Hello!
Today I have prepared for you a master class on how to crochet a rose.
For the rose, I chose pink and purple yarn Adelia “Valeri” (50% wool, 50% acrylic, 50g/146m) - I once knitted from it. We will also need green cotton threads for the leaves and stem, hooks No. 1.5 and 2.5, wire (thin and thicker), tape and scissors.
First we knit the petals of our rose according to pattern 1:
Using hook No. 2.5 we cast on 4 VPs, close them in a ring and knit 3 VP rises and 12 double crochets. At the end of the row, connect the column and again 3 VP lifting...
We take dark-colored yarn and knit 4 arches of 4 ch, attaching them with single crochets to every second stitch of the previous row.
We knit 7-8 such petals. I did not tie one of them with purple yarn (this will be the middle of the rose).
Using crochet hook No. 1.5, I cast on 8 VP (in the diagram - 10), closed it in a ring and knitted, starting each row with 3 VP rise:
1st row - 3 VP lifts and 9 double crochets (dc s/n),
2nd row - repeat * 2 treble s/n, 1 treble s/n *
3rd row - repeat * 2 treble s/n, 1 treble s/n, 2 treble s/n *
4th row - repeat * 2 treble s/n, 3 treble s/n, 2 treble s/n *.
The result is a “cup” like this:
1st row - 3 VP and 6 treble s/n, turn the work,
2nd row - 3 VP, 4 treble s/n, 2 treble s/n with a common top, turn the work,
3rd row - 3 VP, 4 treble s/n, turn the work,
4th row - 3 VP, 2 treble s/n, 2 treble s/n with a common top, turn the work,
5th row - 3 VP, 2 treble s/n, turn the work,
6th row - 3 VP and 2 treble s/n with a common top.
The diagram suggests knitting each leaf separately, cutting the thread each time. Because I don’t like to bother too much with tying knots and tucking in tails; I suggest knitting without tearing off the thread. To do this, having finished knitting a leaf, we “go down” in half-columns along its left edge, reach the cup and begin knitting the next leaf.
This way we get a star - a sepal of a knitted rose.
Now we knit the leaves according to pattern 3:
We start with 10 VP. Leave a tail of thread about 10 cm long.
Then 1 row - 1 VP rise, 2 treble crochets, 2 half crochet stitches. s/n, 2 treble s/n, 2 half treble s/n, 2 treble s/n, 3 VP and repeat the same on the other side of the piece of paper.
Tie a half stitch at the top of the leaf. s/n, double crochet, double crochet in the arch from 3 VPs of the previous row, 3 VPs, 1 more double crochet stitch in the same arch and then the other side of the leaf symmetrically to the first.
Now we pull the tail of the thread, which we left at the beginning, onto the front side at the top of the leaf,
and knit the following chain along the middle line:
Sew the sepals to the knitted rose:
Prepare a wire hook, tie a green thread to it and insert it into the middle of the rose.
Then we wrap the stem, as shown in the photo:
It turns out like this:
I first wrapped the junction of the branches with the stem with tape, and then wound the threads. I also carefully secured the ponytails at the bottom with tape.
Now you know how to crochet a rose.
How to crochet the edge of a product (master class)
Crochet "scales" pattern
This elegant cover for a toaster in the shape of a basket with roses is very easy to knit.
True, you will have to work hard on a lot of flowers and leaves. But in this job you will hone your skills.
Later you can knit the same heating pad for a teapot or a lid for a bread box.
You will need:
- brown yarn for the basket,
- green yarn for leaves
- red-pink-yellow yarn for roses.
Operating procedure:
1. First, measure the item for which you will knit this “clothes”.
2. We will knit the basket with a “checkerboard” pattern, where the alternation of flat and convex columns forms a texture reminiscent of basket weaving (see photo).
A “flat stitch” is a double crochet, the hook is threaded from right to left in front of the leg of the previous row.
A “convex post” is also a double crochet, but the hook is threaded from right to left behind the leg of the post of the previous row.
3. We knit roses from red, pink and yellow yarn in the pattern (see photo).
To do this, we cast on a chain in which the number of loops must be a multiple of 4 and for lifting, cast on 3 more loops.
We fold the connected “paths” into roses.
4. Using green yarn, we knit leaves according to the pattern (see photo).
5. We fix the finished flowers and leaves on the “basket”.
I suggest you make a rose like this.
The size of the rose will depend on the number of air loops. I cast on 60 stitches
it turns out to be a kind of spiral
after we have tied the edges, we collect the resulting spiral into a bud, sewing the lower edges
Now let's start creating the cup. we knit it according to the pattern.
I knitted it a little differently: I made the leaves long and short, alternating them.
If you don't knit the last row, the sheet will turn out smaller.
Large leaf on the left, smaller on the right
Now let's start creating the stem. I used a regular wooden stick, previously cleaned. The knots don’t need to be cut off, then the leaves can be sewn onto them.
In the same vein, we tightly wrap the stem with threads
After the stem is ready, we sew the cup, having first placed it on the stem, but not quite deeply. this way the bud will hold on better.
Now carefully sew the bud to the cup, then sew on the leaves
the rose is ready
This is the kind of bouquet you can give. and not expensive and forever, such roses will delight the eye for a long time.
Crochet rose.
The crochet pattern in this post is simply gorgeous. Such an unusual and beautiful composition will surely decorate any interior, and will also bring a bit of individuality to the owners.
Today we will try to knit such a luxurious bouquet of white roses. Just like in a fairy tale! The size of the flower is 7 cm, and the size of the buds is 2.5 cm.
To work, take creamy white yarn, a No. 1 hook, plastic stems and starch. Knit the flowers as shown in the detailed description: the pistil of the flower, the wreath of petals A B C and D, the bud and the pistil and wreath of petals.
Be sure to starch the flowers and turn them outside. Next, place the flowers and buds on the stems and secure them well with the stamens. That's it, ready!
We wish you success. Your efforts will definitely be crowned with success and such a bouquet will decorate your interior very beautifully.
We crochet a beautiful voluminous Rose
Good day. Today I want to show you step by step crochet roses in pictures. The volume of the rose depends on the number of loops cast on and, accordingly, the number of petals obtained, and the thickness of the yarn.
In my example, a rose is used as a decoration for a headband, also crocheted. But you can use it as a brooch, for decorating clothes, interiors, etc.
The whole process of crocheting a rose takes me about an hour (26 petals). But again, if the number of petals is less, then it will take a little time.
Step-by-step instructions for crocheting a rose
1. The rose will consist of 26 petals; for this we crochet a chain of 52 loops.
2. We knit the second row.
To do this, we knit 3 lifting loops, in the 4th loop - a double crochet, then a chain crochet, * a double crochet in the next loop, a chain crochet, a double crochet in the same loop, a chain loop.
Repeat until the end of the row from *.
Thus, we kind of get the letters V.
3. We knit 3 lifting loops.
Then - double crochet, 3 chain crochets, 2 double crochets in the same V arch. * In the next V arch - 2 double crochets, 3 chain crochets, 2 double crochets.
Repeat from * knit to the end of the row.
4. We finish crocheting our rose. To do this, 3 lifting loops, then into each double V arch we knit 10 double crochets, this way we get beautiful petals.
5. We twist the resulting ruffle as you like best and we get such a beautiful and voluminous rose. Personally, I plan to make such a rose as a brooch for a knitted black cardigan or vest.
As I already said, the more petals, the larger the volume of the flower itself.
I crocheted such a rose for a children's headband (for a 5-year-old girl). The bandage itself was made using a single crochet stitch. As you can see, everything is extremely simple.
I started knitting a rose with white thread and ended with red thread.
The back of the headband is shaped like a bow by evenly decreasing and adding stitches as you crochet.
This is the result you can get by spending a little time.
The pattern for the rosette was taken from a Chinese magazine. I only knitted the first two rows and then simply tied off the edge with contrasting yarn.
For a long time I had a stem from an artificial rose lying around, the flower from which disappeared into oblivion (somewhere in the wilds of Olesya’s next school project). I decided to knit a rose and use this stem for its intended purpose.
Process. And the most important knitter
The rosette was knitted in a strip, then twisted and secured with a needle and thread and a glue gun. I used this diagram as a basis.
The rose and receptacle are knitted from floss threads.
I continue to crochet flowers. I want to make a panel out of them someday.
Today I will show you a voluminous rose. It looks very beautiful and is easy to knit.
We cast on 76 air loops, then knit according to pattern 1.
Then we twist the finished ribbon, giving it the shape of a rose, fasten it with a thread and a needle for strength, and that’s it - the rose is ready.
Vase with roses. You will need: knitting threads (red, white, green), “Iris” threads, bobbin threads No. 30 white, embroidery ribbon, sequins, hook No. 2.5; 1.5, PVA glue, wire for rose and gypsophila stems.
Buds. Knit the petals from the center with double crochets according to the pattern with red (white, pink, yellow) thread. A total of 7-9 petals, depending on the density of the knitting and the desired size of the rose bud. You can knit a rose with different shades. Then collect the rose petals (sewn together with a needle), starting with the darker ones and ending with the light ones.
Sema knitting.
Legend:
○ — air loop
+ - single crochet
| - short column
†—single crochet
╪— double crochet
Leaf. Knit the leaves according to the pattern with green thread. The finished leaves can be unstarched or filled with strong-hold hairspray.
Cup. Tie five sepals with a green thread in single crochets according to the pattern: 3 ch; 1st row: 1 tbsp; 2-4th row: 2 tbsp.; 5-6th row: 3 tbsp.; 7th row: 4 tbsp; 8-9th row: 5 tbsp.; 10th row: 4 tbsp; 11th row: 3 tbsp; 12th row: 2 tbsp; 13th row: 1 tbsp. At the end of each row, knit 1-2 chain stitches.
Connect the sepals in the last row of st. single crochet, at the same time adding one air loop between them, close it in a circle and knit 2-3 rows in a circle with single crochet stitches.
Wrap the wire, pre-lubricated with glue, with green thread, while also wrapping rose leaves. Insert the stem into the sepal, securing it with PVA glue or a couple of hidden stitches in the color of the stem. Place the bud in the sepal with glue; you can also sew it on for strength. The rose is ready.
We collect a bouquet of roses. It can be decorated with a sprig of gypsophila and a lace package. To do this, knit any large napkin you like with a small hole for flowers from “Iris” threads, starch it and, having given it the desired shape, dry it until completely dry.
Gypsophila. Gypsophila can be made as follows. Tie 40-50 white flowers with thread No. 30 (40, 10). We cast on 5 chain loops and connect them in a circle, then go up * 5-6 ch, make a single crochet into a ring * and repeat this *action* 4 more times, break the thread. One gypsophila flower is ready. All that remains is to be patient and add 49 more. When all the flowers are ready, we collect them into a branch. To do this, take a thin wire and cut it 25-30 cm long. The number of wire pieces depends on the number of flowers. Then we stretch one end of the wire halfway through the center of the flower and twist the wire (something like beading). From ready-made branches (the length of the branches and the distances between them are arbitrary), assemble the required number of large branches, tightly twisting the ends of the wire together and placing the branches on a common trunk. I wrapped the stems and trunk with green spool threads. Gypsophila is a wonderful addition to bouquets of garden flowers. Several branches can advantageously emphasize the beauty of a single flower composition and give the necessary shape and volume to the bouquet. All that remains is to put the bouquet in the vase.
Any bouquet of flowers in your home will always give you a good and festive mood.
| Motif scheme | … |
a chain of the required number of chain loops (the longer the length of the chain, the more magnificent the rose) and starting from the 5th loop from the hook, knit according to the given pattern.
Calyx. Fold the green thread into a ring and knit from the resulting ring an air loop for lifting, 7 single crochets, a connecting stitch into the second loop for lifting. Tighten the end of the thread tightly and continue working according to the diagram above.
It is better to start learning to crochet with small items. Perfect for this knitted roses. Knitting patterns contain all the basic elements that you need to master. The big advantage is the small size: the needlewoman will immediately see the result and will not lose interest in the activity. Crocheting roses can be included in a knitting course for school-age children. In our article we will tell you how crochet a rose with diagrams and instructions.
This scheme is very simple. Even a novice needlewoman can knit such a flower. It can be used in a school technology curriculum at the very beginning of learning knitting. The result is very beautiful knitted flowers. They can decorate the hairpin or attach to gift. A several roses You can decorate a hoop or hair band.
Step-by-step description of the work:
At the end of knitting we get a lace strip that twists into a spiral. This is due to the fact that for each loop of the second row there are several columns of the third. The more stitches you knit, the more magnificent the flower will be.
Shape the knitted strip into a flower shape and secure with thread. The middle can be decorated with a bead, stamens or beads.
The lace pattern can be any. You can use the description of knitting an openwork napkin or finishing the edge of a garment.
Gallery: knitting roses (25 photos)
Master class crocheting roses with wide petals (video)
Based on the previous pattern, you can crochet a voluminous rose with wide petals. You just need to increase the number of rows.
Here is a step-by-step knitting pattern:
- Make a chain of 45 VPs. Next, knit according to the previous pattern, but do not finish knitting the third row. Knit arcs framing each petal. This will make it wider, and the rose itself will be more magnificent. Knit according to the pattern:
- Row 4. Knit rapport: 1 tbsp. b/n, 1 tbsp. s/n, two tbsp. with two yarn overs in one VP (repeat twice, total - 4 tbsp. s/n), then again 1 tbsp. s/n, 1 tbsp. b/n.
- Then roll the knitted ribbon into a roll and secure with thread. The voluminous crochet rose is ready.
A similar flower can be made based on any scheme. The main thing is the semicircular edges of the outermost row. This is due to the fact that the semicircles represent the petals of the finished flower. An example of a knitting pattern for a flower with wide petals:
With such a lush rose you can decorate the hat or make a whole bouquet from several roses.
You can also link the original rosette with petals of different widths and heights. The petals inside the bud will be smaller, and the flower will look more natural.
Then, as in the previous descriptions, roll the strip and shape it. Secure the flower with thread. The knitted rose is ready.
Crochet rosette with green leaves
When it becomes clear how to knit a rose, try to complicate the composition and add green leaves to it. You can knit each one separately, or you can include the five-leaf clover in the openwork strip pattern. The knitting pattern will be as follows:
Use a thread of the main color (red, pink or whatever you want to make a rose). Knit 28 petals using this pattern: in one arch of the second row 4 VP, 4 double crochets, 4 VP.
The flower preparation is ready. Now twist it into a spiral, shape it into a rose and secure with a needle and thread. This crochet rose will be an excellent decoration for a child’s Panama hat or hat.
Crochet rose: pattern with individual petals
You can also make a crochet rose from individual petals. You will have to tinker with it a little longer, but with some effort, any novice craftswoman can handle it. To do this, round blanks are made, which are then tied into one bud. Depending on their number and size, the knitted flower will turn out to be more or less lush, a blossoming rose or a closed bud.
Petal knitting order:
- Tie 4 VPs and close them into a ring, or make an amigurumi ring.
- Knit 13 stitches into a ring. s/n. Further knitting will proceed in a spiral.
- In every art. s/n of the previous row, knit 2 tbsp. b/n.
- In Art. s/n of the third row, connect the connection. art., tie 4 VP, conn. Art. in the next st. s/n 3rd row. These will be small loops framing the petal at the top. Repeat this 6 times. Then until the end of the circle in each st. s/n of the 3rd row, knit a connecting stitch. Knitting the petal is finished.
To make the finished flower look more natural, take threads of different shades. The petals should be tied together so that the darker color is inside the bud. The tone becomes lighter towards the edge. This way a knitted rose will look no worse than a real one.
To make a closed bud, make changes to the third row of knitting. The petal will become tighter and will involuntarily curl, creating the effect of an unopened bud. Instead of two double crochets, knit one connecting stitch or single crochet on half of the petal. When knitting this type of petals, it is important to start arches from VP 4 rows at the highest point, that is, above the st. s/n 3 rows.
After knitting the petals is completed, begin assembling. Start sewing the petals of the darkest shade, leaving the light ones for the edging. Try to give the rose a natural shape.
The peculiarity of a rose knitted according to this pattern is that the splendor of the flower will directly depend on the number of petals. From several flowers you can put together a whole bouquet that will be an excellent gift or decorate a room.
Now you see that there are many different rose knitting patterns. Almost all of them are suitable for beginner needlewomen, as they knit quickly and easily. We hope that a knitted rose, made with the help of our tips, will be a wonderful start to a great creative journey.
Crochet roses
Hello, residents of the Country of Mothers!
Today I want to show you beautiful voluminous crocheted roses. And perhaps someone will want to knit such roses, and I will tell you how to do it. I would like to immediately apologize for the quality of some photos (I took them late at night, after putting the children to bed)
I saw these roses and just fell in love. Schemes from some Chinese site.
So, you will need:
-yarn, I also have PELICAN (Vita Cotton). Composition: 100% double mercerized cotton. Thread length 330 m. Skein weight 50 g. and COCO (Vita Cotton). Composition:100% mercerized cotton. Thread length 240 m. Skein weight 50 g.
-hook, I have number 1.7
-wire- thinner so that it bends well, and thick for the stem, it should not bend under the weight of the rose.
- florenta Green colour
- glue, I used Moment, universal gel
- padding polyester, a small amount of
- beads or half beads, for dew drops
- a vessel where your rose will live, I have a small glass vase and decorative stones.
Girls, at the request of the copyright holder, I deleted the diagrams. I leave only my photographs of petals. If desired, the diagrams can be found in the public domain on the Internet. Many people copied this post into liveinternet diaries.
We knit three small petals. Make the initial circle of air loops as small as possible so that the hole is almost invisible. We hide the starting thread and leave a longer thread at the end so that later we have something to sew the rose together with.
We knit the next larger petals in the amount of three pieces, according to the same principle.
Then 4 slightly larger petals.
And the largest petals are 5 pieces.
Then we knit a bud and sew the petals to it. Here the initial ring of air loops should be larger so that there remains a hole where we will then insert the wire stem. The bud needs to be stuffed tightly with padding poly.
Now we will sew the petals onto the bud. Remember that the hole for the stem should be at the bottom. We will sew it in layers, according to the number of petals of different sizes - that is, there will be four layers. You need to sew them on like this. First we sew half of the petal, then half of the second petal, then sew the second half of the first petal onto the second petal. And so on all three petals in a circle. It should look like this.
We sew the remaining petals using the same principle. Just try it on first, make sure the petals fit nicely. In the end it should look like this.
Now the stems and leaves. Cut the thin wire into pieces: two smaller and one larger. We knit leaves of a suitable shape. There are many diagrams of different leaves on the Internet, choose what you like, I won’t focus on it here. You need two more and four smaller leaves. We wrap those two smaller pieces of wire with floral tape. Then we begin to wrap the larger one and in the process we wrap the small stems crosswise several times to the large one, as in the photo.
Then glue the leaves to the stems. We take a thick wire for the main stem and also wrap it with floral tape, in the process wrapping a branch with leaves, according to the same principle - crosswise. I knitted the sepal without a pattern, a circle in single crochets, up to 30 loops, then each leaf separately - 6 loops at the base, in every third row we decreased 1 loop. Be sure to leave a hole in the middle for the stem. Then we put the sepal on the stem, thickly coat the tip of the stem with glue and stick it into the rose, trying to push it further away. We move the sepal to the rose and glue it.
Knitting will allow you to create things of incredible beauty! You can create for yourself ever-blooming and unfading flowers that will decorate your home or clothes for a very long time. And our step-by-step master class for beginners will tell you all the intricacies of crocheting beautiful roses.
We analyze the patterns for knitting roses using a crochet hook
To create such a masterpiece with your own hands, it is advisable to have detailed diagrams before your eyes. The photo below shows all the patterns and descriptions necessary for knitting.
This pattern will make the work a little easier for people who already know how to knit and will not cause any particular difficulties when performing it, but beginners will have to work hard. However, our master class with a job description, which you will find below, can always come to their aid.
Training video lesson:
A simple master class for beginners
To ensure that your products turn out beautiful and natural, start working carefully, without being distracted by anything. This work is delicate and painstaking. If you put every effort into creating such a thing, the result will be worthwhile and of high quality.
You will need a hook and threads of any color - it's just a matter of your taste.
- To begin, knit a chain of twenty-six stitches; the first row should contain single crochets.
- After this, knit two air loops to create volume.
- When you start weaving the third row, knit five double crochets into the loop of the previous row, and do the same with the next loop. And with the subsequent ones too - knit the entire row like this.
- After completing this work, twist the knitted piece into a spiral using a needle and form a rosette.
- The rosebud is ready. Now you can start making leaves for it.
To do this, knit a chain of eight loops, knit the second row like this: two single crochets, three double crochets and two single crochets. Finish by knitting a picot. For an example of how to perform the described work, see the video.
Fillet technique for beginners with job description
Fillet knitting is a very simple technique. It consists in the fact that you need to fill in the squares located on a special grid, while creating a pattern on it. And to fill these squares, you need to be able to knit chain stitches and stitches of two types - double crochet and single crochet. The diagrams are shown in the photo below.
Volumetric technique for making a beautiful and lush flower
A handmade voluminous rose is not only a stunning decoration for the interior, but also a wonderful gift that is unlikely to leave anyone indifferent. After all, it was made with your own hands, with diligence and love. For successful work, use the diagram below.
Thus, after studying this step-by-step master class for beginners, you will be able to knit beautiful and bright roses. Good luck and inspiration to you.
