Beaded poppies, different weaving techniques with your own hands (video)

Many people really like poppies in their various forms: in knitting, embroidery, weaving, and, of course, live ones. And when your beloved girl also likes these flowers, there is an even greater incentive to learn something new in needlework. Now we’ll look at how to weave a poppy from beads, in two versions at once. Before actually starting to weave poppies, a lot of material was studied, so now, based on experience, we can talk about how to weave poppies from beads, how to make them with your own hands. So, let's begin our master class.

Options for weaving poppies from beads

First method So, the first option. Take red beads of two different tones, as well as black beads for the poppy head and stamens. Weaving of poppy petals is done according to the type of leaves, in two parts. First the first half, then the second. Put on 9 beads. How exactly to place these two colors is decided by the performer; this is already outside the scope of the master class. It is necessary to round the top by inserting a needle into the third bead from the end. Next we work using the mosaic weaving technique.

Approaching the end of the row, we collect two beads. It turns out that a flat edge is formed in the middle, and bulges are formed closer to the edges. Then we weave again using the mosaic method. Approaching the next end, we collect another bead so that the edge does not have convex elements.

The mosaic is performed again in both directions, without reducing the number of rows with red beads.
Approaching the black beads, we bevel the weaving. There is no need to finish the row, you can continue weaving up to the penultimate bead, then put on one bead and wrap it on the next row.

In the future, we perform the same actions and mow the weaving again. Thus, the petal is almost finished. When we have beveled three times, we continue to weave in a mosaic manner, insert the needle into the bead marked with an arrow in the photo and tighten.

Then we put on the bead, pass the needle into the next protruding bead, pick up another one and pass the needle into the next bead (see photo).

After paying attention to the photo, you need to stretch the needle so as to exit the red bead located in the center.

Based on the principle of this element, the next - second part - is woven. First you need to put on the beads, then round them on the second part of the first row. Having completed the second part, finish the first in the same way.

Afterwards, the middle part is skipped (there is no need to put an additional bead above it). Next, you need to insert the needle and exit into the part that is beveled. Now we put on several beads and pull the needle into the convex bead, rounding the edges. The same actions are performed until the end of the edge (to the row of black beads).

Then we go along the black beads to the other half, rounding the edges. At the end of the weaving, you can go around the circle again to tighten and secure the edge.

So we weave 3 petals, after which they need to be sewn. As a result, we get a small poppy made of beads with three petals. In general, these flowers come with a different number of petals from 3 to 20! The process of stitching the petals occurs through the three outermost beads from each petal. We connect three petals together. You can make a few more of these small petals, combine them into a flower and make stamens for them.

Second method And here is the second version of the “beaded poppies” pattern: for a four-petaled flower. The flower also contains a poppy box and stamens. In our master class we will consider in more detail the following elements: petals and stamens.
Petals 37 red beads are collected onto a piece of 0.75m metal thread. They are advanced 0.07-0.09 m from the edge. take the end of the edge, pass it through the last one and pull it out. It turns out to be a loop. Nearby, the second knot is made of 39 beads. It is necessary to make 7 loops in the following sequence: 37,39,41,45, and then also but in decreasing order - 41,39,37. Place 22 beads on the current end and pass a metal thread through the top knot. They pull her up. Now 3 beads are put on and the wire is pulled in the same way through the top at the next knot. Knots are woven in the same way until the end of the row. After the seventh knot, 22 beads are put on and strengthened between the seventh and sixth loops. The ends of the wire are twisted.

Stamens Stamens are made in two types. First, take 0.45 m of wire, put 15 green beads on it and weave a loop near the end of the wire. According to this scheme, a total of 5 loops need to be made.
Place 10 beads on the working end and thread the wire through the top one in a loop. Tighten the wire well. Next, put 2 beads on the wire and pass it through the bead on the next loop. Braid all five loops. In order to combine the fifth and first loops, you need to cast on 2 beads and pass a metal thread through the top of the fifth loop. They tighten it up well. Collect 4 beads and thread it through the bead opposite. When tightened, put on 4 more beads and pass them through in the same way. Take this edge of the metal thread and insert it into the middle of the product so that the metal thread is pulled down. A poppy box came out.

Another type of stamen (needle) is woven with needle beads from black material. 14 black beads are placed on a 1.1 m metal thread. Place them near the end of the metal thread and pass the metal thread in the other direction through 13 beads.

Assembly Now it's time to assemble our flower. You need to wrap a poppy box on a strong wire, and around it the stamens. We screw our four petals perpendicularly.

All actions must be performed carefully, it is better to tie the knots tightly and make sure that the beads fit more tightly. And in general, work should bring joy. At least a hobby, for sure. This is still free time, which should bring pleasure. Inspiration is also important in this work: where would you be without it when you need to create art?
At this stage, our master class has come to an end. You can watch the beading process in more detail in the video. Video tutorials will show you the technique of weaving each detail of a poppy flower, so that in the future you can repeat the entire process.

Video: How to weave poppies from beads

Beading is quite a fascinating activity. You can weave anything from beads - a flower, a keychain, a toy, and even a whole bag. Many beautiful colors are obtained by simply interweaving thread with beads. The beaded poppy looks very realistic.

Usually this flower is made using mosaic weaving. Moreover, each petal is separate. After all the petals are woven, they must be collected into one flower. A diagram of beaded poppies will be presented below. We’ll also look at the step-by-step execution of this flower.

Tools and materials

To make a poppy from beads, you will need some materials and tools. First of all, you need beads - two colors for the petal and one for the leaves. For petals, the colors most often used are red and black, but you can also find other options, such as purple poppy and even blue.

Well, for the leaves, of course, green. The only difference is in the shades, which can be darker or lighter. It's up to your taste. Also, bead weaving of poppies, the diagrams of which will be presented below, requires a fishing line or thread threaded into a bead needle. To make the stems, use wire, which is wrapped with green floss threads. In addition to everything listed above, don’t forget scissors, glue, and wire cutters. Also, prepare your work area. Take care of the lighting, since beading still puts a certain strain on the visual organ. Cover the surface you will be working on with a soft, light-colored cloth. It is best if it is monochromatic. Beads are clearly visible on such fabric, and they do not crumble during operation.

Which beads to choose

There are simply a huge number of bead manufacturers, but all their products are divided into only three categories. The first includes beads produced in Taiwan, China and in the vast expanses of our Motherland. Its quality leaves much to be desired. It is rough, brittle and has an uneven edge. But it is the cheapest, which means it is ideal for those who are picking up beads for the first time. The second category is Czech beads. Its quality is much higher, and the price has not yet reached sky-high levels. Weaving poppy seeds from beads using the mosaic technique is best done with this particular material option. If you use beads of the first category, you are unlikely to be able to achieve the desired petal shape. But, despite all its advantages, Czech beads still have a certain percentage of defects. However, compared to the previous one, it is very small. And finally, the beads of the third category are Japanese. These are the highest quality and most durable beads in the whole world. It is also the most expensive, which certainly affects the cost of products made from it. Most often used to create costume jewelry. You will not find curved edges or rough surfaces in Japanese beads. Even the hole for the needle is quite large.

Master class of poppies made of beads (main flower)

To create a poppy we use red and black beads. We begin work by collecting five red and six black beads on a fairly long thread (1 meter). This will be the center of the petal. From there we weave in one direction and then in the other direction, reducing the number of black beads in vertical rows from the center to the edges. Although you can weave from the bottom up, as shown in the diagram.

The main poppy flower has five petals. They all have exactly the same shape and size. To make the edge of the petal look beautiful and have smooth curves, braid it with additional beads in a circle. To keep the thread looking neat and not unraveling, make a knot and then pull it through the next five or six beads. Now just trim off the excess.

Flower assembly

Beaded poppies, photos of which are presented in this article, consist primarily of two rows.

The bottom row is represented by three petals sewn together, and the top row consists of two petals that are connected in two places. When you have assembled both rows, insert them one into the other and connect the bottom edges, sewing them neatly at the bottoms.

How to make the center of a flower

The centers of poppies are made in various ways. Let's consider the simplest of them. Take a large green bead, pull a wire through it and twist the ends. Now take a very thin wire and cut as many lengths as the number of stamens you plan to place in your beaded poppy. Having placed a light yellow or light green bead on each piece, twist the free ends of the wire together. Gather the central bead and all the stamens around it into one “bouquet” and insert it into the center of the poppy.

Weaving buds

To imitate a half-opened poppy bud, you need to weave a petal and roll it into a tube, securing it with stitches. On the sides of such a bud there are small green leaves, which are made in parallel weaving on a wire. For one such leaf, take a piece of wire and first place one bead on it, move it to the center, collect two beads and pass through them with both edges of the wire. After this, put on three, four, six and four beads. Thread the wire through each row as described above. For a green bud that has not yet opened, you need to take three leaves. Each of them is woven in a parallel way. Rows are collected in the following sequence: three, four, five, six, seven, five, four, three and two beads. All these three leaves need to be sewn together to form a bud.

How to make leaves and flower stem

Poppy leaves can be woven in several ways. The simplest of them is parallel weaving on wire. They are created in the same way as small leaves for buds, but only larger. You can weave mosaic weaving from the middle of the leaf just like petals. Then you can make them more interesting by adding a jagged edge. The diagram shows another version of the sheet with a hole in the middle.

First, everything is done with mosaic weaving, and then the edges are connected to each other. If your flower should have a leg, you can make it from wire wrapped with green floss threads. When wrapping threads around the wire, at the end coat the edge of the thread with glue to secure it. To secure the buds to the stem, you first need to put a large bead on the piece of wire that is supposed to be the stem, place it in the middle, and wind the flower stem from the free edges. Then put a bud on the stem, which will be fixed thanks to the bead.

Application options

Poppy beads have a huge number of applications, primarily in creating various costume jewelry. You can decorate not only a necklace or bracelet with poppies, but even earrings and rings.

Poppies look very beautiful in a hairstyle. They wonderfully decorate all kinds of elastic bands, hairpins and headbands. You can also make a bouquet of poppies on stems and place them in a vase, or attach the flowers to a bag or clothing as a brooch.

We looked at how to weave a wonderful flower - a poppy - from beads. If you choose quality beads and follow the instructions carefully, you will be amazed at how realistic they look. With the help of such a flower you can easily decorate any outfit or accessory and enliven your image. You will also have a pleasant time creating it with your own hands.

Poppies can also be embroidered with beads. You can find different patterns for quick and easy weaving of bright poppies, materials and an embroidery master class. It is not necessary to follow exactly the pattern; you can get creative with bead embroidery.

Here are some patterns that are suitable for weaving poppies of different sizes from beads:

Petal weaving patterns.

The first version of weaving poppies from beads with patterns

In this master class on creating poppies we will need:

• Beads in green, black, red colors.
• Galvanized wire 60 numbers.
• Hard rod.
• Semi-rigid rod.
• Silk thread.
• Vinyl glue.
• Wire cutters.
• Round nose pliers.

We create four rounded petals on the main axis (1.5 cm) and make seven pairs of arcs around it using beads. We try to keep the petals in a round configuration as in the photo.

Then we make several leaves on the main axis (approximately two centimeters). We create four pairs of arcs near the other axis using beads. You need to create a jagged edge in the last row, like a real poppy.

Now let's create a bud. First, we create a petal by stringing it in arcs, bending it three times around the axis (two centimeters).

We make the middle of six loops with the same number of beads each. Let's combine them by rounding a strand of beads.

To create the stamens, we make large loops of 2.5 centimeters.

We collect poppies. We attach two leaves to a semi-rigid rod. We attach the bud to the second rod, immediately attach the core of six loops to the end of the wire with leaves, then the stamens. Then we wrap it with silk thread and attach four leaves. Stepping back 4 centimeters from the flower, attach the branch and wrap it until the stem is complete.

Our poppy is ready!

Master class on creating wildflowers with your own hands

Poppies are wildflowers in Central Asia. This type of poppy does not form a capsule, during their flowering the valley becomes bright red and in some places bright yellow, because poppies there are red, pink and yellow - this is an unforgettable sight. These poppies begin to bloom in May.

We will learn how to make a poppy from beads.

We will need red beads with different shades for each flower No. 10 (50 gr.), greenish-gray transparent beads No. 10 (40 gr.), faceted black beads No. 12 (2 gr.) and wire.

A poppy flower has 4 or 5 petals, 2 or 3 leaves, and 5 stamens. There are many shades of poppy in nature. This way we can create a flower of different shades: from red to yellow.

We begin to weave poppy petals in a circular weave of red beads on a sixty-meter wire. Let's take the following diagram:

• Five beads in nine rows.
• Let's create four or five rounded petals for each flower.
• To weave stamens, take a wire 45 centimeters long and put 12-15 faceted black beads on its center. We create a loop of beads and twist the ends of the wire twice. We make three more loops at each end. We should have 5 loops in total. We twist the ends of the wire under the stamens two or three times.
• On a wire 60-80 centimeters long we create a sheet with two pairs of teeth. We use the parallel weaving technique according to the guiding pattern:

• We create poppy leaves from gray-green beads. Each flower may have a different number of teeth. Each product should have several different leaves, since in nature there are no absolutely identical objects.
• We weave a poppy from the details. To do this, we place five petals evenly around the center of the stamens, twist the ends of the wire under the flower 5-6 centimeters. Then we add the first sheet and twist the wire two or three more times. Then we attach the next second sheet, twist the wire into the third sheet as well and twist it to the end. We create only two sheets for individual colors.
• We collect and weave the remaining poppies in the same way.

As a result, this is what we got:

We are exploring the third method of assembling bright flowers into a bouquet

Poppies are very beautiful, their fiery and bright flowers attract the eye. But the poppy cannot stand in a vase forever; the red petals will quickly wither and fall off. If you create a poppy from a material such as beads, then this beauty will be with you for a long time. Even not very experienced craftsmen can cope with this. You just need a little patience, as this work is labor-intensive and painstaking. You should end up with a stylish bouquet like this:

In this master class we will need:

Beads No. 10 of different colors (light green, black, green, red),

Wire of various thicknesses (1mm, 0.6mm, 0.3mm),

Thread or floral tape.

• Let's start working with the petals. We weave French weave with red beads, three arcs on each side and place two unfinished arcs a couple of beads below the previous one.

• We will weave only six petals for the first product.

• When the petals are created, we begin to weave the black stamens. Here we use the needle technique.

Each “needle” contains nine beads. There are nine of them to be made. Then we twist them.

• In order to create a poppy box, you need light green beads. It is created using the loop technique. We string thirteen beads onto a wire and twist them into a loop. Next, we make loops on the free ends of the wire. You need six loops per wire. Then close the box using black beads.

• Let's start weaving leaves. They need to be stitched so that they hold well and are strong. 0.1 wire is suitable for this. This wire will not be noticeable and the leaf will look elegant. You decide how many leaves you need.

• We have the petals, stamens, poppy box, and leaves ready. Now let's collect everything to create our flower.

Let's connect all parts of the product with strong fishing line.

Our flower is ready! If you have time and desire, you can make a bouquet of such poppies.

An interesting tutorial on how to create a purple poppy from beads

This product can be made on a thread and a needle, rather than on a fishing line. It's much easier than using fishing line. For this you need a special beading needle. The beads fit well and the product turns out more elegant, you can change the shape of the product in the required place, or increase it. We will need:

• purple beads No. 10;
• soft yellow beads No. 10;
• light green beads No. 5 3 pieces;
• bead needle and thread;
• copper wire 0.2 mm;
• copper wire 0.8 mm;
• green wire 0.4 mm;
• soft green floss thread;
• PVA glue.

This product used a mosaic weaving technique. You need to take a thread one meter long. We start weaving with six yellow beads and five purple ones. We start work from the middle, after finishing one side, we begin the second. In this case, ordinary Chinese beads are used.

The main flower should consist of 5 petals, absolutely identical in size. Along the edge, each of the petals is intertwined with beads so that the edge is smooth. First you need to make a knot, and then go through five beads and cut the thread.

We will sew two at once, and then the remaining three petals after we have created the petals. Let's assemble the product and insert both parts into each other. Carefully sew them together by the bottoms.

Everything is easier with buds! The half-opened bud contains the usual petals that you previously wove, rolled into a pipe and sewn with threads so that they are not visible. To create a bud, we need to make small leaves using green wire and beads. You need to pick up one bead, move it to the middle of the wire, pick up two beads and cross them with both ends. Then we collect 3, 4, 6, 4 beads and cross the wire after each set of beads. The sheet is ready. Now let's create the second one.

The green bud contains three leaves, which we weave in parallel, collecting beads in the following order: 3, 4, 5, 6, 7, 5, 4, 3, 2. Then mix them, creating a bud.

Wire leg

Let's cut 35 centimeters 0.8 mm. We string a large number five bead onto it, move it to the center of the wire, and tie both ends of the wire. We need three of these legs. Then we put two buds and a flower on it.

Green leaf and stamens

It is necessary to dramatically change the number of beads so that the leaf has teeth. You can dial in the following order: 1, 2, 3, 4, 6, 7, 6, 5, 7, 5, 3, 1.

Let's insert the legs into both buds. A large bead should secure them. We fix the green leaves in the required places and begin to wrap the legs with floss threads.

Now we need to create the center of the main flower. This can be done using yellow bead stamens and a fairly thin 0.2 mm wire. Put one bead on and twist the wire. Repeat these steps until you have the required number of stamens approximately three centimeters long. Take the stem and attach all the stamens with a large light green bead.

Place the prepared stem along with the stamens in the prepared flower. In order for it to hold tighter, it can be supported with small greenish leaves, made in the following order: 1, 2, 3, 4, 5, 6, 8, 6, 5, 3, 2. We attach both of these leaves to the leg and wrap it with green floss threads. Fix with PVA glue. The lower leaves of our poppy were created as follows: 1, 2, 3, 4, 6, 8, 6, 4, 6, 8, 6, 4, 3, 2 - with both cloves on the edges. And again we wrap these leaves to the legs and wrap them with floss threads.

We have made three flowers. Let's collect them in a bouquet and make a composition. It is good to take an example from real poppies, wrapping the buds in the way that is typical for them. In this case, beaded flowers look more real.

I wish you good luck in your creativity!

Detailed video for beginners

Many people associate a bouquet of poppies with summer and sunshine. And it is not at all necessary that this bouquet be real. You can make poppies from beads, and they will look very similar to real flowers. The bouquet can be placed at home as a decorative element or given to someone for a holiday.

Although it is quite easy to weave a poppy from beads, it is better for beginners to choose an easier master class. For weaving you need to prepare the following materials:

• beads in three colors (red, black, green);
• wire for weaving (diameter 0.3 mm);
• thick wire for the frame;
• green threads, PVA glue.

You need to take beads No. 10 and 12. At the same time, it can be Chinese - not very even. This will not be suitable, for example, for mosaic techniques or embroidery, but in such colors this flaw will be almost invisible.

A poppy bud consists of a poppy box of 4 petals and stamens. Naturally, red beads are best suited for the petals, but options are also possible. Threads are required to wrap the flower stem.

Weaving petals

They usually start by weaving poppy petals from beads; the pattern is suitable even for beginners who have just decided to learn beadwork. Proceed as follows:

The twisted wire is passed between the loops located in the middle. Lightly press the petal inward to get the desired shape, and turn the edges slightly inside out. One flower requires four identical petals.

Creation of stamens

You will need two types of stamens. There is nothing complicated here either:

All that remains is to take the end of the wire and push it down through the middle of the product. It turned out to be a nice poppy box.

The second type of stamens is woven from black beads. Needle weaving is already used here. Take a wire 110 cm long and collect 14 beads. Place them near the edge, pass one end of the wire through 13 beads (reverse direction). You will get a needle. As a result, 18 needles are woven.

Poppy leaf

Weaving leaves is also very easy. To do this, take a wire about 80 cm long. The step-by-step creation looks like this:

The number of sheets depends on the idea of ​​the needlewoman. You can get by with one for one flower or make three of them to make the bouquet more colorful and bright. You can randomly combine green and yellow beads in the leaves.

Flower assembly process

When all the components of the flower are ready, the most interesting thing remains - putting them together. It's very simple, and even a beginner in beading can do it. Step by step process:

1. To create a rod, take a thick wire and wrap the previously created poppy box around it.
2. Below, the stamens are wound in a circle.
3. Then they begin to wind 2 petals, followed by the remaining 2. Screw the elements crosswise.
4. Threads are wrapped around the wire stem, then they begin to wrap a leaf or leaves if more than one has been created.

After this, the process of building the Mac is considered complete. If more poppies are created for the bouquet, then they are collected in the same way and then placed in a beautiful vase.

Mosaic weaving

Beadwork is distinguished by its versatility; even ordinary poppies can be created using different techniques. You can create rope-like stems, embroider poppies on a black background, or use mosaic techniques. Mosaic weaving is somewhat more complicated and it is better to master it first on simpler products.

To create a poppy you will need beads of three colors. They choose any, but they always choose black for the stamens and the middle. A poppy petal is woven like a leaf from 2 parts - first one half, then the second. Start with the following steps:

The second half of the leaf is woven in the same way. Then you need to create a third petal and sew them all together, using the outermost three beads on each petal. The stamens are made in random order by sewing long black threads into the middle of the flower. The stem is created in the same way as in the case of the first option. Then you can stop at one flower or create a whole bouquet.

Weaving beaded poppies is interesting and exciting. The process is equally exciting for adults and children. Based on these instructions, you can weave other flowers by changing the size of the petals and choosing beads of other colors. Here a person is limited only by his imagination. Having mastered simple techniques, you can turn beading into an exciting hobby.

Poppies are incredibly bright and beautiful flowers. It is impossible to see them and remain indifferent. Fiery flowers are eye-catching, but a bouquet of poppies cannot last in your home forever. The scarlet petals will fall, the leaves will wither. But if you weave this flower from beads, then this incredible beauty will remain with you forever. We offer you a master class; photographs with step-by-step instructions can be found below in the article.

Bead poppies: step by step tutorial

Today we will tell and show you how to weave a poppy from beads: the master class is quite detailed and even not the most experienced craftswomen will be able to cope with the work. You just need to be patient, because the work is painstaking and very time-consuming, as a result you can make an amazing bouquet of poppies, as in the photo:

We will need the following materials:

• Beads No. 10 (red, green, black, light green);
• Wire of different thicknesses: 0.3mm, 0.6mm, 1mm;
• Floral ribbon or thread (green).

Instructions for weaving poppies:

1) We will start the work with the petals of the flower. We use French weaving with red beads, three arcs on each side and two unfinished arcs (they need to be placed a couple of beads below the previous one).

We need to weave only 6 petals for the 1st flower.

2) After the petals are woven, we weave the black stamens. The needle technique is used to weave them.

Each “needle” should consist of 9 beads, and 9 such “needles” are needed. After which they need to be twisted.

3) What is a poppy without a poppy box? To weave such a box, we need light green beads. It is woven using a loop technique. We string 13 beads onto the wire and twist them into a loop, then weave loops on the free ends of the wire. Only 6 loops per 1 box. Then this box needs to be closed using black beads (see photo).

4) Next we weave the leaves. In order for them to be strong and hold well, they need to be stitched. It is best to do this with 0.1 wire (it will not be visible and the leaf will look more elegant. The number of leaves is at your discretion.

5) So, we have woven the flower petals, stamens, poppy box and leaves - now we need to put it all together to make our poppy flower.

Using a thick fishing line, you need to combine all the parts of the needlework one by one.

Our poppy is ready! If you have the desire and time, you can weave a whole bouquet, because now you know how to make poppy seeds and beads. We also invite you to watch a video with a master class on weaving these beautiful flowers.

Beaded jewelry with poppies

Poppies look great as jewelry motifs.

For example, this bright bracelet:

Or this incredibly stylish harness:

To weave a strand of Poppy beads, we will need:

• Beads No. 10 (white, red, black, yellow);
• White bobbin thread No. 10;
• Hook 0.7 or 1;
• Beading needle;
• Accessories for jewelry.

You need to weave a tourniquet according to this pattern:

The main thing is not to get lost when threading the beads, otherwise the design will not work. After all the beads are put on, the length of the thread will be about 5 meters.

And then the knitting of the tourniquet begins:

It is necessary to leave a free tip of about 30 cm; the lock will be attached to it. Then, 15 air loops are crocheted, which need to be wrapped in a ring using a post. All the following rows are knitted with beads in a single crochet stitch. It is a loop - one bead.

And so on until the very end of the tourniquet.

After which we need to leave about 30 cm of free thread. Now we attach the clasps.

The tourniquet is ready!

Embroidering poppies with beads

Poppies can not only be woven from beads, they can, of course, also be embroidered with beads. Now you can find almost any pattern, and manufacturers, knowing about the love of needlewomen for these real hot colors, are saturating the market with a variety of materials.

In order for you to get bead embroidery: Maki MK is not required. You just need to follow the diagram, and you will be able to “draw” real masterpieces with beads:

Or, for example, this incredibly beautiful triptych “Poppies”:

Happy beading!

Video on the topic of the article