In the sixties, the flared skirt was popular and was the basic wardrobe item for all fashionistas, but then it lost its relevance. And today, the sun-flared skirt has returned to fashion catwalks and gained a new round of fame. She is worn for holidays and in everyday life. And you can sew it with your own hands, without having the special skills of a seamstress.
Style features
A flared skirt can be given any shape. Maxi is at the peak of popularity this season, a knee-length skirt is suitable for everyday wear, a mini is a great option for a party, going to a club or going to the beach. The minimum number of seams, the absence of darts makes it possible to sew a flared skirt in an evening. Use our instructions, and your outfit will make a splash, even if this is your first product.
Types of fabric
For beginner seamstresses, it is better to use a plain fabric or purchase a fabric with a small pattern. If you decide to sew a skirt with a large pattern, then be more careful when cutting so that the pattern is correctly distributed over the product.
For sewing a winter skirt, you will need a dense fabric - jacquard, wool, velveteen. Sew summer versions of the product from linen, satin, silk, chiffon, loose denim. Satin, velvet, velor are preferable for festive attire.
To determine the amount of material, you should count the length of the skirt twice and add the waist circumference and another ten to fifteen centimeters.
Pattern
To sew a sun-flared skirt, it is not necessary to make a paper pattern. Create a pattern directly on the fabric. You will need to measure two quantities - the length of the product and the waist circumference. The way to build a pattern is based on a geometric circle, with a hole for the waist in the center. The figure shows that the pattern consists of two circles. smaller radius R1- Corresponds to the circumference of the waist, the radius is larger R2– product length plus R1.
The main thing is the calculation of the radius of the circle, the so-called recess - the opening for the waist.
To do this, we use the circle radius formula from the school curriculum: R \u003d L / 2π, where L is the waist circumference, π \u003d 3.14 is the specified value.
Calculate the radius of the circle:
- Let's say L is 75 cm.
- We take the existing formula - R1 = OT / 2π, substitute the known measure OT R1 = 75 / 6.28.
- We get a result equal to 11.94 cm.
- The radius of the larger circle is easier to calculate, the length of the skirt is added to R1.
- For example, the length of the skirt is 50 cm. In accordance with this, R2 = 11.94 + 50 = 61.94 ... cm.
Be sure to note that at least one seam is needed on the product to create a fastener. And if your skirt is flared with an elastic band, when calculating the radius, you will need to increase the waist circumference in order to get freedom in the waist and more luxurious gatherings.
Laying out fabric for sewing
Before unfolding for cutting, we decant the fabric to avoid shrinkage. We put it in water and dry it without twisting or steam it with an iron.
Consider several options for placing fabric.
- The first. The fabric is laid out completely without folds. Cutting is carried out according to the principle of mirror image. Double-check the length, if the fabric allows, then you will get a product with two seams.
Note: for satin, shiny or pile fabrics, this method is inappropriate. The finished product has different overflows and the direction of the pile. - Second. Fold the fabric once. From the corner we count the length of the skirt, then the waist circumference and again the length of the skirt. We leave a few centimeters for the hem. In the center we build a notch according to the formula, as described earlier. When cutting, we immediately get two sides of the product. The skirt can be without seams or with one seam for sewing in a zipper. A long skirt will not work due to the width of the fabric.
- Third. Fold the fabric four times. And starting from the corner, we make a pattern of one fourth of the skirt, not forgetting to leave fabric for seam allowance.
Sewing
To sew a flared skirt, you will need:
- fabric and accessories of your choice;
- zipper 220 mm or elastic band;
- threads of the same color as the fabric;
- pins, sewing needles;
- sewing machine;
- scissors;
- steam iron.
We cut out on the fabric without using a paper pattern, we proceed as follows:
- We place the fabric in one layer.
- We take the resulting value of 12 cm and calculate it from the corner with an arc using a centimeter tape or a compass.
- From this line we count the length of the skirt plus allowances for seams.
- To increase the depth of the fold on the product, a deepening of the waist line on the pattern is required, somewhere by 0.8-1 cm along the shared thread.
Even from the school course of labor lessons, cutting and sewing, many women remember how to cut the First creation, sewn with their own hands. A skirt-sun or a half-sun skirt is just one of those. For many, this skirt was the first one they sewed themselves. And this is due primarily to the simplicity of the product. The pattern and sewing of such a skirt will not take much time and will please the eye for a long time. And even a beginner in sewing can quickly figure out how to cut a sun-skirt.
Versatility and variety
Sun skirts are a special niche among skirts in general. These are not only models for little girls or schoolgirls. Sun skirts can be appropriate for different ages and occasions. On the pages of modern glossy magazines, models are depicted in sun skirts and tight tops. For evening outings, a floor-length skirt made of satin or chiffon will look profitable and interesting. Lightweight and relevant in the warm season and in resorts, and a knee-length skirt made of dense fabric will look good on an office lady. And, of course, the cut of the sun skirt for wedding dresses with several layers of flying light fabrics has already become a classic. Appearance depends on how to cut and sew a sun skirt.
There are also derivative options. The finished product will differ in the number of seams, folds and, accordingly, the amount of material used. Half-sun, double and quarter-sun skirts are cut in the same way.
Each owner of a skirt with the opening of the sun feels light, fresh and feminine in it. And everyone who has ever sewed it himself knows how to cut a sun-skirt quickly and easily. You will need a tape measure or centimeter, scissors (ideally tailor's) and chalk, soap or a fabric pencil.
Choosing fabric for the "sun"
Before you cut a sun skirt for a girl, you need to choose the appropriate fabric. For the warm season, light "breathable" fabrics will be more appropriate and more convenient. The ideal option would be chiffon, satin, linen, chintz, batiste or jeans. Cotton fabrics will be pleasant for a daytime walk, and in a silk sun skirt you will be the queen of a summer evening.
For winter, warm, dense fabrics are traditional, such as wool, velvet, knitwear, boucle, jacquard and tapestry.
For costume parties, children's matinees or carnivals, you can decorate the sun skirt with flounces, sequins, lace or embroidery. It can be made from several layers of chiffon or dense heavy silk. The main thing is to think over the design of the future product in detail before cutting out the sun-skirt.
Nuances when choosing a fabric
The sun skirt has several nuances that you need to know before cutting and sewing the sun skirt.
Do not give preference to plastic fabrics that are easily pulled out, even if they are placed on the palm of your hand. The finished product will also quickly lose its shape by stretching down. If you still decide to stay on such a fabric, then it is better to make a skirt with a lining. Without a lining, such a skirt will “stick” and emphasize flaws.
For easily stretchy fabrics, it is necessary to make an allowance in width of about 5 centimeters.
If you decide to opt for a dark saturated satin fabric, you need to take into account the change in shade along the entire length of the roll segment. This will be most noticeable in black satin. When connecting the side seams, the satin will shine differently from different sides. To avoid this effect, it is recommended to make a pattern not along the equity, but along the longitudinal direction of the thread. This advice is relevant only for skirts-sun and semi-sun. Direct models exclude such an effect. Our finished product has several nuances that you need to know before cutting and sewing a sun skirt.
Striped "sun"
Do not opt for striped or plaid fabrics if you are new to sewing. Only experienced seamstresses and tailors can sew a striped sun skirt so that it would not be embarrassing to wear it in light later.
On one side of the seam, the pattern will turn out horizontally, and the other - vertically. To fix this, you can flip the seams. Remove the side ones, and make the main ones in front and behind. You can also cut the fabric not from the corner, but in the shared direction. Then it would be appropriate to make connecting seams in front and behind. The stripes will converge, visually forming a pattern with a pattern angle of 90 degrees.
If you want to sew a plaid sun skirt, be prepared for the fact that you will need a lot more material to match the pattern. Additional consumption will be easy to calculate, knowing the height of the rapport pattern. The larger the cell or its pattern, the greater the consumption. Add the height of the cage to each side of the pattern. Before cutting out a girl's sun skirt, try attaching square or striped designs to each other. Evaluate how best to combine them.
Necessary calculations
Correctly made measurements will help to cut the sun skirt correctly. If you do not have a centimeter, you can take measurements with thread. Do not use a hard tape measure. The measurements will not be accurate and the product will be damaged.
First you need to determine two sizes. This is the size of the hip circumference of the one for whom the skirt will be sewn, and the length of the product. After taking measurements, we write down the girth of the hips as O b and the length as D yu. For example, About b \u003d 90 cm, and D u \u003d 95. After that, you need to determine the radius of the waist circumference R1. It is calculated by the formula:
- (O b + 5) / 2p, where n is a constant equal to 3.14
Waist radius for example = (90+5)/6.24=15.22 cm
After that, we determine the radius of the lower part R2 of the skirt according to the formula:
- R1 + D and
Hem radius for example = 15.22+95=110.22 cm
You can use paper to create a pattern, but experienced seamstresses can do without it. If this is one of your first creations or you are not confident in your abilities, make a pattern on paper, cut out all the details, sew together and try on. Instead of paper, you can use oilcloth.
Getting to the pattern
So, how to cut the sun-skirt:
- We fold the material in half and begin to draw radii on it. Having folded the fabric in half, mark a point on the fold line in the middle of the length. From it we draw the radius of the waist. To draw a radius, measure from the starting point segments of length R1 and put points at their end. Then just connect them together. The resulting semicircle will be the radius R1.
- Similarly, draw the radius of the bottom of R2. Check the correctness of the measurements by measuring the distance from the first radius to the second. It should be equal to the intended length of your skirt. Leave a seam allowance of 0.5-1 cm above the upper radius, and 0.5 cm under the lower radius. The smaller the bottom allowance, the neater and more effective the hem will turn out.
- For a more even distribution of waves (fold), change the radius of the waist, bringing its center closer to the starting point by 1.5-2 cm (this step can be skipped). You can cut your pattern.
- After cutting out the sun-skirt, you need to transfer the patterns to the fabric. If there is no large table, you can sit right on the floor. It is important that when transferring the pattern to the fabric, it is motionless.
- If you want your future skirt to have only one seam, fold the fabric for cutting twice more. You will get four layers, which you will subsequently connect with one seam. The only disadvantage of such a product is a large consumption of fabric.
- For a more even distribution of waves (fold), change the radius of the waist, bringing its center closer to the starting point by 1.5-2 cm (this step can be skipped).
Half skirt
The process of how to cut a sun skirt and half sun skirt differs in the number of patterns and For a half sun skirt, more parts are needed, respectively, the number of seams will be greater.
The algorithm of actions is exactly the same, with the exception of the first paragraph. The fabric is not folded in half, but cut in one piece.
To save material, some novice seamstresses make a small but annoying mistake. Two patterns must be placed on the fabric in such a way that the left and right seams of both are located on the longitudinal and lobar sections, respectively. If you arrange the patterns in such a way that the left seam of one will be with a longitudinal cut, and the other with a shared one, then in the future this will have a bad effect on the product. Such joints will look messy, seams will be noticeable, bumps will appear.
How to cut a sun skirt with an elastic band
The top of the sun and semi-sun skirts can be varied. Someone uses a stitched belt, someone does not. You can tie a beautiful ribbon or belt over it. Elastic bands are inserted into light fabrics. A skirt with an elasticated waist will accentuate the figure of its owner.
The elasticated belt is cut entirely, preferably the direction along the elastic band can be inserted not for the entire length of the skirt, but in several places. In such a skirt it will be comfortable to sit for a long time. Such styles are relevant for overweight women.
Make a pattern for the future belt. Determine the width according to the chosen style, it may be different. Don't forget to leave allowances around the edges.
After processing the edges of the skirt, you need to fix the belt on it. Pin it on the skirt so that the front side of the belt is 1 centimeter below the top edge of the skirt. Sew in a way convenient for you.
There is nothing easier than cutting it. It will look stylish and relevant, and it will take a little time, effort and money.
What is the best way to sew a sun skirt with an elastic band:
- If you want a very fluffy skirt with a lot of pleats at the waist, draw a larger radius when cutting. Be sure to line up any folds before stitching. For dense and heavy fabrics, wide folds look more advantageous.
- Before sewing natural fabrics, in order to avoid deformation of the product, it is recommended to wash and iron.
- Choose the right patterns on the fabric that will not increase the figure. Elasticated sun skirt visually adds volume to the hips.
- If the bottom of the skirt ends up uneven, ask someone to help you. Put on a skirt and start slowly turning in a circle in it, the second person can hold any flat part and draw a new edge on it, with chalk, for example.
Today we have discussed in detail how to properly cut a sun skirt and avoid common mistakes. Good luck! Sew with pleasure!
An elegant sun skirt is a must have in your wardrobe. Tight-fitting at the waist, the skirt flares down, falling in soft wide tails. This model is an excellent combi-partner for creating different looks - from feminine to elegantly sporty. One of the options presented in the photo is a combination of a bright sun skirt and a leather biker jacket. Experiment, create fashionable bold combinations, and we will tell you how easy it is to sew such a sun skirt.
Sewing a sun skirt is very simple, and even beginners in sewing can easily cope with it. The design of the skirt-sun is a ring, which is formed by two circles drawn from one point.
Sun skirt pattern
To build a pattern, take 2 measurements:
Waist 72cm
Skirt length 75 cm
Calculate 2 radii. The first radius R1 = Waist circumference / 6.28 = 72 / 6.28 = 11.5 cm, the second radius R2 = R1 + Product length = 11.5 + 75 = 86.5 cm.
In order to draw the correct circle of a given radius, use a simple pencil and a flexible centimeter tape. Press the measuring tape with the zero mark at point A, press the pencil vertically against the centimeter at the desired mark. Draw two circles as shown in Fig. one.
IMPORTANT! Check the length of the first semicircle: A1A2 = 1/2 waist circumference. Since the cut is made on an oblique, after cutting, pull back the tailing section by 2 cm (an additional increase in freedom of fit is not required).
Belt: Belt length = Finished tail length + allowance, belt width 8 cm (4 cm finished).
Rice. 1. Sun skirt pattern
On fig. 1. given a pattern of a skirt-sun. From the main fabric, it is necessary to cut out the front half of the skirt and the back half of the skirt. Cut the back half of the skirt in the center - a zipper is sewn into the seam of the back half.
For sewing this skirt, you can use: satin, gabardine, thin neoprene. You will need about 4 lengths of fabric with a width of 145 cm, a zipper 25 cm long, threads.
Details of the cut of the skirt are shown in fig. 2.
Rice. 2. Details of the sun skirt cut
Cut out the front panel of the skirt in one piece, the back panel in two pieces (with a seam in the center). An example of the layout of the part on the fabric is shown in Fig. 3.
Rice. 3. An example of the layout of patterns on fabric
Stitch the side seams on the skirt, overcast and iron the allowances. In the back seam, .
IMPORTANT! At this stage, to prevent the skirt from stretching out during wear, moisten the skirt with a spray bottle and attach it to the mannequin. After drying, put the mannequin on the table and trim the hem, measuring the same distance from the surface of the table to the bottom of the skirt.
Bend the allowance on the bottom of the skirt and hem it manually with blind stitches.
Your skirt is ready. Create unique images and be happy! You will find even more new ideas on the website of the Anastasia Korfiati Sewing School.
If you have a daughter, then surely her closet drawers are full of various skirts and dresses, because even the smallest women are usually big fashionistas. One of the things that must be present in the wardrobe of every girl since childhood is a sun skirt.
The model of the original cut is extremely comfortable for young ladies of all ages. The youngest beauties love her because she looks very elegant, but at the same time does not restrict her movements.
Today we will tell you how to sew a sun skirt for your little princess. In this article, you will also find fashion tips for pairing a pleated skirt with different things.
Peculiarities
The sun is a very interesting style. Its unusualness lies in the features of the cut - if you unfold the skirt, it will take the form of a circle. Such a skirt is sewn in several different ways. The simplest of them is cutting out a circle from a single piece of matter; in this case, the product is obtained without seams. Also, a sun skirt can be sewn from two semicircles or made up of several wedges.
This model is usually planted on an elastic band. For children, this is the most successful option, since such a skirt is easy to take off and put on on your own. For older girls, a sun skirt, planted on a yoke, is suitable.
According to the age
Sun skirts are worn by young ladies, starting from the most tender age. Many carry love for this model throughout their lives, continuing to wear sun skirts as adult women.
4-5 years
Moms often dress up girls of preschool age in sun skirts. Elastic skirts are popular with little ones, and besides, they are very convenient for kindergarten, as they allow children to dress without the help of educators. In addition, such models are suitable for dancing and active games.
6-7 years old
When it's time to go to school, parents have to think about buying a school uniform, as it is now being introduced everywhere in educational institutions. In most cases, the school charter allows you to vary the styles of clothing, forcing you only to adhere to the color scheme and insignia. A skirt in the right color can be a great way to spruce up your school uniform.
8-10 years old
At primary school age, girls think not so much about the convenience of clothing as about its beauty. In this case, the sun skirt is a win-win option. Her models are very diverse: young fashionistas can choose between slightly flared and incredibly voluminous silhouettes, between high and low fit, between a mischievous mini and a modest maxi.
For teenagers
In adolescence, fashion trends come to the fore. Teenagers strive to be like their idols in everything, whether they are Hollywood stars or famous athletes.
During this period, children themselves tend to choose their own clothes and they should not be too limited in this. If you want to make a flared skirt for your teenage daughter, then it is best to choose the fabric and style along with it. Flip through fashion magazines, go shopping - this is a great chance to spend time together.
What to wear?
The skirt-sun will be perfectly combined with a variety of things from the children's wardrobe. It can be worn to school with a turtleneck, shirt, vest or cropped jacket.
In winter, it looks good with a sweater and pullover; You can complement the image with colored claws or leggings. This skirt is worn with boots or elegant boots.
In the warm season, sun skirts can be combined with a variety of T-shirts, T-shirts, light tops. In cool weather, you can put on a short summer jacket, such as a denim jacket. Any comfortable shoes will do: sandals, sandals, ballet flats, sneakers, etc.
How to do it yourself?
Even if you are a beginner needlewoman, it will not be difficult for you to sew a sun skirt with your own hands. Children's models are simpler in execution, so it is recommended to master this model from them.
Pattern
The first step in sewing any thing is making a pattern. To make a pattern, you first need to take measurements. We are interested in two sizes - waist circumference and hem length. The length of the sun skirt can be any, so we take measurements, depending on which model you have chosen - mini, midi or maxi.
Next, draw the pattern itself. To do this, we need to draw two circles. The length of the inner circumference is the circumference of the waist plus 2-3 cm of stock. Based on these data, we calculate the radius of the circle: divide the circumference by 2 and multiply the result by the number π.
The radius of the outer circle is even easier to find: it will be equal to the desired length of the skirt plus 1-2 cm for the edge. Having calculated the necessary parameters, we transfer the pattern to the fabric.
Sewing
A sun skirt can be cut out from a single piece of fabric or sewn from several elements - it all depends on the size of the canvas. To make it more convenient to transfer the pattern to the fabric, it is recommended to fold the material four times, then, using a tailor's meter, measure the radius of the inner circle from the central corner. Moving the meter in a circle, we apply markings on the fabric. Then, in the same way, we measure and mark the hem of the skirt. For greater convenience, before starting work, we advise you to fasten the material around the edges with safety pins.
›
The girl will definitely like the sun skirt, and for convenience and greater splendor, we will make it with an elastic band. Sewing a children's skirt with your own hands is very easy! To the main part, you only need to sew a belt and process the bottom.
Sun skirt pattern
The given scheme for constructing a sun skirt pattern is suitable for any age, even for an adult figure (if the assembly at the waist does not bother you).
For example, we will sew a sun skirt for a girl with measurements:
- Growth- 68 cm
- From= 46 cm
- skirt length du= 22 cm
We have a sun skirt with an elastic band, which means that the waist circumference needs to be increased. We double the size for dense builds. For a smaller density of assemblies, you can increase the waist by 1.5 times. The thinner the fabric, the more assemblies there can be and vice versa.
Calculation of the radius for the waist:
r\u003d (46 * 2) / 6.28 \u003d 14.6 cm (round up to 15).
To draw the bottom of the skirt, add the length of the skirt to the small radius (we have 22 cm) and get:
R\u003d 15 + 22 \u003d 37 cm.
In Fig. 1, for clarity, the pattern is presented in expanded form, in Fig. 2 - folded four times, like paper for a New Year's snowflake.
Sun skirt for a girl - calculation of fabric consumption
Cutting and sewing a children's sun skirt is easy, because the dimensions of its pattern do not exceed the width of the fabric. The skirt is seamless - a circle with a hole for the waist in the middle.
By the way, a small nuance - if you want to sew a sun skirt for your girl for a holiday, we change the pattern a little and get an interesting version of an elegant sun skirt with an extension at the bottom.
To do this, you need to take a longer skirt, then draw a circle around the bottom and cut the skirt along this line. Then unfold the skirt and move the waist opening a little forward, the skirt will turn out with an uneven asymmetrical bottom. Before cutting a hole for the waist, check how long you get in the front and how much in the back.
The resulting "tail" can be done from behind or from the side. Open in this case, do it on a fabric folded in half.
So, before you buy fabric, make a simple calculation of fabric consumption.
We take measurements of the girl's figure. We calculate the value R(see above), multiply it by 2 and add allowances for processing the bottom of the skirt. In our case: 37*2+0=74 cm.
The allowances are equal to zero if the hem of the skirt is processed with an oblique trim. If there is a hem, then add 1 - 2 cm. In total, we need a square with sides of about 80 cm. That is, in our case, even a narrow fabric will do.
The main principle of a seamless sun skirt is that the calculated value does not exceed the width of the fabric.
On the belt, the fabric will remain on the side (with a large width of the fabric). If the fabric is narrow, add twice the width of the waistband plus 2 cm seam allowances to the calculation. The length of the belt can be equal to the upper cut of the skirt (this option is easier to sew) or less than this cut, but more than the waist circumference (then the skirt will have to be assembled before attaching the belt.
How to sew a sun skirt
We connect the part of the belt into a ring, leaving the hole for threading the elastic band unsewn. Fold the belt in half lengthwise, iron. It remains to connect it with a skirt and insert an elastic band.
The length of the elastic depends on its softness - usually 10% less than the waist circumference, but it is better to check on the fitting.
Sun skirts tend to stretch in areas with an oblique direction of the threads. Therefore, in order for the finished skirt to remain with a flat bottom line, before processing it, fasten the skirt on the shoulders around the waist and let it hang for two to three days.
Aligning the bottom of a children's skirt with the sun is best when trying on. We measure the length from the waist, put marks (the more marks, the better). And then, spreading the skirt on the table, we connect it with a smooth line and cut it off. You can do this without trying on, by attaching the skirt to the waist line horizontally (for example, to the back of the back of a chair or chair).
But if the skirt is very small, then there is nothing special to align there. So process the bottom and admire your princess.
