Rabbit fur always looks interesting - be it a fur coat or a hat. Most often you have to touch the hat with your hands when you put it on, straighten it and take it off. It is this part of the wardrobe that gets dirty quickly enough, and therefore the fur becomes less attractive.
At home, the fur is easy to clean, the main thing is to follow the technology and then the rabbit fur will shine with the same shine. The main rule is no brushes, because a rabbit is a delicate thing.
How is white fur cleaned?
Over time, white fur can not only get dirty from dirty hands, dust and other objects. He is able to turn yellow. And since the rabbit hat, which has become a yellow-dirty shade, no longer looks so attractive, you need to clean it at home.
This will require semolina or potato starch. Spread paper on the floor, place a hat in the center and pour a little starch into the fur. Rub it well with your hands over the entire hat, it is better to imitate a hand wash. Then gently shake the starch and knock out the hat on the street. Comb the hat with a fine comb.
Pour a glass of water into a bowl, add 20 ml of hydrogen peroxide and five drops of ammonia. Fold the bandage in several layers, wet in the prepared solution and apply to the fur. If there is a sprayer, it is better to pour this liquid into it and gently spray it over the fur.
How to clean dirty fur?
If spots from hands, greasy spots appear on the cap, then they are removed with gasoline. Refined gasoline is sold in specialty hardware stores. Usually these are the departments for lighter refills. Fold a clean piece of cloth or gauze in several layers, soak it in gasoline and wipe well all dirty places. You need to clean the rabbit in the direction of the pile. After cleaning the rabbit hat with gasoline, it must be well ventilated, since the smell is not very pleasant. If the hat was cleaned in the cold season, then it will ventilate quickly when worn, but if it happened in the summer season, then all things in the house can stink.
To add shine to your rabbit fur, you can take a clean cloth, soak it in vinegar and, without pressing, brush the fur in the direction of the pile. Then apply liquid glycerin to another fabric and do the same. After such cleaning, the fur will begin to cast a natural shine.
Wheat bran is filled with water for half an hour. Then put the pan on the fire. While stirring constantly, the bran should be warmed up, but not boiled. Fully unfold the rabbit hat and pour hot bran on it. It is good to roll on the fur and collect with a brush. This should be done carefully, without crushing the steamed bran. Shake the cap well after cleaning. This is an excellent method for cleaning a rabbit, but it is not as popular as with semolina and starch, it cleans much better. The only rule of this difficult technology is that the bran should not boil and become soft, otherwise they will stick to the fur and then the hat can only be thrown away.
Rabbit fur is very popular; hats, fur coats, collars are made of it. Over time, the product wears out, overwrites, as a result of which there is a need for cleaning. It is important to understand that rabbit fur is a soft and delicate material that cannot withstand heat treatment. Folk remedies developed for cleaning products of this kind will help to return the former shine and beauty.
Effective ways to clean rabbit fur
Before you start cleaning the product with folk remedies, conduct a preliminary test on an inconspicuous area. Apply the cleaning agent, wait a quarter of an hour, remove it and evaluate the result. If the fur coat has not faded, feel free to proceed with the procedure.
Hydrogen peroxide
Semolina
For the procedure, you will need a vacuum cleaner (a compact car is suitable), a basin, semolina or potato starch (about 1.8 kg.). If your fur coat is very dirty, peel off the fur from the lining in advance, wash 2 parts separately. Pour 10 liters of warm water into a container, add semolina or potato starch. Dip the fur into the mixture, rinse well and shake well. At the end of all the manipulations, walk over the surface with a vacuum cleaner with a soft attachment, spread the fur coat on a flat table, spreading a white sheet. Sew on the lining when finished and wear with pleasure.
Oat bran
Wash the non-stick pan, dry, add 100 g. oat or flax bran. Turn on the stove and heat the composition, but never fry it. After that, lay the fur coat on a flat surface, sprinkle it with heated bran and rub it well. If the composition is not enough, cook more. At the end of rubbing, the fur must be carefully combed out with a special comb in the direction of the pile and hung on a hanger until completely dry. Then again you need to treat the surface with a clothes brush, being careful not to damage the fur. Some housewives, for lack of a comb, use a regular broom. In this case, there is a risk of contamination of the product.
Table vinegar
The composition is used to make hair silky and soft to delicate fabrics. For this reason, it is used for cleaning fur products. To prepare the solution, you need 9% table vinegar diluted with filtered water in a 1: 2 ratio. Dip a cosmetic swab into the resulting composition, slide it over the growth of the villi several times. Do not try to rub the stain with strong pressure, proceed with caution. After all the manipulations, wipe the fur with a damp cloth, dry it naturally (away from ultraviolet radiation) and comb.
Important!
Since rabbit fur is extremely delicate, only a mild vinegar solution should be used. If you are using essence, dilute it with 100 ml of water. product per 1 liter of purified water.
Baby powder
Buy baby talcum powder with or without chamomile from the pharmacy. The method is considered dry, since it does not require pretreatment with water. Cover the entire surface of the product with talcum powder, rub it well into the pile. Leave it on for 15 minutes to absorb any dirt and grease stains. After the expiration date, shake the fur coat to sprinkle talcum powder, vacuum it. Comb the product with a soft brush with frequent teeth (tool for animals is suitable). A hairdryer (cold air) or a fan will also help remove the remnants of the product. You can replace talcum powder with wheat flour, the principle of action is identical: poured, rubbed, removed with household appliances.
Petrol
Prepare cornstarch, clean gasoline (good for lighters) and a fur brush in advance. Before starting treatment, open all windows, carry out the procedure away from open flames. Keep children and pets away. Shake the fur coat several times, if possible "knock out" the dust from it in a convenient way. Take 100 gr. starch, fill it with gasoline so that you get a creamy mixture. Rub the resulting composition against the pile, shake it off, repeat the previous steps a few more times. After all the actions, comb out the fur coat, removing the remnants. The smell of gasoline will disappear within 2-3 days.
- Since rabbit fur is extremely soft, you cannot use hard brushes on floor surfaces, this mistake is considered the most common when processing products. After cleaning, the rabbit fur coat must be combed with a soft brush for clothes, then put on the cover and put it in the closet.
- With regard to winter storage, the product must be dried naturally before being hung on a hanger and stowed away in a cupboard. At the same time, keep the fur coat away from radiators and other heating devices.
- Very often, a white rabbit coat begins to turn yellow. To prevent such consequences, place it in a dark (if possible blue) case of a rag or paper form. Choose a cool storage location. Make sure there is no moth or mildew in the cupboard. Moreover, after placement, the fur coat should hang freely, otherwise it will be difficult for you to put the pile in order at the onset of the season.
- Gel cleaners are used to clean small items such as a hat or collar. Dissolve the cap of the preparation in warm water, and then dip and rinse the item several times, do not wring it out. Hang on a hanger and let excess water drain. Send to dry in fresh air, avoid exposure to heat appliances and direct sunlight. During the entire drying process, periodically comb the fur, do not let the fibers stick together.
- In cases where it is necessary to wash the lining on the hat, pull out the inner part, and pull the fur itself over a three-liter jar. Steam the pile, rinse the lining in water with the addition of powder. Dry the items and fasten them together.
Not many folk remedies have been developed to clean a rabbit fur coat, however, the above recipes are easy to prepare and available components. Use ammonia, 9% vinegar, pure gasoline, unscented baby powder, or semolina. Remember to do a preliminary test before each treatment.
Video: how to clean a fur coat
Rabbit fur products are among the most frequently purchased on the domestic market. It is not surprising, because not only fur coats, but also collars and hats are made from it. However, many owners of such things are faced with a problem that relates to the cleaning of fur. You will learn how to clean a rabbit fur coat at home in this article.
Grandma's secret to getting rid of dust
At a time when there were almost no cars yet, and most of the snow was white, not brown, fur coats were cleaned right on the street. To do this, it was laid with a pile on the snow and carefully knocked out. Ultimately, all the dust that accumulated in the garment fell onto the snow. The result is a perfectly clean coat. Now this method will be relevant only for residents of ecologically clean areas.
However, there is another way to clean such a garment - it will be relevant for residents of megacities. For its implementation, the snow is replaced with pure cotton cloth, after which:
- Hang a piece of clothing on a hanger.
- Wrap it in a pre-moistened cloth.
- The garment is carefully knocked out.
Important! If the dirt is heavy, you can replace the fabric and repeat the procedure. After all the dust has been removed, you can start getting rid of stains and greasy areas.
Fur of any type, including rabbit fur, is, first of all, a delicate material. If the measures for removing contamination are inaccurate, you can permanently spoil the material. Before carrying out this procedure, you need to remember a few points:
- Machine washing is strictly prohibited.
- It is unacceptable to use strong chemicals when removing stains.
- Do not brush the pile with a brush with frequent teeth.
- It is forbidden to dry a fur garment on a battery or using a hair dryer.
- To prevent yellowing of the white rabbit coat, it must be wrapped in a tight, dark, cold cover. It is better to store such a coat in a cool place.
- For rabbit collars and hats, it is best to use gel cleaners.
Taking these rules into account, you can significantly extend the service life of an expensive item and enjoy its warmth for a long time.
Basic methods of cleaning fur products
Before using the methods that will be described below, it is necessary to test their effectiveness on an inconspicuous area of clothing. To do this, you need to apply a cleaning agent, wait 15 minutes, then remove it and objectively evaluate the result. If it has not affected the product, feel free to use this method.
Application of hydrogen peroxide
This method is ideal for dealing with yellow spots caused by improper drying or prolonged contact with water. In addition to a fur coat, in this way you can wash a rabbit hat, for this you need to observe the following algorithm:
- Mix 30 ml of 6% hydrogen peroxide, 300 ml of pure water and 20 ml of ammonia.
- Pour the resulting solution into a spray bottle.
- Spray it onto a piece of clothing at a distance of 30-40 cm. Each drop should lie evenly over the entire surface of the item.
- Brush gently over the pile.
Important! In a similar way, both the entire product and its individual parts (for example, the collar and sleeves) can be cleaned.
Using semolina
Necessary materials:
- Vacuum cleaner (you can use a car).
- Basin or other container.
- Semolina. It can be replaced by regular potato starch.
Important! If the fur garment is heavily soiled, it is recommended to remove the fur part from the lining and wash each part separately.
To clean a rabbit fur coat at home, you must follow the steps described below:
- Pour about 10 liters of warm water into the prepared container, adding 1.8 kg of cereal or starch to it.
- Dip the fur in the liquid, rinse well and shake it thoroughly.
- When all the manipulations are finished, walk over the treated surface with a vacuum cleaner with a soft nozzle. Before that, you need to lay out the fur coat on a horizontal surface with a white sheet.
- When the procedure is completed, the lining should be sewn back.
The secret of oat bran
Even with the help of oat bran, you can qualitatively clean a rabbit fur coat at home. For this you need:
- Wash the non-stick skillet and dry it.
- Pour about 100 grams of oat or flax bran into it.
- Heat the mixture on the stove, but do not fry.
- Spread the fur coat on a clean table, sprinkle the heated bran on it and rub it in thoroughly. If the composition is not enough, do more.
- At the end of the procedure, the fur must be combed with a special brush in the direction of the villi, and then hung on a hanger.
- When the coat dries up a little, it should be combed again, taking care not to harm the fur.
Important! Many housewives use a broom as a brush. Do not take this into account, as there is a risk of staining the item of clothing even more.
Using table vinegar
Such a composition is used not only to wash a rabbit hat at home, but also to make the fur product silky and soft. To use this method, the following algorithm must be followed:
- Dilute 9% vinegar with clean water in a 1: 2 ratio.
- Dip a cotton pad into the solution and walk it over the contaminated area several times.
Important! Do not press too hard on the fur, and proceed with the utmost care.
- When the manipulations are finished, you need to wipe the product with a soft damp cloth, dry it naturally.
- Comb the fur coat or hat with a special brush.
Important! Since rabbit fur is very moody, only mild vinegar should be used. If essence is used, it must be diluted with cold water at the rate of 100 ml of vinegar and 1 liter of filtered water.
We use baby talcum powder
This method is referred to as dry, since it is not necessary to treat the product with water before carrying out the procedure. To wash a rabbit hat at home in this way, you need:
- Cover the entire surface of the product with powder.
- Rub it well into the pile so that all greasy stains are absorbed into the product.
- Leave the product in this position for about 15 minutes.
- When the time is up, shake the product and vacuum.
- Brush the product with a soft, fine-toothed brush. Its role can be played by a brush for animal hair.
- Remove talcum powder with a hair dryer or fan.
Important! Talc can be replaced with wheat flour, and the principle of action will not differ.
Gasoline use
Required materials:
- Clean gasoline (the one used to fill lighters is suitable).
- Corn starch.
- A brush designed for fur products.
Important! Before you start processing a fur coat, you need to open all the windows and make sure that there is no open fire nearby. You should also take into account the fact that children and animals should not be in the room.
So, here is the basic procedure that will help you wash your rabbit hat at home:
- Shake the fur coat several times. The ideal option would be if the product has already been knocked out on the street in the “grandmother's” way.
- Mix 100 g of starch with gasoline so that you end up with a mixture similar to sour cream.
- Rub in the resulting composition against the direction of the villi.
- Shake the product and repeat these manipulations several more times.
- When all the actions are completed, the fur coat needs to be combed, removing the remnants of the mixture.
Important! You may be bothered by the smell of gasoline after your procedure. Don't worry, it will wear off in 3-4 days.
The most delicate soft rabbit fur is an excellent choice for sewing outerwear. It is lightweight and keeps warmth very well. In combination with a democratic price, a fur coat becomes a desirable wardrobe item for many women of fashion, and caring parents purchase it for their children. The ease of dyeing and the range of styles add advantages to such clothes.
At the same time, the frequency of wearing a favorite item suggests that it is regularly cleaned from dust and dirt from city streets. How to clean a rabbit fur coat at home and not carry it to a professional dry cleaning company, this article will give detailed answers.
Warm and beautiful outfit for a charming womanDry cleaning methods
Any natural fur does not cope well with being completely wet. During the procedures, it is necessary to control the process so that moisture does not get on the leather base of the fur coat. Wet flesh becomes very tough after drying and may also shrink.
Cleaning is carried out on a flat surface or by hanging the outerwear on a hanger. The method depends on the selected cleaning method. Before the procedures, the product is thoroughly wiped out from dust contamination and possible debris.
Rabbit fur is extremely soft and delicate due to the fineness and length of the hairs. Coarse cleaning with hard brushes is not suitable for her. Dry options are considered ideal methods for cleaning fur.
Among the folk substances that have the ability to effectively absorb moisture and dirt in the fur fabric are starch, semolina and talcum powder. These powders also deal with grease, making the product shiny and fluffy.
The algorithm of actions for cleaning is simple:
- One of the proposed means is sprinkled on the surface of things from all sides and rubbed into the pile with smooth movements of the fingers.
- Leave the thing to act for 1 hour.
- Starch or talcum powder is carefully wiped out of the fur by hand, using soft clothes brushes and combs with rare teeth. You can remove the powder with a vacuum cleaner. But the intensity of air intake should be minimal so as not to damage the pile.
Important! The presence of residues of substances between the hairs of the fur should not be allowed. Otherwise, they will become an excellent bait for moths, and under the influence of moisture they will become a breeding ground for bacteria and microbes.
Common wheat or rye bran is also effective in the fight for the purity of the rabbit cover. They should be well warmed up, but not stinging and comfortable for the hands. For heating, a metal pan is suitable, which is ideally washed from foreign substances and odors.
Warm and elegant fur coat for winter The hot bran scatters over the fur. Next, gently rub the bran with your fingers to enhance the effectiveness of the ingredient. To remove product residues, the product is shaken and combed out. Work with a brush with soft bristles or with a sparse arrangement of blunt teeth on it. The direction of movement is along the growth of the pile, from the roots to the tips of the hairs.
Wet cleaning methods
Wet cleaning methods using chemicals are very popular among the people. It is absolutely impossible to wash a rabbit fur coat. The fur is prone to felting, and the warp may break or shrink. Therefore, at home, she is shown a maximum wet surface treatment.
The easiest way is to cover the fur coat with a damp sheet and knock out the dust. After that, the pile is wiped with vinegar and dried thoroughly.
In addition, you can always use a soapy foam or solution:
- The shampoo lathers in warm water.
- The foam sponge is moistened, slightly squeezed out, then the fur is wiped.
- Instead of shampoo, you can use dishwashing liquids, however, only colorless, not containing dyes.
- Then the fur coat is dried on a hanger.
After any wet procedure, the fur requires additional nutrition in order to restore its softness and shine properties. Glycerin will become irreplaceable in this case.
Important! It happens that during wet processing, lumps of fur are formed. To straighten them, you need to moisten them with alcohol and gently untangle them with your fingers. After untangling, you can use a comb and scrupulously comb the coat.
White Rabbit Fur Cleaners
Models of fur coats from light shades of a rabbit acquire an unattractive yellowness over time. Such a nuisance happens after repeated wetting in snowy weather and poor drying after that. How to clean a white rabbit fur coat from dirt and yellowness? There are several options for this:
White fur coat requires careful handling - First of all, a dry method of cleaning with semolina, talcum powder or with bran is suitable for white fur. After cleaning, the fur coat is moistened with a spray bottle and carefully combed with a wooden comb for a flattened look at the pile. Next is drying.
- Also, hydrogen peroxide is capable of correcting the situation with yellowness. A tablespoon of this product is poured into 200 ml of water, and then a few drops of ammonia are added. You should not get carried away with ammonia, as it is able not only to clean the fur, but also to dry it out. The resulting solution is poured into a spray bottle and sprayed over the surface of the fur coat.
- Do not neglect the cleansing properties of vinegar. Diluted in half with water, it is applied with stroking movements to the pile with a cotton swab. If the fur coat is heavily soiled, then the concentration of vinegar can be increased. If such household measures are not effective, you will need to contact a dry cleaner.
There is also a method of getting rid of the yellow tint based on optical illusion. It is implemented using a weak blue solution. A couple of drops of blue are added to a small amount of water for a light blue hue. With a foam sponge moistened with this solution, the fur part of the fur coat is processed with movements along the hair growth. Next - drying the fur coat on a coat hanger.
Drying and storage features
After wet procedures for cleaning fur or after a snowfall, when the pile is moistened, it must be thoroughly dried. However, electrical appliances and heating devices must not be used. Their action negatively affects the color of outerwear. This will be best seen on light-colored models. Fur needs to dry naturally at room temperature. The fur coat is hung on a hanger, the crumpled fur is neatly straightened by combing.
A completely cleaned and dried fur coat in the off-season is stored in a closet, after placing it in a linen cover along with a moth repellent. From time to time, you should ventilate the fur thing.
When trying to clean a rabbit fur coat, you should not forget about its service life. It is approximately 4 years old. After that, even the most effective methods may not bring the desired result.
