The packaging line includes

The TM-1 P set consists of a thermal knife module, a thermal tunnel, a receiving roller table with a cooling system for the finished product.

Functions of TM-1P:

1. Pusher, loaded by the operator, with the ability to adjust to the dimensions of the product.

2. Automatic film wrapping when the product is moved by a pusher, two film rewinding blocks facilitate and stabilize stable operation, a clamping device fixes the product during wrapping, protecting it from shifting and falling.

3. The thermal knife automatically lowers after wrapping, fixes the film with a clamp, solders two seams and cuts between them. All movements are carried out pneumatic drives Camozzi company.

4. Subsequent packages push the previous ones onto the thermal tunnel conveyor, passing between adjustable guides.

5. Heat shrinkage is carried out in the heat tunnel due to the convection of heated air, the temperature of which is maintained automatically.

6. Receiving roller conveyor with cooling unit for finished packaging.

TM-1P is:

High performance;

Easy to install and reliable in operation;

Small dimensions;

Low power consumption;

Adjusting the temperature in the chamber;

Savings on consumables;

Packaging of a wide range of products and goods.

The packaging line includes:

TM-1 thermal tunnel

TM-1P semi-automatic thermal knife

Basic specifications:

Productivity cycles/min (depending on the size of the item): 7

Dimensions of the assembled packaging line (length x width x height) excluding film, mm: 3010 x 1070 x 2000

Device weight, kg: 260

Climatic version according to GOST 15.150-69: UHL-4

Thermal tunnel/thermal knife control unit: separate

Characteristics of TM-1 thermal tunnel:

Version: module

dimensions in working position (length x width x height), mm: 2210 x 870 x 1730

Device weight, kg, net: 170

Maximum power consumption, kW: 12.27

Supply voltage, V/Hz: 380 / 50

Temperature adjustment range in the thermal tunnel, °C: 20 – 220

Characteristics of heating elements, pcs. x kW: 6x2

Conveyor dimensions (length x width), mm: 1800 x 540

Conveyor speed, m/min. 4

Conveyor belt link type: plate

Working load on the conveyor, kg/m2, no more: 50

Camera length, mm: 1200

Dimensions of the passage window of the thermal tunnel (width x height), mm: 600 x 400

Maximum dimensions of standard packaging (length x width x height), mm: 300x450x360

Characteristics of TM-1P thermal knife:

Version: module

Overall dimensions (length x width x height) without film, mm: 1030 x 1070 x 1750

Feed table length, mm: 630

Feed table width, mm: 765

Length of the working part of the thermal knife, mm: 610

Maximum film width, mm: 550

Air pressure in the line, MPa (kg/cm2): 4-6

Welding type: permanent

Device weight, kg, net: 90

Shrink film type: Polyethylene (PE) from 40 to 100 mic

The semi-automatic thermal packaging machine TM-1P is designed specifically for group packaging of small-sized products in polyethylene film various industries production. The machine allows you to package food and other products in containers made of metal, glass, plastic or paper.

Dense polyethylene packaging allows you to protect products from climatic conditions, contamination, spillage and, to some extent, mechanical damage. Shrink wrapping of cable coils and other products helps to detect whether they have been tampered with. The size of the packaged products is limited by the dimensions of the thermal chamber and is 350 x 450 x 360 mm. The supply of products to the heat chamber on this model is carried out manually. Each working cycle of the machine is fully automated and the operator only has to start each new cycle. The knife for cutting and sealing film is also automatic and equipped with a pneumatic pusher.

Set TM-1 P

The TM-1 P set consists of a thermal knife module, a thermal tunnel, a receiving roller table with a cooling system for the finished product.

1. Pusher, loaded by the operator, with the ability to adjust to the dimensions of the product.
2. Automatic film wrapping when the product is moved by a pusher, two film rewinding blocks facilitate and stabilize stable operation, a clamping device fixes the product during wrapping, protecting it from shifting and falling.
3. The thermal knife automatically lowers after wrapping, fixes the film with a clamp, solders two seams and cuts between them. All movements are carried out by pneumatic drives from Camozzi.
4. Subsequent packages push the previous ones onto the thermal tunnel conveyor, passing between adjustable guides.
5. Heat shrinkage is carried out in the thermal tunnel due to the convection of heated air, the temperature of which is maintained automatically.
6. Receiving roller conveyor with cooling unit for finished packaging.

Advantages

• High performance;
• Easy to install and reliable in operation;
• Small dimensions;
• Low power consumption;
• Adjusting the temperature in the chamber;
• Saving on consumables;
• Packaging of a wide range of products and goods.

Sequence of work

Preparation

Products are placed into a ladle on the grouping table.
The statement then starts the loop. A pusher with a bucket pushes the group from the preparation table through a sheet of shrink film to the packaging table.

The clamp secures the group on the packing table.
The actuators return the pusher with the bucket to initial position and you can load the next group of products into the bucket.

The working and counter parts of the thermoknife wrap the group, trim and weld the shrink film.
The cycle repeats.

The semi-automatic thermal packaging machine TM-1P M1 is designed for packaging food, cosmetic or other products in glass, metal, paper or plastic containers. To seal the film, a pneumatic knife is used, allowing the operator to accurately regulate the temperature and set exact time film sealing. Widely used in small industries with an average number of products. Packing speed depends solely on the operator’s skills. To operate the pneumatic pusher, you need to connect a compressor with a receiver of at least 100 liters, a capacity of at least 30 l/min and an output pressure of 4-6 atm (not included in the delivery package).

Machine composition:

• TM-1P thermal tunnel
• TM-1P semi-automatic thermal knife
• Receiving roller conveyor with product cooling system

Film type

• Polyethylene (PE)

Video of the operation of the semi-automatic thermo-packing machine TM-1P M1:

General characteristics cars:

Line productivity, pack/hour	350
Dimensions of the assembled machine (LxWxH), mm	3720x1400x2350
Device weight, kg	620
Climatic version according to GOST 15.150-69	UHL-4
Type of control unit for thermal chamber/thermal knife	Separated

Thermal chamber characteristics

Execution	Module
Overall dimensions in working position (LxWxH), mm	5400x1230x1850
Net weight of the device, kg	250
Maximum power consumption, kW	24,4
Power supply parameters, V/Hz	380/50
Heating temperature adjustment range, °C	20-220
Conveyor dimensions (LxW), mm	2400x910
Conveyor speed, m/min	Adjustable 0-8
Conveyor belt link type	plate
50
Camera length, mm	1200
Dimensions of the chamber passage window (WxH), mm	960x500
Maximum dimensions of packaged products (LxWxH), mm	600x600x400

Characteristics of the thermal knife:

Execution	Module
Overall dimensions (LxWxH) without film, mm	1800x1400x2350
Net weight of the device, kg	250
Feed table length, mm	1800
Feed table width, mm	1400
Length of the working part of the thermal knife, mm	960
Maximum film width, mm	900
Air pressure in the line, MPa	0,4-0,6 (4-6)
Welding type	Constant
Number of heating elements (trimming, film welding)	1
Power consumption at the moment of switching on, kW	Constant heating

Characteristics of the feeding roller table:

Characteristics of shrink film:

Thermal packaging machine TM-1P M1 is designed for packaging boxes large sizes, insulation, polystyrene foam, cable coils in heat-shrinkable polyethylene film.

Machine type: Semi-automatic

Film type: polyethylene (PE)

Composition of thermo packaging machine:

TM-1P thermal tunnel

TM-1P semi-automatic thermal knife

Receiving roller conveyor with a cooling system for finished products

Application:

Thermal packaging machine TM-1P M1 is used for packaging large boxes, air conditioners, air conditioners, roll insulation, thermal insulation basalt insulation, etc.

General characteristics of TM-1P M1 Line productivity (pack/hour)	no more than 350
Dimensions of the assembled machine, excluding film Length	5100 mm
Width	1400 mm
Height	2350 mm
Device weight	600 kg
Climatic design according to GOST 15.150-69	UHL-4
Type of control unit for thermal chamber/thermal knife	separated
Characteristics of the thermal chamber TM-1P M1 Execution	module
	2100 mm
Width	1230 mm
Height	1850 mm
Device net weight	250 kg
Maximum power consumption	24 kW
Supply voltage	380/50 V/Hz
Chamber temperature adjustment range	20-220 °C
Characteristics of heating elements	12 × 2 pcs × kW
Conveyor Dimensions Length	1800 mm
Width	910 mm
Conveyor speed	4 m/min
Conveyor belt link type	plate
no more than 50 kg/m2
Chamber length	1200 mm
Dimensions of chamber passage window Width	960 mm
Height	450 mm
Maximum dimensions of standard packaging	680 × 670 × 400 mm
Characteristics of thermal knife TM-1P M1 Execution	module
Overall dimensions in working position Length	1800 mm
Width	1400 mm
Height	2350 mm
Device net weight	250 kg
Feed table length	1800 mm
Feed table width	1400 mm
The length of the working part of the thermal knife	960 mm
Maximum film width	900 mm
Air pressure in the line	5 MPa (kg/cm2)
Welding type	constant
Number of heating elements (trimming, film welding)	1
Power consumption at switch-on (kW)	-
Characteristics of the receiving roller table Dimensions of the receiving roller table (length x width x height)	1200 x 910
Characteristics of shrink film Type of shrink film	polyethylene (PE)
Film winding type	canvas

DELIVERY:

1. Pickup
You can receive goods from the warehouse by prior agreement with the manager.

2. Transport companies:
“Business Lines”, “PEK”, “KIT”, “ExpressAuto”, “Jet Logistic” and others

PAYMENT:

1. Cash or card in the office
You can pay for your order at the Chelyabinsk office at Karl Marx 28A.

Functions of TM-1P:

1.Pusher, loaded by the operator, with the ability to adjust to the dimensions of the product.

2.Automatic film wrapping when the product is moved by a pusher, two film rewinding blocks facilitate and stabilize stable operation, a clamping device fixes the product during wrapping, protecting it from shifting and falling.

3.The thermal knife automatically lowers after wrapping, fixes the film with a clamp, solders two seams and cuts between them. All movements are carried out by pneumatic drives of the company "".

4. Subsequent packages push the previous ones onto the thermal tunnel conveyor, passing between adjustable guides.

5.Heat shrinkage is carried out in the heat tunnel due to the convection of heated air, the temperature of which is maintained automatically.

6. Receiving roller conveyor with cooling unit for finished packaging.

TM-1P is:

• High performance;
• Easy to install and reliable in operation;
• Small dimensions;
• Low power consumption;
• Adjusting the temperature in the chamber;
• Saving on consumables;
• Packaging of a wide range of products and goods.

The packaging line includes:

• TM-1 thermal tunnel
• TM-1P semi-automatic thermal knife

Sequence of work:

Preparation: Products are placed in a ladle on the grouping table.

• A pusher with a bucket pushes the group from the preparation table through the shrink film sheet to the packaging table (Fig.1)
• clamp secures the group on the packing table ;(Figure 2)
• the actuators return the pusher with the bucket to its original position and the next group of products can be loaded into the bucket;
• the working and mating parts of the thermal knife perform wrapping of the group, cutting and welding of the shrink film (Figure 3)
• the cycle repeats.

Receiving finished packaging:

• the next group of products advances the previous one from the packaging table to the thermal tunnel conveyor; (Figure 4)
• in the thermal tunnel the group moves along the conveyor and the film shrinks;
• From the thermal tunnel, the packaged group enters the receiving roller table with a cooling fan, cools down, and is removed by the operator. (Fig.5)

Main technical characteristics:

Productivity of cycles/min (depending on the dimensions of the item):
Dimensions of the assembled packaging line (length x width x height) excluding film, mm:	3010 x 1070 x 2000
Device weight, kg:
Climatic version according to GOST 15.150-69:
Thermal tunnel/thermal knife control unit:	separated
Characteristics of TM-1 thermal tunnel:
Execution:
Overall dimensions in working position (length x width x height), mm:	2210 x 870 x 1730
Device weight, kg, net:
Maximum power consumption, kW:
Supply voltage, V/Hz:
Temperature adjustment range in the thermal tunnel, °C:
Characteristics of heating elements, pcs. x kW:
Conveyor dimensions (length x width), mm:
Conveyor speed, m/min.
Conveyor belt link type:	plate
Camera length, mm:
Dimensions of the passage window of the thermal tunnel (width x height), mm:
Maximum dimensions of standard packaging (length x width x height), mm:
Characteristics of TM-1P thermal knife:
Execution:
Overall dimensions (length x width x height) without film, mm:	1030 x 1070 x 1750
Feed table length, mm:
Feed table width, mm:
Length of the working part of the thermal knife, mm:
Maximum film width, mm:
Air pressure in the line, MPa (kg/cm2):
Welding type:	constant
Device weight, kg, net:

Shrink film type: Polyethylene (PE) from 40 to 100 microns