A computer game with angry birds as the main characters is no longer new, but it is gaining more and more popularity. The developers were right when they chose birds of various breeds as the prototype for virtual objects, and even made them living projectiles. All boys in real life love to shoot with slingshots. In the virtual world, they are also given such an opportunity, and what a great one - angry birds Angry Birds fly out of the slingshot, and their pig opponents must beware of them. Girls are also attracted to this game, because all the birds are depicted as bright and unusual. We suggest making Angry Birds from plasticine. The given step-by-step modeling lesson is relevant for children of primary school age and preschoolers who are interested in modeling, for teenagers who are interested in computer games.
Red is a red bird with a stern look. This is the most standard Angry Birds, familiar even to novice players. In the real world, we suggest creating a miniature of this bird from plasticine with your own hands. This modeling will not cause any difficulties, just study the step-by-step lesson on sculpting an angry bird given below.
To make Angry Birds from plasticine, take:
- red, black, white and yellow plasticine;
- spatula-knife.
Master class “Red Angry Birds from plasticine step by step”:
1) Stock up on the necessary plasticine for work. If you don’t have a whole red block in stock, then use a small amount, but disguise some damaged plasticine or round object inside. So, red is the main color, the spherical torso of the hero will be made from it, all the others will be used in much smaller proportions.
2) Roll into a ball the size of a walnut or larger. It all depends on your desire to create a craft of the desired size and on the amount of plasticine.
3) Pull out the ball on one side with your fingers. The result should be a figure shaped like a drop, but the upper sharp part should be moved to the side.
4) Cut the protruding part in the form of a tuft with a stack. Use your fingers to smooth out any ridges.
5) Put black glasses on the front side of the craft - the muzzle. You need to make them from a crescent-shaped flatbread. It is convenient to cut out such a part in a stack to get straight lines.
6) Stick on white dots - eyes. Press down the plasticine over them with a stack to show furrowed eyebrows. Two thin stripes are enough.
7) Stick even smaller black pupils onto the white dots. Be sure to move them towards each other to create a really angry bird look. You can add white tiny highlights to make the look lively.
8) Prepare a white cake of suitable size to decorate the abdomen.
9) Stick the cake on the bottom, but do not join it with the black glasses, leave a small gap.
10) In the gap between the white and black parts, stick a bird’s beak, making a miniature cone from yellow plasticine. When completing this detail, compare the size of the beak with the entire craft to guess its parameters.
print Thanks, great lesson +23
The sculpting of the Angry Birds game character Stella will appeal to girls, because it is for them that the new version was invented, where princesses and evil witches appear, and living projectiles are presented in pink.
Plasticine creativity captivates children no less than watching cartoons or computer games. There is no need to talk about the benefits of such activities, because the main argument in favor of plasticine is tactile sensations, which transmit additional information to the brain and allow you to develop spatial imagination. This modeling lesson describes in detail how to sculpt Angry Birds Stella from plasticine. So fans of computer games will like this work.
Other lessons on Angry Birds:Step by step photo lesson:
It is advisable to choose bright pink plasticine as the main color. The body of a romantic bird and small details will be made from it. All other shades will be used in negligible quantities.
Roll up a pink ball - the torso of a living virtual projectile.
Attach more delicate pink plasticine to your chest, turning a small piece into a cake. Place a neat yellow beak at the junction of the two colors.
Glue blue eyes just above the beak. First make white cakes, then add blue pupils.
Frame Stella's charming eyes with eyelashes and thin eyebrows. This will help you make black plasticine.
Make the bird's tail from black feathers, and to decorate the top of its head, prepare a pink crest with red tips.
Attach the last parts to the round body of the craft so that the angry bird takes on its appearance.
The plasticine stella is ready. Such a toy miniature, reminiscent of a real computer character, will help simulate the game in reality. All that remains is to create other representatives of the popular Android game. Watch other tutorials to make a whole regiment of angry birds.
Since we are creating a unique collection of Angry Birds figurines, we should not ignore the main enemy. As a matter of fact, because of the harmful pigs, players have to use the services of angry birds and fire virtual shells to protect the eggs. We also make a pig from plasticine. After all, it’s as easy as doing all the other crafts. We saw the drawn figure, maybe even painted it, drew it, and now we have to work with the soft mass.
What to consider when sculpting. Firstly, the unusual appearance of the pig. These are green figures, they are unusual for us, there is no hint of pink. And pigs are funny and round. Unlike the stern and always serious angry birds, pigs always smile. Secondly, we need to analyze exactly what parts we need in order to reproduce an exact copy, and what materials to prepare. Let's start the lesson and figure everything out in order. If you have these detailed instructions at hand, the work will be completed quickly and fruitfully.
What to prepare for sculpting a pig:
Plasticine in three colors: green, black and white;
- Tool for work.
How to make Angry Birds pig from plasticine
We need green color to create the body of a funny and unusual pig. In general, only a snout of a real pig will remain, which will also be green. Round pests squeal when angry birds overtake them, our figure will be silent, but we will defeat it quite successfully. As you can see, very few materials are required to complete the craft.
Let's start creating an exact copy of the pig. Roll out a green ball, as well as an additional oval patch and two small ears. Glue the base for the mouth onto the ball - this will be a black stripe. And also glue three white teeth. The slightly open mouth with three sparse teeth makes the pig look stupid. We marked the place on the ball where the muzzle will be, then we will attach all the other parts here.
Stick the nose clearly above the mouth, add black dots-nostrils. Glue white dots for eyes. They should be set far back and can be placed at nose level. The green ball-body itself is small, so all the parts should fit compactly. That's all that is required from a young sculptor.
Make pupils, stick small black dots under the eyes (on the cheeks) - a kind of freckles. Or pierce the plasticine in these places with a sharp needle.
Glue the ears to the top of the head and add thin eyebrows. Now the pig smiles at us and looks so harmless, although we know that we need to be on alert and protect our eggs from it. That's why we made the brave four before.
Stupid pig, the enemy of angry birds is ready. We made this copy from plasticine. And now we have our own small collection of players. Without thinking about the script, you can play an exciting game in reality. On one side of the arena we have red, yellow, blue and black birds - a wonderful team of birds, on the other - a stupid green pig. Do you have a slingshot to launch, think about how to make one.
Funny characters from the computer game “Angry Birds” quickly gained popularity. For fans of Angry Birds, it won’t be difficult to independently fashion figures from plasticine for your collection.
Preparation and necessary materials
To work you will need:- a set of colored plasticine;
- stack
- modeling board.
The basis for performing all Angry Birds is the ball.
Plasticine is a very malleable material, but in order for it to easily take the desired shape, you need to warm it up well and knead it in your hands. To avoid staining the surface of the table, you must use a modeling board.
An alternative to plasticine can be polymer clay, which is baked at the end of the process. Figures made from this material will last much longer.
Red Bird
The most recognizable character in the game is the red bird Red.
- Roll a ball out of red plasticine.
- Prepare a white ball, flatten it into a flat cake, pointed on one side.
- Place the cake on the ball. This is Red's breast.
- Make a cone-shaped beak from yellow plasticine.
- Attach the beak to the ball above the pointed part of the breast.
- Using a stack, split the beak so that the upper part is slightly longer than the lower part. For a more angry look, fold the top half down.
- Attach a red crest of two sausages to the back of the bird’s head.
- For the eyes, roll two white balls and flatten them a little. Attach them immediately above the beak close to each other. Sculpt pupils from black plasticine.
- Black, frowning eyebrows made from two flattened sausages will complement the image of the stern Red.
- At the back you need to attach a black tail of three plates.
Black bird Bomb
The explosive bird looks like a bomb - black with a burning fuse.
- Roll out the base of the craft - a ball of black plasticine.
- The eyes need to be made from three round cakes of different sizes and colors: gray - large, white - smaller and black - very small. Stick them on top of each other, offset to one side, and secure them to the bird’s head at a short distance from each other. Bomb's gaze should be directed at the beak.
- Make eyebrows from two brown sausages. Stick them above the eyes.
- Make a beak from yellow plasticine in the form of a cone.
- Place a gray round spot on Bomb's forehead.
- The crest is black with a yellow tip.
- Make the tail the same as for Red, only black.
Blue twins Jay, Jim and Jake
Three funny blue birds can be made using the same algorithm as Red and Bomb.
The only difference is the color of the plasticine and small details:
- the bodies and crests of the twins will be blue;
- tails - black;
- beaks are brown;
- eyes – white with black pupils;
- A distinctive feature is orange eyelids framing the eyes from below, above or on both sides.
By playing with the location of the eyes, the shape of the beak and eyelids, you can change the facial expressions and mood of the twins.
Terence - Big Brother
Terence looks like his brother Red, only much bigger and tougher.
You need to draw wrinkles on the forehead with a sharp stick, and glue dark red cakes of different sizes on the sides.
Yellow Canary Chuck
Of all the Angry Birds heroes, Chuck stands out due to his body shape. The basis for his figure will be a cone.
- Roll a ball from yellow plasticine.
- Create a flat side at the bottom by pressing the ball onto a hard surface.
- Sharpen the part opposite to the plane so as to form a cone.
- Make ball-shaped eyes from white plasticine. Place them at a short distance from each other.
- Place black pupils in the center of each eye.
- Roll the eyebrows into red or brown sausages. Stick them above the eyes so as to give a frowning expression to your facial expressions.
- Make the orange beak sharp and long.
- A tuft, similar to a mohawk, consisting of four feathers, can be cut out in a stack of black plasticine cake.
- Attach a tail made in the same way to the back.
According to the proposed schemes, it will not be difficult to invent and create new images of heroes from this series, for variety and replenishment of your collection.
Matilda
Female character Angry Birds. When sculpting this layer, you should take into account its features.
- The basis of the Matilda figurine is a white egg-shaped oval.
- The eyes are located far from each other.
- Eyelashes and rosy cheeks give the bird a flirty look.
- The crest and tail are black.
- The orange beak is shorter and more massive than that of other Angry Birds.
In addition to the Matilda figurine, you can make several eggs, since laying is her main ability.
Green Hal
Hal's prototype is an emerald toucan. The distinctive features of this angry bird are its green color and disproportionately large beak.
- Make the base - a green ball.
- Make a triangular-shaped breast from a white plasticine cake and stick it on the ball.
- Make the eyes white with black pupils. Place them not close to each other, but leaving room for a prominent beak.
- Make the eyebrows, like all Angry Birds, black and frowning.
- Make a massive cone-shaped, slightly flattened beak from orange plasticine. Make a cut along the entire length of the stack.
- Make a tuft and tail from black plasticine.
Bubbles
The smallest representative of Angry Birds.
- For the base, roll a ball from orange plasticine.
- Make a black chest and glue it onto the ball.
- For the eyes, make two black cakes, smaller white ones on them, and place the black pupils in the center.
- For furrowed eyebrows, roll two brown sausages, making them longer than other birds.
- Attach a sharp beak of two pointed yellow sausages to the center. Bend the ends slightly upward.
- Make the crest and tail black.
Coquette Stella
The friendliest character in Angry Birds. A pink bird with cute features.
- Roll a pink ball for the base of the figure.
- Attach lighter pink plasticine to the chest in the form of a triangular cake.
- Place a neat cone-shaped yellow beak over the breast. Use a stack to draw a slot between the upper and lower halves.
- Glue the eyes just above the beak. First make white cakes, then add blue pupils.
- Add eyelashes and thin arched eyebrows from black plasticine.
- Make the bird's tail from three black feathers, and the crest from pink feathers with red tips.
Angry Birds figurines are not distinguished by their intricate shapes. Each bird, although it has its own individuality, is sculpted according to a general algorithm. A child can easily cope with such work.
In this small master class we will look at how to make Angry Birds with your own hands and do it according to the easiest and most common scheme, with step-by-step photo instructions. The craft is, of course, for children, but there will be moments that may puzzle the child, where small details will have to be made. We will need four colors of plasticine: red, white, black and yellow. And also thirty minutes of free time to create this creation. Remember to use a plastic knife for convenience.
So, we have prepared all the necessary material and naturally we can start creating.
Let's start right away with the body. Roll a red ball; determine the size of the piece yourself.
Then, pull out one edge to create a hairstyle.
Let's make a cut, thereby marking two hairs on the head. The plasticine angry birds should look like the original ones from the game.
Now roll a white ball, half the size of the red one.
It needs to be flattened.
We connect the red body and white plasticine. So that half of the body is white.
Let's start making a mask for the bird. Create a semi-circle of black color.
Cut a small corner in the center, thereby creating a .
Our Angry Birds bird made of plasticine is ready, now you know how to make it yourself.
