Having problems in the operation of your communication device due to downloading some applications, or your Android started to "glitch" for no apparent reason? We recommend that you put your android into safe mode. In addition to the modes and, in devices based on Android, Google has laid down another mode - safe.
When you turn on safe mode on an android, the operating system of the device automatically disables all installed applications, so you get the opportunity to make sure that it is the applications that slow down the smartphone, or that frequent reboots and freezes occur due to the manufacturer's fault. In the second case, the service center will help you solve the problem.
How to enable safe mode on android - detailed instructions, option one
This guide is valid for most smartphones and tablets. If you own a Nexus smartphone or tablet, or put your device into Safe Mode, use the following method:
- Press and hold the "Turn off" button on the screen.
- Confirm the request to put the device into safe mode.
Putting Android into Safe Mode - detailed instructions, option two
In case the above method did not help you, we recommend you one more method:- Bring up the shutdown menu on the screen.
- Press and hold the "Restart" button on the device screen.
- Confirm the prompt that appears on the screen.
Safe Mode on Android
Devices that have rolled off the assembly line of Samsung can be put into safe mode in three ways.Method number 1
- Call up the menu for disconnecting the device.
- Press and hold the "Turn off" button on the screen for a few seconds.
- Confirm the transition request.
- Turn off the device.
- Switch on the device.
- Until the download itself, hold down and hold the "Volume Down" button.
- Turn off the device.
- Switch on the device.
- Press or hold the button "additional options and switching applications" immediately after the logo appears on the screen.
The Android operating system can be easily littered, causing constant freezes and other annoying glitches. Safe Mode can help you figure out the reason for their appearance. Its main feature is the impossibility of using the applications that you installed after purchasing the device. Only preinstalled and system programs can be run in safe mode. In this article, we will explain in detail how to start this mode, as well as how to exit Safe Mode.
Google does not insist that all manufacturers implement a specific way to launch Safe Mode in their smartphones and tablets. Therefore, it may differ from model to model. The most popular way is to do the following:
Step 1. Go to the shutdown menu by holding down the power button for a while.
Step 2. Hold your finger on the item " Disconnect power". A new menu will appear.
Step 3. Agree with the system by clicking the " OK". The device will reboot, after which you will enter Safe Mode. The fact that you managed to enter it is evidenced by the corresponding inscription in the lower left corner of the screen.
Programs and games that you installed yourself do not work in this mode. If your device works without any lags in safe mode, then the problems are caused by one of the installed applications, and not by the poor state of the operating system.
Ways to run Safe Mode on different smartphones
The main method works on devices from the Nexus series and some other smartphones that are not supplemented with one or another proprietary shell. It is also used on unofficial firmware - for example, in CyanogenMod. On other gadgets, in most cases, a special list of actions is used.
HTC with hardware keys. Turn off your smartphone. Then hold down the "Menu" key while pressing the power button for a couple of seconds to turn on the device.
Samsung Galaxy S3 and older (OS version - Android 2.3 and lower). Turn off your device. Then turn it on and wait for the moment when the manufacturer's logo appears on the screen. Hold down the "Menu" button, holding it until the very end of the loading of the operating system.
Modern Samsung smartphones (Android 4.0 and higher). Turn off the device. Turn on your smartphone while waiting for the white logo of the South Korean company to appear. At this point, hold down the volume down button. Keep it until the operating system boots successfully.
Motorola Droid RAZR and some other devices. Turn off your device. Then turn it on by pressing and holding the volume up and down buttons at a certain moment. Keep them in Safe Mode until the system boots.
In many cases, one of the above methods works on devices from other manufacturers that we have not mentioned. Try it, experiment!
Exiting Safe Mode
Some users are also interested in how to disable Safe Mode on Android. In fact, doing this is much easier than getting into Safe Mode. Turning off and on the device often helps. You can also open the notification panel - for sure there is a message in it with a proposal to remove Safe Mode.
Click on the message and a pop-up menu should appear. In it you need to click " OK", Agreeing to terminate the work in safe mode.
So the device will reboot, after which you will find yourself in a completely normal mode of operation of the operating system.
On some devices from Samsung it is not possible to remove safe mode in this way. On them, when the manufacturer's logo appears, it is required to clamp volume up button or the " Menu».
Instructions
Windows provides several options to boot into Safe mode: Network driver-loaded, command-line-enabled and simple, which loads only the most essential drivers and services. The mode is selected by pressing the function key F8 before starting a new boot of the system.
Regardless of which of the safe modes you booted the computer in, you must restart the computer to return to normal mode. If you, for example, uninstalled the old video card driver, booted in safe mode and installed a fresh version of the driver, the reboot will happen automatically. In cases where the operations are not automated, you must perform them yourself.
Click on the Start button or the Windows key. In the menu, select the "Shutdown" item. A new dialog box will open. Select the "Restart" option in it. Wait for the operating system to boot in normal mode... If, during boot, a list of boot options reappears on the screen, use the arrow buttons to select "Normal boot Windows" and press the Enter key. Remember that Num Lock must be turned off when doing this.
There are alternative ways to reboot. Press the Ctrl, Alt and Del keys on the keyboard. The Task Manager window opens. It can also be called by right-clicking on the taskbar and selecting the "Task Manager" item. In the top menu bar in the dispatcher window, find the "Shutdown" item and set the "Restart" command.
Pressing the Ctrl, Alt and Del key combination twice will also restart the computer. If you are unable to restart the operating system using the methods described above, press the Reset button on the computer. It is usually located under the Power button and is relatively small.
Under "safe regime»Understand this option of loading the Windows operating system, in which only the basic files, minimal OS services and basic drivers necessary for the computer to run are started.
Instructions
Disconnect all USB devices, floppy disks, CDs and DVDs and restart the system. Exit all programs and power off the computer. Turn on the computer again after waiting thirty seconds.
If your computer is running a single XP, Vista, or 7 operating system, press the F8 function key several times while turning on the computer. Wait for the Advanced Boot Options window to appear.
If there are multiple installed operating systems, wait for the OS selection menu to launch and select the required version using the arrow keys. Confirm your selection by pressing the function key Enter and immediately after that press the F8 key. Wait for the Advanced Boot Options window to appear.
Select Safe Mode using the arrow keys on your keyboard and confirm the selected action by pressing the Enter function key.
In some cases, it is possible to block the above download methods by virus programs. Use an alternative download method. To do this, in Windows XP, call the main system menu by clicking the "Start" button, and go to the "Run" dialog. Type msconfig in the "Open" line and confirm the launch of the utility by clicking the OK button.
Go to the BOOT.INI tab and apply the check box in the / SAFEBOOT line of the Boot Options section. Confirm the saving of the changes made by clicking the OK button and restart the system (for Windows XP).
In Windows version 7, open the main Start menu and type msconfig in the text box of the search bar. Confirm the selected action by pressing the softkey labeled Enter.
Go to the Boot tab and apply the check box in the Safe Mode row under Boot Options. Confirm saving the changes made by clicking OK, and restart the system (for Windows 7).
Related Videos
Sources:
- How to start Windows in Safe Mode in 2019
Carrying out antivirus scan, getting rid of some drivers and solving many other technical problems of computer maintenance will allow the implementation of a safe regime downloads. In safe mode, all additional functions are disabled, and only standard system services and a basic set of drivers are loaded, which helps to solve problems of a certain type.
You will need
- computer, keyboard
Instructions
Make sure all CDs, DVDs and USB drives have been removed and the data stored on them is not being used.
Open the Start menu and select Turn Off Computer. In the drop-down menu, click Restart. If the restart operation does not start for a long time, use the "Restart" button located on the system unit.
Press the F8 key, which is located on the top row of keyboard buttons. Some versions of Windows at this point themselves offer to press F8. It is also possible to configure system parameters to automatically suggest pressing the F8 key every time the operating system boots. Another option is to select the length of time to wait for a response.
Some versions of Windows at this stage may prompt you to specify the drive containing the OS. Press Enter to select and press F8 again.
Select one of the secure boot options in the window that opens. This window is, with the white letters listed on it, the options for booting Windows. When you select Safe Mode, only basic system services and a set of basic drivers will be loaded.
To add network services and drivers to the standard complex, select "Safe mode with loading network drivers."
If there is a need to disable the OS graphical interface, then select "Safe Mode with Command Line Support". It should be remembered that navigation in safe mode is possible only with the keyboard (arrow keys), because the mouse driver is not a basic one.
Please note that the lack of action on your part will automatically load the configuration that will be highlighted on the monitor screen.
Related Videos
note
If the system automatically boots in safe mode, this is an indicator of the impossibility of a normal boot. Recently installed programs or drivers may be the cause. In this case, you must use the system recovery scheme.
Helpful advice
In addition to the F8 key, you can also use the F5 key or press Shift and F8 at the same time.
To exit safe mode, use restarting your computer.
Sources:
- Kaspersky Lab technical support service in 2019
The problem when Windows does not boot on a laptop is familiar to many. Usually the problem is solved by reinstalling the problematic operating system. Although a more humane solution can be found in this situation. You can simply boot Windows and fix the problem. In addition, it will help to avoid loss of information.
You will need
- Windows laptop
Instructions
The second way to enter safe mode. Turn on your computer and press the F8 key continuously. Windows boot options will appear. Among them, choose "safe mode". In some laptop models, the F12 key may act as an alternative to F8.
Related Videos
note
Answer: Start your computer in safe mode To boot your computer in safe mode. 1. Click the Start button, and then click Shut Down. 2. Select the option to restart your computer and click OK. 3. Press F8 at the specified time
Helpful advice
This article discusses the Safe Mode boot options that are supported by Windows. Choosing one of these options loads a minimal set of drivers. This Windows boot mode is used to make changes to the registry, and to download or remove drivers. Additional Information. To boot the OS in Safe Mode, follow these steps. Restart your computer and press the F8 key.
Sources:
- how to boot your computer in safe mode
You will need
- - Internet browser;
- - Dr.Web CureIt program.
Instructions
There are several ways to deal with pop-ups caused by virus activity. First of all, try to solve the problem using the freeware-program Dr.Web CureIt. You can download it from the official website of the Dr.Web anti-virus software manufacturers.
After downloading and installing the application on your computer, launch it. An operating system scan for malware will start automatically. This is as it should be, because many viral banners try to prevent this type of application from launching. Also, keep in mind that you do not need to run CureIt in safe mode, but in normal Windows operating mode.
If no viruses were found, then you need to find a code to disable the annoying pop-up window. Go online or another computer. Enter http://support.kaspersky.com/viruses/deblocker or http://sms.kaspersky.com into the address bar of your browser.
Next, enter the phone or account number indicated in the banner text, and then click on the "Get code" button. You will be presented with several codes - try entering them one by one until you find the one you want. If the required code was not among those presented, try to find it by following the links http://www.esetnod32.ru/.support/winlock or http://www.drweb.com/unlocker/index.
If, despite all your efforts, you cannot remove the banner, try to find the virus files yourself. To do this, start the OS in safe mode - then the virus window search will not interfere. To do this, while restarting the PC, press F8. When Windows boots up, locate the system32 folder in the Windows directory on your system drive.
Find and then delete all files that have a dll extension and a name ending in lib, for example, partlib.dll, hostlib.dll, etc. After deleting all files that match the description, restart your computer and select the normal OS boot mode. After that, run a full scan of your computer for viruses.
Related Videos
Windows operating systems support several modes downloads, including "Safe Mode". When you activate it, most of the components are automatically disabled, which makes it possible to restore system activity during the occurrence of failures or malfunctions.
You will need
- Operating system Windows Vista.
Instructions
Safe mode is most often used when any malfunctions or malfunctions occur not only in the system itself, but also in individual devices. It happens that the system is just not having time to load the desktop. Remember to remove all media from external connectors before loading Safe Mode. sometimes this is the cause of the problems in the system.
Previously, you may have encountered other types of loading screen modes, if the computer was turned off incorrectly, namely: the current in the mains, accidentally pressed the shutdown button, or the cat ran (by pressing the Power hot key with his paw). In this case, select the "Load Last Known Good Configuration" item.
To enter Safe Mode, you must restart your computer and press F8 at boot time before the Windows logo with a crawling strip appears. In the menu that opens, select your operating system, if there are several of them, place the cursor on the "Safe Mode" line and press the Enter key.
When loading this mode, the operating system logo should appear on the screen in poor quality, because drivers for the video card are not loaded. After the system is loaded, a window will appear on the screen in which you must click the "Yes" button to continue working. After fixing the malfunctions, restart the computer in the standard way, through the "Start" menu.
To work with a local network, you must use the "Safe Mode with Loading Network Drivers" download. In this case, you can connect to computers on your network, transfer data, and use an Internet connection. To print, you will need to enter the administrator password, if one has been set.
Advanced PC users are aware of the mode. There is an analogue of this feature in Android, in particular, in Samsung devices. Due to inattention, the user can accidentally activate it, but he does not know how to turn it off. Today we will help you deal with this problem.
What is security mode and how to disable it on Samsung devices
The security mode exactly matches its counterpart on computers: with Safe Mode activated, only system applications and components are loaded. This option is designed to remove conflicting applications that interfere with the normal operation of the system. Actually, this mode is turned off like this.
The latest devices from the Korean corporation will automatically switch to normal mode after. Actually, you can not even restart the device, but simply turn it off, and, after 10-15 seconds, turn it back on. If the security mode remains after the reboot, read on.
Method 2: Manually Disable Safe Mode
Some specific variants of Samsung phones and tablets need to manually disable Safe Mode. This is done like this.
In the overwhelming majority of cases, such manipulations are sufficient. If you still see Safe Mode, read on.
Method 3: Disconnect battery and SIM card
Sometimes, due to software malfunctions, Safe Mode cannot be disabled by standard means. Experienced users have found a way to return the devices to full functionality, but it will only work on devices with a removable battery.
- Turn off your smartphone (tablet).
- Remove the cover and take out the battery and sim card. Leave the gadget alone for 2-5 minutes to drain the residual charge from the device components.
- Insert the SIM card and battery back, then turn on your device. Safe Mode should be disabled.
If the safe mode remains activated now, proceed further.
Method 4: Factory Reset
In critical cases, even tricky dances with a tambourine do not help. Then there is an extreme option -. Restoring factory settings (preferably by resetting through recovery) is guaranteed to disable the security mode on your Samsung.
The above methods will help you disable Safe Mode on your Samsung gadgets. If you have alternatives, share them in the comments.
Android is an open source system, which implies some freedom in upgrading devices based on this OS. So, users can install applications from unverified sources: from the Internet or from a computer. These files often contain viruses that can block the entire device.
To solve problems and clear the system, a Safe-mode is provided, when only the options pre-installed by the manufacturer work on the device. In especially neglected cases, the smartphone is loaded only in this way. What can I do to disable Safe Mode on my Android phone?
Reboot device
To exit Safe-Mode, it is often enough to restart the phone. Press and hold "Start", in the menu that appears, select "Restart". If it is not there, - "Disable" (then the gadget needs to be turned on - it will resume working in standard mode). Some devices have a "Restart" item in the top shortcut bar.
For some models, a simple restart is not enough. In smartphones and tablets "Samsung" 2014–2015. it is necessary to press the power supply and, not paying attention to the menu that appears, hold it until the restart starts (10-30 seconds).
Take out the battery
Disconnecting the battery is analogous to an emergency shutdown of a computer on Windows. Take the battery out of the device for a couple of minutes to unload the capacitors, put it back in and turn on the gadget.In some models with a non-removable battery, a forced reboot of the gadget leads to the removal of the SIM card (Sony, Samsung).
Restart your phone with a key combination
In some models, Safe-mode is activated not through the main menu, but using a key combination. It also turns off.In the reboot and change of modes, the simultaneous pressing of the "Start" buttons and:
Clear app data or cache
A non-working or slowing application installed from unknown sources often leads to the gadget self-loading in Safe-mode. If restarting doesn't change anything, try deleting the most recently added options or clearing the cache.In the menu, open the "Settings" section - the "Applications" subsection. Find the ones installed just before the crash. In the tab that opens, select "Clear cache". If this does not help, the "Delete" button will remove the option completely.
Clearing the device cache completely can also help. There are no standard programs for this, and additionally installed CCleaner App types are not available in Safe-mode. Therefore, it is necessary to act through Recovery - the "heart" of the operating system.
Switch off the device with the button or by disconnecting the battery. Click "Start" and "Turn Sound". Release the power when you see the manufacturer's logo or vibration.
Instead of "Volume up", there may be a different combination depending on the model (check with the manufacturer's manual or technical support):
In the list that opens, find the "Wipe cache partition" item. After that, the phone will reboot and turn on in standard mode.
Perform a full reset through recovery
A full device reset is a complete cleaning of the android device, when all user data and options installed after purchase are deleted. The smartphone returns to the state in which it was released from the manufacturer. This method is suitable if an unstable phone does not allow opening the menu or constantly boots into Safe-mode.Hard Reset formats including drives and SIM cards inserted into a smartphone or tablet. Therefore, before turning off safe mode on Android, the necessary data should be reset to a memory card, computer or cloud storage, contacts - to a SIM card or to a special file. Both must be removed. Purchased content and applications downloaded through the Play Market or branded stores of manufacturers can be restored later by logging into your account.
For complete formatting, you need to go to the "Settings" - "Backup and reset" section. Some models offer 2 types of reboot: with a complete cleaning of the phone and a gentle one. You need to choose based on the degree of infection of the smartphone.
To reset in another way, enter Recovery. Select the line "Wipe data / factory reset" with the sound rocker, confirm with the "Start" key.
The smartphone will go to Recovery again. The last step is to select and confirm the "Reboot system now" item. After getting rid of all data, including malicious software, the gadget will boot in its normal working state.
The described methods will work only if software glitches lead to the download error. Some users noted that when trying to clean the device, it restarted over and over again, returning to Safe-mode. If such problems arise, the best choice would be to contact a specialized service center.
