print Thanks, great tutorial +0
Making a lily out of crepe paper is not so easy! But if you have this lesson and the necessary materials, then you are guaranteed success and you will get a beautiful flower.
- Corrugated paper in white, olive and pink tones
- Floral wire or long skewer
- hot glue gun
- Tape tape
- Ruler
- Scissors
- White thread
- Pencil
Step by step photo lesson:
On white corrugated paper, draw six identical petals.
Cut out.
We bend the middle with our fingers so that the petals become more voluminous.
Cut out a small rectangle from olive-colored corrugated paper.
Cut out triangles at the top and twist.
Then we will prepare the leaves. Cut out in the form of rectangles.
Then fold each rectangle in half and cut out the shape.
We open and get leaves.
Now we will make the core of the flower from pink paper. Cut out the rectangle.
Pull it out to the sides and bend it in half several times. We apply glue and attach the wire.
We begin to fold the paper and fix it with hot glue.
We fix in the middle with a white thread.
We begin to glue the first layer of petals.
Now glue the second layer of petals, which also consists of three pieces.
Glue the green leaves at the base of the flower with hot glue. Next, we will walk from the base of the flower along its entire surface with a green teip tape.
Let's add leaves to the stem. We fix them with tape.
We bend beautifully the petals of the flower.
Now we can add pink tones to our petals. Corrugated paper lily is ready.
Video lesson
The popularity of origami these days is growing more and more. This trend came to us from Japan. The simple folding of paper has become an art. One of my favorite pastimes was making paper flowers. An attractive option for many lovers of this business has become a water lily.
Lily can be snow-white, bright red, pink or yellow. She is the personification of nobility and spiritual purity. This flower is beautiful and whimsical. It is easy to reproduce on paper.
To create a figure you will need:
- Scissors.
- Glue.
- Paper.
- Pencil.
And now we will learn how to make an origami lily step by step. Place the piece of paper you will be using in front of you. Choose the color you like best. The paper must be A4.
It must be rolled up, as shown in the diagram. You should get a square. Cut off excess pieces and discard.
The square must be folded, as shown in the figure. We fold the lower edges towards the middle, and then unbend. We bend the upper corner down, unbend. You should see lines that will help you assemble the flower later.
The next step is to collect the petals. Take the bottom corner and fold it up. In the same way, it is necessary to fold the other corners of the figure. You may notice that your model has become smaller.
It's good if you have a simple pencil next to you. Take care of its availability in advance, it will greatly simplify your work. Straighten each petal with a pencil. Work with care so as not to tear or damage anything.
Look what you got! Now we string this bud on the stem. To make it, roll the paper tightly. According to this scheme, you can not be limited to one flower. Feel free to experiment with sizes, colors, types of paper.
If you are a beginner, remember: everything does not come at once. Over time, you will be able to create a whole bouquet of beautiful paper lilies.
Corrugated paper lily
And this master class will teach you how to create voluminous, unusual, delicate paper lilies that repeat the shape of a living plant one to one.
So, we begin a master class that will teach you how to make lilies from corrugated paper.
Before starting work, always check the availability of the necessary materials according to the list. This will make it easier to work in the future. After all, origami - it should be not only beautiful, but also neat.
For this you will need:
Take the lettuce-colored corrugated paper and cut it into pieces. One strip should be about 2 cm wide.
Measure a centimeter long end from it to make a loop. Take a lettuce paper strip and cut off a half-centimeter piece. Glue the cut off part obliquely to the “loop” part. Glue the lettuce strip to its base. This is the pestle detail.
Stamens are also made of wire. This requires several segments, for example, five pieces. They are also pasted over with lettuce stripes.
Now on each stamen it is necessary to bend the corners. Then grease these edges with glue and sprinkle with orange semolina. The stamens are ready. Their lower edges must be attached to the bottom of the pestle. It should turn out so that the upper edges stick out in different directions.
The place of attachment should be wrapped with lurex thread, and the edges should be tied up. We glue a lettuce strip on the thread and get the finished middle.
Now for work we take white corrugated paper. From it we will make flower petals. Each should be about 8.5 cm long and 3.5 cm wide. Next, you need to cut paper strips across the sheet, apply an oily pink pastel to each petal, paint in the middle with lettuce pastel.
Now from corrugated paper you need to cut strips up to 2 cm in width. Cut off strips of white and light green colors must be pasted over six pieces of wire. If one piece is 20 cm long, then 7 of them should be on white paper, and 13 on green. They are needed for the stem of the lily.
We attach three petals to the leg and the middle. Next, we wrap the thread around the place where the parts are attached. It turned out the first row of petals. So it is necessary to do with each row and attach the petals in a checkerboard pattern.
The petals must be turned inside out and painted pink. Draw dots with black paint.
Now let's make the petioles of lily leaves. To do this, cut strips along the green sheet. Their length should be about 8 cm, and the width should be up to 1.5 cm. We glue the wire with these strips and attach it to the stem.
One of the original and interesting origami is a diagram that shows how to make crepe paper lilies with candy. To do this, sweets must be placed inside the bud or strung on a toothpick or match, as shown in the figure.
Step by step creation of a lily from corrugated paper
Making a paper napkin shape
With do-it-yourself corrugated paper lilies, we figured it out. Now we suggest that you familiarize yourself with another type of folding paper lilies using napkins.
The resulting lilies can be used not only for collection or home decoration, but also for serving a festive table. So, to create a do-it-yourself lily from paper napkins, we need:
- White napkins - 40 pieces.
- Paperclips.
- Green napkins - 8 pieces.
First we need one green napkin. It needs to be folded in half. Fold the edges inward on all sides. Then bend again. Unfold the napkin and fold the two edges to the fold.
The same steps must be done with other napkins. The resulting figures are connected and fastened with a paper clip. Now we are working with a white napkin. We fold one edge with the other and bend to the middle. It is necessary to turn the figure over and bend the ends to the middle. Then fold into 2 pieces. The result should be a petal.
The same action must be done with green napkins. We take the first model, the green figure and insert it into the blank. Then we do the same with the white figure.
If everything is done correctly, then the result will please you. A lily made of paper with your own hands can be put in a prominent place in the house or presented to a loved one.
Attention, only TODAY!
If you want to present an unusual gift to your loved ones or just decorate the interior of the room, then we suggest making lilies from corrugated paper. After reviewing the selection of master classes, you can make very beautiful compositions by combining different colors. Such lilies will retain their beautiful appearance much longer than real flowers.
Lilies with a surprise
In order to make such an unusual flower, we need sweets, corrugated paper, skewers, floral tape and glue.
Carefully, without piercing, we fix all the sweets on skewers.
Then cut out strips 3.5 cm wide, 9 cm long.
From the stripes we cut out the petals in the shape of a boat.
For one flower you will need six blanks. You can make petals of different lengths.
Then we wind the petal onto the pencil, gently bending it outward.
In the shape of a boat, stretch the edges of the petal.
Glue the petals to the skewer with candy.
We wrap the stalk with floristic or teip tape.
If you want to create a tiger lily, then you need to put dots with paint.
Here is such a cute lily, made do it yourself , ready. Having built a lot of these flowers, you can arrange a bouquet that will serve as a wonderful gift.
Alternative option
Do you want to learn how to quickly make a lily out of corrugated paper with your own hands? Then this master class is for you. The process of step-by-step production of several flowers takes no more than five minutes. So, for work we need: thick paper or a template for cardboard, corrugated paper, a pencil, wire for stamens, glue, scissors, felt-tip pens and pencils.
We would like to note that you can choose the number of stamens, the size and color of the flower according to your taste, the lily can be five-pointed or six-pointed. To begin with, we cut out a boat-shaped petal template from thick paper or cardboard. You can draw it by hand or print it out already.
Then we apply the template to the corrugated paper and cut out the required number of petals from it. We bend the petals slightly in the middle, then you can crush, but very easily, and unfold the workpiece. To shape the petal, you need to stretch it a little. To do this, in the middle, also very carefully, pull the petal in each direction. We color the petals with felt-tip pens or pencils as desired.
Next, you need to make stamens. We wrap the wire with white corrugated paper, lubricating with glue. We are waiting for it to dry. Cut it into small pieces of the required length. We string a bead on the wire and twist it. We wrap the bead with corrugated paper with glue. Then this edge needs to be painted brown, and the stalk itself - green. Glue the petals asymmetrically around the stamens.
Note! You can make a different assembly of the flower. To do this, you need to make small cones. Now take one, cut off the bottom and insert three symmetrically placed petals on the glue. Then insert another cone with three petals, and stick the stamens at the end.
Hello dear readers. Today I suggest you create a lily from corrugated paper. This is a very beautiful flower that can be used in compositions. It harmoniously looks in bouquets with other flowers. The color scheme will allow you to experiment an infinite number of times. I will tell you and show you how to make a lily from corrugated paper with step by step photos, and in the future, you yourself will be able to experiment and add new details, getting an increasingly believable flower. I really like to experiment with corrugated paper and make different flowers out of it.
The lily flower is beautiful and delicate. In one word - wonderful!
Corrugated paper lily - master class with photos
What will be required:
- Corrugated paper (I have white, light green and pink)
- Wire (diameter 0.4 mm)
- glue gun
- Scissors, ruler
- Floral green tape (teip tape)
A lily can be made from different flowers, as well as stamens for a lily.
Step by step process of creating a flower:
Step 1. The first step I make the stamens for the lily, I use pink crepe paper for this. I cut strips of paper 1 cm by 3 cm.
For the stem of the stamen, I cut off pieces of wire 8 cm. Wire diameter 0.4 mm,
To wrap the stamen I use strips of light green paper 0.5 cm by 3 cm.
I stretch the paper with my hands.
Step 2 Turn on hot glue. I glue the edge of the pink strip to the wire.
I start to wind the paper in a spiral, I lower the paper down. Get a stamen. I glue the edge of the paper to the wire.
Step 3 I glue a strip of light green color to the edge of the stamen, wind it around the wire going down. I fix it with hot glue.
I do this for all 5 stamens.
Step 4 For petals, I cut off strips of white corrugated paper 9.5 cm by 3 cm with scissors. I will need 6 of them.
I cut each strip diagonally, and I get 2 triangles.
Step 5 For the lily petal, I cut 6 pieces of wire, each 15 cm long. Now I need to glue these two triangles to the wire.
I stick it like in the photo. I can’t describe everything ... I apply a strip of glue, glue the wire, right away, just like in the photo, I place the second triangle and press it with my fingers so that everything sticks well.
At the bottom of the lily petal, a sharp edge is obtained. From above I round the edges giving the shape of a petal.
We need to bend, a little, the wire with the lily petal. This is how I do all the petals. Here's what I get.
You can stretch the edge of the petal quite a bit, make it more wavy, but this is not necessary.
Step 6 After we have made all the petals and stamens, we can collect the flower. I put all the stamens together, wrap the teip with tape.
I apply 3 leaves, one at a time to the stamens and wrap them with floral green ribbon. You can make a leg, I took a green wire.
In empty places, I apply 3 more petals and wrap tightly with teip tape. As a result, it turns out such a lily made of corrugated paper.
You can make three such flowers, you can 5. As many flowers as you like. For example, to congratulate relatives on their birthday, or to present to a teacher, educator. Children are very fond of giving gifts to teachers and educators, and making pleasant surprises.
Or you can use such a lily for a composition when you make a bouquet of flowers. Naturally, corrugated paper flowers. The bouquet can be supplemented with different flowers, leaves, berries.
By the way, in the background I have corrugated paper berries. Do lilies, I hope you succeed. Let the master class on how to make a lily from corrugated paper with photos help you with this. It's easy and simple to create beauty with your own hands!
