Pipeline fittings are equipment installed on pipelines and designed to control the flow of working media in pipelines by changing the flow area. Control is understood as the distribution and regulation of working media, as well as their shutdown and mixing. Working media can be liquid, gaseous, powdery, suspensions, etc.
Pipeline fittings and equipment are functionally divided into shut-off, control, safety, protective, phase separation and distribution. Let's tell you more about each class of pipeline fittings.
Shut-off valves
Shut-off valves are designed to shut off the flow of the medium in the pipeline. Stop valves are divided into the following popular types: ball valves, various gates, valves, wedge valves.
The ADL pipeline valves catalog has the most complete line of shut-off valves both for use in utility systems and construction, and at industrial enterprises. We manufacture and sell such pipeline fittings as: steel ball valves "Bival", butterfly valves "Granval", swing check valves "Granlock", gate valves "Granar". ADL Company produces reliable, easy-to-use, durable shut-off pipeline valves for heat supply, gas supply, refrigeration, air conditioning and industrial systems.
Control valves
Control valves are a type of pipeline valves designed to regulate the parameters of the working environment. The concept of regulation of parameters includes regulation of the flow rate of the medium, maintaining the pressure of the medium within specified limits, mixing various media in the required proportions, maintaining a given level of liquid in the vessels, and some others.
Regulating pipeline fittings can be conditionally divided into two groups:
- Direct-acting control valves (the movable element of the valve is driven by the energy of the working medium). This group includes direct acting pressure regulators, level regulators, etc.)
- Indirect-acting control valves (the movable element of the valve is driven by external energy - for example, electrical energy or compressed gas energy).
Safety fittings
Safety valves are designed to prevent an emergency increase in any parameter in the working environment by selecting an excessive amount of the medium. For example, safety valves are endowed with this function.
ADL manufactures pipeline fittings and of this type - Pregran safety valves.
Protective fittings are designed to protect equipment from an emergency excess of any parameter of the working environment (pressure, temperature, etc.) by disconnecting a section of the pipeline. For example, check valves.
Phase separation valves
Phase separation valves are used for automatic separation of various phases of the working fluid, for example, water and steam (steam traps), water and air (air traps), etc.
Distribution fittings
Distribution valves perform the task of distributing the medium flow in two or more directions.
Selection of pipeline fittings
Depending on the class of industrial pipeline valves and operating conditions, a wide variety of requirements are imposed on its operation, the main of which are strength, long service life, reliability, cost, maintainability, safety.
To buy pipeline fittings from the manufacturer, contact ADL. Our advantages:
- processing of the application within 24 hours;
- assistance in the selection of equipment;
- prompt delivery of pipeline fittings;
- flexible discount conditions;
- affordable price of pipeline fittings.
The consequences of a wrong choice can be extremely dire. That is why the selection of pipeline fittings, especially for use on technological lines of industrial enterprises, should be carried out by professionals, and better by the manufacturer of pipeline fittings. With our equipment, your system will work efficiently and without accidents.
| ADL | |
Company `s logo |
|
| Type of ownership | private |
| Year of foundation | 1994 |
| Country | |
| Location | Kolomna, Moscow region |
| Key figures | |
| Industry | mechanical engineering |
| Products | pipeline fittings, pumping equipment, electrical equipment, instrumentation and automation |
| Manufactured brands | "ADL Production" |
| Trade marks on sale | The line of equipment of our own production "Made in ADL", pipeline fittings - Orbinox, VYC INDUSTRIAL, Mankenberg, Pekos, VIR, Swissfluid, Schubert & Salzer, Schischek; servos - Prisma, Valpes, PS-Automation; pumping equipment - DP-Pumps, Caprari, Milton Roy, Ebara, Verderflex, Yamada, CDR, Nijhuis; electrical equipment for protection and control - CG Drives & Automation (Emotron), Fanox, GRANCONTROL; instrumentation equipment - SMS, Muller Co-ax, Hafner-Pneumatik, WIKA. |
| Number of employees | 700 |
| www.adl.ru | |
ADL is a Russian company engaged in the development, production and supply of pipeline fittings, pumping equipment, electrical equipment and instrumentation.
Manufacturer ADL
Manufacturer: ADL Production
Country:
The main office and plant of the company is located in Russia.
Brief history of the company
ADL was founded in 1994 as the exclusive representative of a number of well-known European manufacturers. In 2002, the company began to produce its own equipment and opened the first production workshop in the village of Raduzhny, Kolomensky district. In 2009, a second production hall was opened, fully designed for the production of steel ball valves BIVAL.
ADL today
- 23 official representative offices throughout the Russian Federation: from St. Petersburg to Vladivostok, as well as on the territory of the republics of Belarus (Minsk) and Kazakhstan (Alma-Ata).
- 75 distribution agreements with various companies from large industrial and regional centers.
- 35 ADL service centers successfully operate in 20 cities on the territory of the Russian Federation and provide service and warranty maintenance for all lines of manufactured and supplied equipment.
Activity
By the beginning of 2014, ADL manufactures more than 20 items of equipment of its own production. Being a participant in such specialized exhibitions as Aqua-Therm Moscow, MEEG, Chemistry, Equatek, ROS-GAZ-EXPO, ADL became the owner of all kinds of diplomas, certificates, certificates and letters of thanks. ADL is a member of the community of engineers "AVOK" and "RAVV".
Made in ADL
"Made in ADL" is the motto of the entire line of equipment manufactured by our company, which means consistently high quality, not inferior to well-known world analogues, as well as the pride and responsibility of the company for the products and solutions sold:
- steel ball valves BIVAL, BV;
- butterfly valves GRANVEL;
- 2 and 3 eccentric butterfly valves STEINVAL;
- balancing valves GRANBALANCE;
- gate valves with rubber wedge Granard;
- pressure maintenance units GRANLEVEL;
- control valves GRANREG;
- safety valves PREGRAN;
- check valves GRANLOCK, filters IS;
- separators, steam recuperators GRANSTIM;
- steam traps STIMAX, air vents;
- condensate pumps STAMPAMP;
- condensate collection and return plants STIMFLOW;
- shut-off valves GRANVENT;
- pumping units GRANFLOW;
- control cabinets GRANTOR;
- frequency converters GRANDRIVE.
Manufacturing process
Our production is fully automated. All operations are carried out on modern CNC machines, and quality control of the manufactured equipment is provided by the latest test benches, made according to individual requests, taking into account the specifics of production. More than 1000 units of products are produced at the production complex every day. The efficient and well-coordinated work of our employees allows us to take on the most complex and voluminous customer orders, while guaranteeing strict compliance with the established deadlines.
100% quality control |
Ball valve production |
Pipeline fittings ADL |
Testing at all stages of production |
Objects where ADL equipment is used
 Server Palace "Yandex" |  Residential complexes "Don-Stroy" |  FORD Factory |
Representative offices of ADL in the CIS
The company was founded in 1994 as the exclusive representative of a number of well-known European manufacturers of high-quality engineering equipment. At that time, ADL was one of the first companies on the Russian market to introduce modern equipment for housing and communal services, water treatment facilities and construction. But from the moment the company was founded, the plans included the creation of its own production of high-quality equipment using the latest European technologies.
The result was the opening in 2002 of a plant in the village of Raduzhny, Kolomensky District (Moscow Region), where the first products of its own production were launched. And then - the opening in 2009 of a separate workshop with a full cycle of production of steel ball valves "Bival", expanding the range to DN 1200 mm, continuous improvement of its products and modernization of production.
The production of ADL is fully automated, all operations are performed on modern machine tools with numerical control, and quality control of the equipment produced is provided by test benches made according to individual requests, taking into account the specifics of production. Each product manufactured by Trade House ADL LLC undergoes 100% quality control in accordance with the current regulatory and technical documentation. The company has implemented and operates a quality management system of ISO 9001: 2015, which is confirmed by a certificate issued by experts from Det Norske Veritas, one of the largest international certification bodies.
More than 1,000 units of products are produced at the production complex every day. Prompt and well-coordinated work of our employees gives us the opportunity to take on the most complex and large-scale orders of clients, while guaranteeing strict compliance with the established deadlines, and streamlined production allows us to reduce the cost of equipment and get an attractive price and high-quality products for our partners and customers. Having our own design and engineering department allows us to develop individual engineering solutions for each specific project, if necessary.
ADL's regional network is represented by 24 official representative offices throughout Russia: from St. Petersburg to Vladivostok, as well as on the territory of the republics of Belarus (Minsk) and Kazakhstan (Almaty). 35 service centers successfully carry out service and warranty maintenance of all lines of manufactured and supplied equipment. In addition, more than 75 distribution agreements have been concluded with various companies from large industrial and regional centers.
