is an application that allows you to increase the maximum volume of music and notifications for your Android device. The developer promises an increase of 15 to 30 percent, depending on the smartphone or tablet used, both for the built-in speaker and when using headphones.
The program works by fine-tuning the Android equalizer parameters. The volume of playback of system sounds (for example, calls), media files and notifications is configured separately.
The booster does not require root access and works even on older versions of Android.
The main settings are managed from the main screen of the program. The volume level is adjusted using three sliders, while each parameter also displays a numeric value. When you click on the "Boost" button, the system settings are optimized, after which the application can be minimized. There is an icon in the notification bar, which can be turned off if desired using the advanced options menu.
- a completely free application, when using which the user has to view a fairly large number of ads that are displayed in full screen.
Fortunately, the need to access the program interface is extremely rare. There are no in-app purchases.
It should be borne in mind that when choosing high gain values, the program sets the system volume levels to the maximum. For this reason, it is not recommended to make adjustments while listening to music with headphones.
In practice, the effect of the amplifier directly depends on the specific device. On some models of smartphones and tablets, the application does not have a noticeable effect on the volume level. In addition, some advanced users initially increase the value of this parameter using the engineering menu; in such cases, the program will be useless.
Constant offers to put the maximum rating on Google Play or download other developer's creations also do not contribute to creating a positive impression of the application.
A prerequisite for correct operation is the compatibility of the application and the device used. As a result, Android may prove to be a good choice for users who want to increase the volume level in one click.
Many owners of smartphones and tablets have a problem with sound, or rather its insufficient volume. Unfortunately, by software, it is very rarely possible to solve it. Therefore, you need to apply a method that is quite simple and budgetary in order to make a simple electronic device that will increase the power of your device. Then you can listen to your favorite music and watch videos at normal and even very strong volume.
This video tutorial will show the simplest sound amplifier that anyone can make, even a schoolboy who has never picked up a soldering iron. Its circuit, suitable for a mobile phone, consists of the simplest components. When the amplifier is ready, you can improve the sound quality by using . How to do it is shown in a separate video on the site.
In the same article, we will talk about an amplifier to which you can simply connect a speaker, or use the idea, as mentioned above.
Sound amplifier circuit on the lm386 chip
What do you need to build an amplifier?
First, we need a crown connector, a crown of 9 volts, one speaker, a power of 1 W and an impedance of 8 ohms. In addition, you also need one 3.5 mm mini-jack, one 10 ohm resistor, a switch, an LM386 chip and one 10 V and 220 MF capacitor. The diagram was drawn on a piece of paper.
Phone amplifier circuit As you can see, this chip contains four latches on each side, there are 8 latches in total. In order not to confuse and not turn the microcircuit upside down and solder it incorrectly, it has a semicircle-shaped notch. We need to put the chip so that this icon is on top and you can solder everything step by step.
You might notice that number 6 is the penultimate foot on the right, we will solder one wire to it. This wire must be tied to the switch, the second contact from the switch must be connected to the positive of the crown connector.
Next stage.
Contact number 5 is the last one on the right side. You need to solder a capacitor to it, which has two poles - plus and minus. How should we identify them? There is a zero with a black stripe - this is a minus, the other side is a plus. According to the diagram, we connect the plus with the last contact on the right.
Let's move forward. The minus from the capacitor must be soldered to the plus of the speaker. We are going to take a wire and lengthen the contact of the capacitor. Now solder the negative wire of the capacitor to the positive from the speaker. Next, we will attach the minus from the speaker to the 4th and 2nd microcircuit clamps. We will use a jumper between these legs of the microcircuit.
Now we need to connect the resistor. Solder the wire to its second leg. It is a plus from the mini-jack. If you disassemble it, you can see there are two contacts for the left and right channels. Connect them together and solder the red wire with which we extended the wire from the resistor. Minus, or, in other words, the mass from the mini-jack must be soldered to the minus of the speaker.
Finally, we just need to solder the negative of the crown connector to the negative of the speaker. We take the wire and solder to the minus of the speaker. That's all. It is very easy. You may have noticed that it took 5-10 minutes.
Now you can check the sound amplifier for mobile phones and smartphones.
28.11.2016 Frank 7 comments
You don't have to use external speakers to amplify the sound of your Android device to the maximum level.
You can absolutely free download the program working sound volume amplifier for your smartphone or tablet android.
The native app that controls the phone's volume also provides extra boost and you can get good sound quality with the built-in equalizer (you can download it if not).
There are only a few things here. Much, and perhaps “everything”, depends on your android device.
It goes without saying that a low-quality device, usually very cheap in nature, cannot reproduce high-quality loud sound.
To stop wasting time looking for engineering settings, through the complex menus of the phone, you can make the sound louder using the power amplifier programs that you can download right here, more precisely on this page a little lower.
You can download two amplifiers for android in Russian. Why two? Because I tested on a samsung galaxy android 6.0.1 and LG with android 5, and you may have an android tablet, for example, 2.2, 4.2, 4.2.2, 2.3 6 or another.
My sound from headphones and speakers has become louder by 23% even in the radio, not to mention MP3. I advise you to download and install both amplifiers and experiment - which one will be the best, and use it in the future.
On the play market, there is an equalizer for music, only it is in English, and I did not bother with it, but chose only by experiment the best amplifier in Russian, or rather two. Here they are below - you can immediately download.
Download the first sound amplifier for android in Russian
By installing this program the phone ring should be louder than ever before.
Developer:
unknown
operating system:
android
Interface:
Russian
Download the second sound amplifier for android in Russian
This sound amplifier is a simple and at the same time effective program for an android mobile phone.
After installation, you do not need to look for sound adjustment - everything happens with one click of a finger.
NOTE: both programs will not bring any harm to your devices, only in manufacturer-dependent ones the effect may be zero - there were no glitches on my devices. Good luck.
Developer:
unknown
operating system:
android
Interface:
Russian
7 thoughts about “Download free verified sound volume booster in Russian for Android”
How to download here? Fucking google ads open and more shit
To answer
Search words download
To answer
no benefit
To answer
Message
No difference, no benefit.
I have android 2.3.6
Equalizer is a program for Android that will help eliminate all sound distortions and give you the opportunity to get the purest timbre. And with the use of a special equalizer + amplifier bundle, music on Android generally rises to a qualitatively new level.
Depending on the original quality of the music track, the application selects the best correction method, and therefore even very quiet songs acquire volume and richness of sound.
With the help of the Equalizer + Amplifier software package, music packaged in traditional formats becomes little different from what is recorded in professional studios. If it were not so, this software would not be installed on 10 million Android devices already.
Features of Equalizer + Music Booster app
There are so many features that it is impossible to count them all, but the most significant include the following:
- 10 professional filters for various music genres;
- 5 band equalizer with a huge frequency range;
- accurate volume and bass power control;
- built-in music player;
- availability of functional tools for working with music albums and individual tracks;
- the presence of a built-in visualizer.
The only negative can be considered that full access to all functions and settings is provided only after purchasing a premium account and that technical support is not very good, or rather, does not speak Russian at all. However, the latter can not be considered a drawback, because if errors appear, they are very rare and they are eliminated at the speed of sound.
