, you need to cut two identical blanks from fabric according to the size of the phone with free edges. On one side you can draw a design that will appear on the back cover of the phone. You can use cardboard to make an elastic frame from the back of the phone.

When all this is ready, you need to sew both halves together from the inside out, and then turn the cover out. You can see photos of similar handmade smartphone cases in the article.

In this article, we looked at several master classes on do-it-yourself smartphone cases. You can always add to them or come up with your own version based on the instructions provided.

Note!

A case can be made from literally anything that is at hand, you just need to use your imagination. Moreover, such cases can be presented as a gift, which is always needed. We wish you creative success.

Photos of DIY phone cases

Note!

Note!

Without a case, our phone feels very uncomfortable - just in case it gets accidentally scratched or dropped. Of course, now there are phone models on sale that are not afraid of scratches or other damage. But they are not available to everyone, and it is even more pleasant to give yourself or your loved ones a gift created with your own hands. In this master class we will tell you how to sew a phone case with your own hands.

Required materials and tools:

• dense fabric for the main, front and rear parts of the exterior;
• thick fabric for accent;
• lining fabric;
• twill tape;
• Velcro;
• metal or plastic ring;
• lightning;
• threads;
• transparent ruler;
• chalk;
• iron and ironing board;
• scissors;
• roulette;
• tailor's supplies;
• sewing machine.

Cut out the details of the case

Today we will tell you how to sew a phone case with your own hands. First of all, download and print the template here. Cut out the pieces along the solid lines. From the fabric for the main, front and back parts of the exterior, we cut out the following parts: one rectangle measuring 12x19 cm. Cut one using the cover template. A pouch is cut from the front and accent fabric. From the fabric for the lining you need to cut two rectangles measuring 12x19 cm. Cut 22 cm from the twill tape. Cut 2.5 cm from the Velcro. Sew one Velcro to the front side of one outer part.

Sew on the ribbon

Place one piece of lining wrong sides together with the Velcro piece so that the Velcro is on the back side. Find the middle of the lining and draw a line. Attach twill tape to this line. Insert the metal ring. Sew using a sewing machine. Sew the ribbon crosswise as shown in the photo.

Sew on a zipper

Find two corner pieces or cut them out using a template. Fold the edges of each piece 0.5 cm and press with an iron. Take the zipper and place it between the two pieces. Sew using a sewing machine. Find the remaining piece of lining and fold the back side of it together with the front piece. Unzip and stitch along both sides and along the bottom edge.

Sew the details

On the front and back pieces, fold back the top edge and stitch using a sewing machine. Place the two main pieces right sides together. Use a sewing machine to sew along three sides and finish the edges with a zigzag stitch. Trim the seams and corners at the bottom edge. Turn right side out. Sew along the top edge again, catching the metal ring. Ready! That's how you learned how to sew a phone case.

A special case that prevents cracks and micro damage will help extend the service life of the phone. Today, stores offer a large selection of different models.

Most of us love unusual things that help us stand out from the crowd.

A large number of interchangeable covers and panels helps to diversify the design of a mobile phone.

Buying the necessary accessory is quite simple. It’s another matter to do it yourself from a variety of available materials.

Here you can emphasize your individuality and refined taste. Our material presents several ways to create a case with your own hands.

Materials for creating a protective case

How to make a case with your own hands? Everything is quite simple. The main requirement of the whole process is the availability of free time and good imagination.

Various materials can be used to make the accessory:

• felt;
• jeans;
• silicone film;
• wide elastic band;

Soft base materials protect your mobile phone from daily abuse. There are no scratches or cracks on the surface of the glass.

Tools for making a mobile accessory

These include:

• sharp scissors;
• ruler;
• button;
• glue;
• ribbon or long lace;
• sticky base.

When working with each material, it is necessary to take into account its properties. For example, felt does not fray at the edges when cutting out parts, while denim requires additional border design.

Silicone film does not like frequent exposure to a sharp needle. To do this, you need to use glue that dries in a few seconds.

The process of making a phone case

The initial stage of creating a case is the preliminary creation of the design of the future accessory. To do this, you can draw a sketch of the product on paper. It is important to consider the size of the phone, as well as the placement of the camera and microphone.

The finished case should be slightly larger than the size of the mobile phone. This will allow you to easily pull it out whenever necessary. Fabric accessories do not require specific sewing skills. Here you need to carefully sew two parts together.

The process of creating a case is divided into several stages:

• Cut out paper patterns.
• Transfer them to the material from which the cover will be made.
• Carefully cut out each piece, leaving 1 cm for seams. This technique allows you to sew the correct product, taking into account the parameters of a particular model.
• To join felt and denim, you will need a sharp needle and strong thread.
• Specialized glue will help you make a silicone phone case.
• When all the parts are connected to each other, you can fix the protective button, which will prevent the cover from constantly unfastening.

For people leading an active lifestyle, you will need a sports phone case. Thanks to the thick elastic band on the forearm, it fits well on the human body.

To do this, a small piece of thick elastic is sewn to the finished protective product. As it moves, it will press the mobile body tightly against your hand.

Note!

The design of the phone book case is a cover. The mobile phone case is fixed to one side, and the other part serves as a protective panel. A tight fit of the upper part of the cover will be ensured by small magnets that are fixed in the upper corners of the cover.

You can make additional sections for storing plastic cards using a multi-layer fabric structure.

To do this, you will need three fabric bases, which differ in size.

The first part of the pocket is sewn to the base of the cover. All other elements are sewn together and fixed to the previous parts of the cover.

Decorative elements will help you create an exclusive design for your phone accessory. Fabric appliques will add zest to your product. You should not use multi-colored details to decorate the case.

Note!

DIY phone case photo

Note!

We will conduct several master classes on making silicone, felt, knitted, leather cases, as well as amazing bumpers from a herbarium and a children's sock.

Case-herbarium

To make such a smartphone case with your own hands, prepare:

First, think over the composition, applying flowers in various variations to the surface of the cover. As soon as “the one” is found, we get to work:

1. Take a photo of the ideal layout to reference as you create.
2. Try to glue large and light parts first, and smaller and darker ones on top - under the influence of the resin, the plants will turn pale and become more transparent. Finally, sprinkle in glitter. Do not overdo it with details - the layer with vegetation should not be thicker than 1.5 mm.
3. Following the instructions, dilute the resin with water one to one.
4. Carefully pour the solution into the center. Then spread it over the entire surface of the painting, removing air bubbles.
5. Make sure that the resin solution does not overflow over the surface of the composition - in this case, quickly wipe it off with cotton swabs soaked in acetone.
6. The floral one for the smartphone will be ready after two hours of drying.

Silicone Case

You can make protective cases for smartphones from silicone yourself using:

Before making a smartphone case with your own hands, be sure to wear rubber gloves.

1. Mix 50 g of potato starch with approximately the same amount of sealant. Then knead this product to the consistency of plasticine, adding dye along the way so that the color is even.
2. Roll out the mass with a rolling pin or bottle on a flat surface to the desired thickness.
3. Cover all the holes of the phone with tape, then place it in the center of the resulting cake, pressing the device a little into it.
4. Then, using a spatula, bend the edges, making sure that the “pancake” fits perfectly to the smartphone.
5. Be prepared for the fact that the phone will lie “captivated” by this mass from 12 hours to a day - that’s how much the substance needs to harden.
6. Having taken out the phone, first remove the excess on the front, then cut holes for the camera, charger, headphones - they should be imprinted.

Felt cover

You can make a felt smartphone case with your own hands using:

And if you have a sewing machine:

1. Cut out two identical rectangles - the outer and inner sides. It is necessary to take into account the length, width and thickness of the device, as well as an allowance of 5 mm on each side for the seams.
2. On the outer side we cut off one corner diagonally, so that in the future it will become a convenient pocket.
3. Then place the parts one on top of the other (the outer pocket is on the outside), fold it in the shape of the phone and stitch, retreating 4 mm from the edge.
4. The felt does not fray, so there is no need to process the edges. If desired, decorate the product with a unique applique or patch - a universal smartphone case has been created!

Smartphone case

For this product you will need:

• leather or leatherette;
• a thin piece of plastic;
• universal glue;
• two flat magnets;
• awl, knife, scissors.

A leather case for a book-sized smartphone is made like this:

1. Cut 2 pieces of plastic to the exact shape of the phone, and make a hole for the camera on one of them.
2. Glue a magnet to the “back” plastic in the right place.
3. Glue both pieces of plastic to the skin, leaving a distance between them equal to the thickness of the gadget.
4. Wrap a piece of leather so as to completely hide the plastic inside it, and glue it in the right places.
5. From a piece of leather, wrap a second magnet in it, form a clasp, and carefully glue it to the front part.
6. Don’t forget to make the necessary cuts in the leather for the camera and other necessary holes.
7. Using double-sided tape, glue the device to the case.

Knitted cover

The most “cozy” smartphone case you can make with your own hands is from yarn, namely, by knitting it. You won't need a lot of materials:

Here you can use two methods:

1. The simplest and fastest. Knit two identical fabrics using your favorite pattern and sew them together. Cast on loops across the width of the smartphone and then knit lengthwise. You can cast on loops along the length of the device and knit it narrower in width.
2. Knit “in one piece” - the same way as socks are knitted. Cast on stitches equal to two phone widths and then divide onto four needles. Continue knitting according to the chosen pattern, using only knit stitches, until the length of the product is equal to the length of the smartphone.

You can crochet such a product using the first method.

Baby sock cover

Go shopping or order cute, original children's socks through the online market. You can easily make a case for your smartphone from them yourself. You will also need scissors, a needle and thread, various accessories for applique to suit your taste - beads, pendants, ribbons, rhinestones, etc.

1. Cut off the areas of the heel, sole of the foot and toes so that the remaining part has a rectangular outline.
2. Sew up the open hem.
3. Fold the remaining uncut fabric that was supposed to cover the top of the foot up and sew it on the sides - this will be a pocket.
4. Decorate your creation with the trinkets you have prepared - sew or carefully glue them to this unique sock case.