Autocom CDP is a program that diagnoses vehicles of different brands. In the program, you check the technical condition of cars and troubleshoot problems. Autocom CDP is designed to work with an adapter that works with the OBD-II protocol.

The software allows you to receive information using a special adapter that reads the error codes of the car's electronic unit. Using this tool, you will perform tests on different vehicle systems. The graphical shell of the program is designed for an entry-level user.

Functional

The main functions of the program are reading codes of breakdowns and deleting them, viewing information about vehicles, which is displayed in real time, as well as performing various tests.

Quick launch of the software requires connecting to the vehicle and entering the VIN. If not, enter the technical parameters to test the car. Autocom CDP is a universal program that reads data from ECUs of cars of different manufacturers.

Features of work

Autocom CDP is available for a fee. You will not be able to use the trial period of the software, that is, you will have to buy a license. In addition, the creators of this "tool" give a subscription for 1 year, that is, you need to pay a lot of money for a 12 month license.

The license for this program is available in different versions. You can subscribe to the regular version of the software or buy software with advanced functions. Do not forget that the adapter itself costs a lot of money.

Requirements

To run Autocom CDP, you need a computer with 2 GB of free hard disk space and the .NET Framework 3.5.

On computers with OS Windows XP, the program runs only on the latest Service Pack. The synchronization of this software and full-fledged work with the electronic control units of the car is provided via a USB cable or Bluetooth.

Key features

• quick check of the technical condition of vehicles of different categories;
• determination of transport models through the VIN-code;
• the software does not have a test period for working in the shell;
• the program reads and removes codes of problems;
• the utility does not require a lot of hard disk space and powerful hardware;
• scanning occurs through an adapter that is connected via a USB cable or Bluetooth network;
• all error databases are updated in real time.

Autocom CDP + CARS + TRUCKS Generic 4 in 1

The products offered are not hardware

AUTOCOM Diagnostic Partner AB and Delphi Technologies, Inc.

VD TCS CDP - New VCI +

is a co-platform device with a scanner Autocom CDP +

and has improved technical characteristics by an order of magnitude,

which provides faster performance and increased reliability

Version 2014.3

includes VAZ, GAZ, KAMAZ and UAZ

New versions

Autocom, Delphi, Opus, Motorscan, WOW

Add-ons & Utilities, Drivers, Firmware & Chip Dumps

Factory production

3989 RUBFree shipping!

There are 2 copies in stock.

Adapters forpassenger cars on 500 rub.:

Audi, VW 2 pin + 2 pin

BENZ-38 pin

BMW-20 pin

Are available

TOSet of cargo adapters:

7 pin Knorr, Wabco Trailer
12 pin MAN
37 pin MAN
IVECO-30 pin
SCANIA \ DAF -16 pin
BENZ-14 pin
Renault-12 pin
VOLVO-8 pin

Not available

Diagnostic interface Autocom CDP + together with PC or PDA and powerful diagnostic softwareNew VCI + and Autocom is a powerful and flexible tool for all garages, fleet owners, vehicle testing, road service, police and military. Article with description below.

The software is supplied:

New VCI + Cars
Heavy Duty Vehicles (New VCI +) Trucks

The WOW complex works with these adapters

Description of the software.

(as article)

Due to the fact that the necessary description of the software was not found on the Internet, I am giving a description of the analogue.

Autocom CDP + ( New VCI + ) for cars and trucks - universal 4 in 1

Autocom CDP + Cars
Autocom CDP + Trucks
New VCI + Cars

Heavy Duty Vehicles (New VCI +) Trucks

Autocom CDP + ( New VCI + )

It is a fast and reliable diagnostic interface that connects the vehicle and the computer. It works with old and new vehicles.
Allows to carry out diagnostics of cars and light vans since 1988. A total of 47 different brands. The software package provides diagnostics for light and heavy commercial vehicles, buses and trailers from 1995 onwards. A total of 37 different brands. The diagnostic program GENERIC is designed for diagnostics taking into account the legislation for harmful emissions from cars. The GENERIC is part of the software packages for cars and trucks.

Autocom CDP + ( New VCI + ) Cars & Trucks & Generic

This is a new professional diagnostic tool at a low price! The professional multibrand scanner provides excellent coverage for cars and trucks of European brands and performs well with Japanese and American vehicles. The undoubted advantage of the Autocom CDP scanner is its excellent localization and user-friendly interface. The connection of the system is extremely simple, which means that the diagnostician does not need to have deep knowledge in computer technology, but simply using the Autocom system to find the cause of the malfunction in the car electronics, determine the exact cause and determine the place of the breakdown (faulty unit, etc.). In addition to the cable connection to the computer via the USB interface, the Autocom CDP Pro scanner also supports a wireless Bluetooth connection. Autocom's price makes it a worthy budget alternative to the Launch x-431 Master multibrand scanner. The scanner software can also be installed on a Windows Mobile PDA. Autocom scanner running the current software version supports the following car brands: Alfa Romeo, Audi, BMW, Citroen, Dacia, Fiat, Ford, Honda, Hyundai, KIA, Lancia, Landrover, Mazda, Mercedes, MG, Mini, Mitsubishi, Nissan, Opel, Peugeot, Renault, Saab, Seat, Skoda, Suzuki, Toyota, Volkswagen, Volvo and others since 1988 - a total of 47 different brands. The software package provides diagnostics for light and heavy commercial vehicles, buses and trailers from 1995 onwards. A total of 37 different brands.

The diagnostic program GENERIC is designed for diagnostics taking into account the legislation for harmful emissions from cars. In GENERIC it is included in software packages for cars and trucks. 47 different brands, as well as 37 truck brands
Multiplexer function, 2xHS CAN (ISO 11898-2), SW CAN (SAE J2411), K / L (ISO 9141-2), VPW (J1850), PWM (J1850), RS485 (J1708), TTL and (SPI, analog input and 5 volt output).

"BLACK BOX"

With the flight recording function, you can record parameters in real time while you are driving. During recording, you can click a button to highlight specific errors so that you can examine later discovered errors. CDP + is equipped with built-in memory, thus eliminating the need to carry a computer with you.

MULTI-COLOR INDICATOR

With the multi-color CDP + indicator, you can fully control the diagnostic process. Various colors and sounds help to observe the process from a distance. For example, when the indicator color alternates between blue and green, CDP + is linked to the vehicle's control unit.

ADAPTER WITH LED LIGHT

To easily find the diagnostic connector in the car, even if it is located in dark and inaccessible places, there is an LED on the 16-pin connector.

VOLTAGE CHECK

When CDP + is connected to a vehicle, the battery voltage of that vehicle will be automatically checked and the device will adjust itself to the required vehicle voltage level: 12 or 24 volts. If the voltage gets too high or too low, CDP + will warn you with sound and light and also with the battery icon of the diagnostic software.

CHASSIS NUMBER -VIN

The vehicle software has a smart function that reads the chassis number of the vehicle being diagnosed. This ensures that the model and year of manufacture are automatically selected. In addition, the engine code for vehicles that are commonly available on the market is also automatically selected.

ISS

Intelligent System Scan (ISS) scans all systems in the vehicle and displays the error codes that are stored in each system. This saves time and provides an overview of the actual condition of the entire vehicle. At the end of the ISS, you can select a specific element of the control system for further analysis of the results.

ISI

Intelligent System Identification (ISI) identifies and automatically selects the type of controller installed in the vehicle. This ensures that the diagnostic sessions are carried out correctly with the correct and required parameters.

REPORT FUNCTION

By displaying this function, you can see the changes and adjustments necessary for a particular vehicle, without having it nearby. Help text ensures planning and efficiency, even in difficult situations.

OBD FUNCTIONS

CDP + is based on a unique multiplexer technology that allows it to be used on all types of vehicles, regardless of voltage levels and communication standards. For those vehicles that do not use the standard 16-pin connector, a full range of certified and customized adapters and cables are available.

HELP FUNCTION

For most OBD functions, such as corrections and programming, there are detailed instructions and help texts to aid in the diagnosis. Step-by-step information on the prerequisites, preparation and implementation of various functions greatly simplifies the implementation of even the most complex functions.

Peculiarities Autocom CDP + ( New VCI + ) :

User-friendly and intuitive software for cars, light and heavy trucks and buses
Fast and secure identification of vehicles and systems using Autocom ISI (Intelligent Identification System)
Intelligent Scanning System (ISS) - automatically scans all vehicle control units
Bluetooth and USB connections are standard
Software on CD / DVD or SD cards for pocket PCs
Fast and easy installation
Handles all current communication diagnostic standards for vehicles
reference Information
Reading and erasing fault codes
Reading data in real time
Restoring service messages
Possibility of programming for injectors, keys, remote controls, etc.
Unique multiplex technology that minimizes the need for specialty cables

Functionality and diagnosed blocks Autocom CDP + ( New VCI + ) :
Serial diagnostics
Scanning
Communication via EOBD / OBDII / OBDI
Engine
Ignition
Climate control
ABS
Resetting service functions
SRS
Immobilizer
Dashboard
Comfort systems
Gearbox, etc.

WITH Autocom CDP + ( New VCI + ) you can do the following:

Diagnostics of passenger cars
- Diagnostics of trucks
- Diagnostics by OBDII / EOBD protocols
- Reading identification data
- Autoscanning of all systems
- Connection to any electronic unit
- Diagnostics according to manufacturer's protocols
- Reading fault codes
- Erasing fault codes
- Decoding of error codes
- View data in real time
- Control of executive mechanisms
- Adaptation of electronic units
- Coding of electronic units
- Programming functions
- Tests of actuators
- Reset service intervals
- Correction of service intervals

Autocom CDP + (New VCI + ) supports:

Alfa Romeo, Audi, BMW, Citroen, Dacia, Fiat, Ford, Honda, Hyundai, KIA, Lancia, Landrover, Mazda, Mercedes, MG, Mini, Mitsubishi, Nissan, Opel, Peugeot, Renault, Saab, Seat, Skoda, Suzuki , Toyota, Volkswagen, Volvo, etc.

and Yuchai

Autocom CDP + (New VCI + ) works with trucks:

(if there are problems with archives - use WinRar 5 version)

Attention!!! Before calling for advice on installing programs - watch very carefully the attached videos on installing and configuring programs !

************************************************************************************************

Scanner programs that are installed directly on your WINDOWS:

- Opus (analogue of Autocom for passenger cars) 2.15.0 and MotorscanTruckPro 2.15.0 (for trucks) (installation instructions inside the archive)

- Instructions on how to install WOW 5.0.8 on your computer -

• Factory firmware Firmware (it is recommended not to flash the device, but to copy this folder with replacement to your Autocom / cars / Firmware folder with the replacement of files)

If there are problems with the device drivers, you can

An example of how to connect a scanner via bluetooth in a virtual machine -

An example of how the scanner works via bluetooth with a tablet (you can order it by phone)

******************************************************************************************************

Delphi (Autocom) 2014.3

We offer instead of installing all programs sequentially through the installation on your computer - to install all programs at once through Virtual machine... This installation method is faster, simpler and more stable in operation. In this case, you will immediately have the programs installed: Delphi (Autocom) 2014.3 Сars + Delphi (Autocom) 2014.3 Truck + WOW! 4.15.3 + WOW! 5.00.8

Version: 14.3
System requirements: - Windows, Linux, MacOS
- Intel or AMD 1.5 GHz and higher
- 1 GB RAM
- 15+ GB of free disk space
- USB port
Interface language: Russian
Tablet: Cured

Download and install one of these programs: Image VMware 12pro (64bit) or VMware 10 lite (32 / 64bit).

Uploading the virtual machine image:

- Delphi 2014.3 Cars
- Delphi 2014.3 Heavy Duty
- Wurth WOW! 4.15.3
- Wurth WOW! 5.00.8

You need to download the torrent file with these programs.

Delphi 2014.3 Cars

Delphi 2014.3 Heavy Duty
Activated to serial number 100251. All additional licenses entered.

Wurth WOW! 4.15.3

Wurth WOW! 5.00.8
Activated. All additional licenses and all GOLD keys have been introduced.

All these programs work with the Chinese clones of the Autocom CDP + adapter and Delphi DS-150E (s.n. 100251). Wurth WOW! can also work with Autocom CDP PRO, there is no link to the serial.
*******************************************************************************

Versions of programs for downloading for the VAS5054A scanner.

3 in 1 with advanced electronic board and latest software.The circuit is based on original chips from Samsung, Bosch, NEC.

Autocom CDP + new version of the popular multibrand scanner
now, in one device, support for cars and trucks (commercial) transport is carried out + improved circuitry of the electronic board, makes it possible to carry out stable and professional diagnostics of a huge number of cars, and the convenient illumination of the OBD connector allows you to easily find the diagnostic connector of a car in hard-to-reach and dimly lit places.

Also currently available version Delphi ds150e new vci.

Autocom CDP plus carries out computer diagnostics of old and new cars of most brands and models on the market.

Autacom CDP plus (3 in 1) allows you to diagnose:
1) passenger cars and light vans since 1988. A total of over 58 different brands,
2) light and heavy commercial vehicles, buses, trucks and trailers since 1995. In total, over 44 different brands.
3) diagnostics using common OBD-II protocols. The GENERIC program was created for diagnostics taking into account the legislation for harmful emissions of cars. GENERIC includes a software package for cars and trucks.

Functionality of the autoscanner by autocom: 2xHS CAN (ISO 11898-2), SW CAN (SAE J2411), K / L (ISO 9141-2), VPW (J1850), PWM (J1850), RS485 (J1708), TTL and (SPI, analog input and 5 volt output).

Flight recorder function "BLACK BOX"
With this function, you can record parameters in real time, while you are driving a car, the parameters of the systems will be recorded on the memory card. Autocom CDP + equipped with a built-in connector for a Flash card, thus eliminating the need to take a computer with you.

Multi-color and sound indicator
With color indicator Autocom CDP + you can fully control the diagnostic process. Various colors and sounds help to observe the process from a distance. For example, when the indicator color alternates between blue and green, the instrument Autocom CDP plus communicates with the vehicle control unit.

Diagnostic connector with LED backlight
To easily find the diagnostic connector in the car, even if it is located in dark and inaccessible places, there is a flashlight on the 16-pin connector. The location and design allows it to shine even when using an adapter cable for vehicles without a 16-pin diagnostic connector.

Voltage test
When Autocom CDP connected to the car, the vehicle's battery voltage is automatically checked and the device will adjust itself to the desired car voltage level: 12 or 24 volts. If the voltage gets too high or too low, then Autocom CDP 3 in 1 will alert you with a beep, beep, and battery icon of the diagnostic software.

Chassis number - VIN
The vehicle software has a smart function that reads the chassis number of the vehicle being diagnosed. This ensures that the model and year of manufacture are automatically selected.

ISS - Intelligent System Scan (ISS) scans all systems in the vehicle and displays the error codes that are stored in each system. This saves time and provides an overview of the actual condition of the entire vehicle. At the end of the ISS, you can select a specific element of the control system for further analysis of the results.

ISI - Intelligent System Identification (ISI) identifies and automatically selects the type of controller installed in the vehicle. This ensures that the diagnostic sessions are carried out correctly with the correct and required parameters.

Report function
With the help of this function, you can see the changes and adjustments necessary for a specific vehicle without having it nearby. Help text ensures planning and efficiency, even in difficult situations.

Compatibility
Autocom Cars + Trucks created using a unique multiplexer technology that allows its use on all types of vehicles, regardless of voltage levels and communication standards. For those vehicles that do not use the standard 16-pin connector, a full range of adapters and cables are available.

Versatility and helper functions
For most functions, such as adjustments and programming, detailed instructions and help texts are built in. Step-by-step information and tips make it much easier to perform even the most complex functions.

Main features and advantages of Autocom 3 in 1:
- Black and gray all-metal interface housing
- Compatibility with programs: Autocom, Delphi, Opus, etc.
(2013.3, 2014, 2014.2, 2014.3, 2015, 2015.1, 2016)
- Improved electronic board
- Supports 12 and 24 volts
- Trucks and cars in one device
- OBD cable with LED flashlight
- USB cable

Additional set of adapters-adapters for cars up to 2000 year:
PSA 30 pin cable - 1pc.
PSA 2 pin cable - 1pc.
Audi, VW 2 pin + 2 pin cable - 1pc.
MERCEDES BENZ 38 pin cable - 1pc.
BMW 20 pin cable - 1pc.
OPEL 10 pin cable - 1pc.
FIAT 3 pin cable - 1pc.
Power cable - 1pc.

Additional set of adapters-adapters for trucks up to 2006-2008:
7 pin Knorr, Wabco Trailer cable - 1pc.
12 pin MAN cable - 1pc.
38 pin IVECO cable - 1pc.
IVECO 30 pin cable - 1pc.
SCANIA \ DAF 16 pin cable - 1pc.
BENZ 14 pin cable - 1pc.
Renault 12pin cable - 1pc.
VOLVO 8pin cable - 1pc.

Attention! A new version of the site is available http://iDiag.by/
We are not responsible for improper and / or illegal use of equipment purchased from us, as well as for any damage to the vehicle. The user must notify any potential buyer of the car about the changed odometer readings and / or other changes made to the car.

© 2017 www.site
Car diagnostics and equipment (diagnostic autoscanners, adapters, cables for diagnostics, programmers, flashers, adapters) for car diagnostics can be bought from us. We sell equipment for computer diagnostics of cars in Minsk and across Belarus. With our equipment, car diagnostics are fast, simple and high-quality. Car diagnostics is primarily engine diagnostics, chassis diagnostics and diagnostics of electronic systems. Our catalog of goods consists of the following devices - automotive diagnostic equipment: diagnostic scanners (universal scanners, dealer scanners), motor testers (engine diagnostics), equipment for computer diagnostics (including programs for car diagnostics); additional diagnostic equipment: OBD adapters, odometer correction, chip tuning.