Size

48/50 (52/54) 56/58

You will need

Yarn (100% sheep wool; 100 m/50 g) – 950 (1000) 1050 g beige melange; circular knitting needles No. 5, length 80 and 120 cm; circular knitting needles No. 6, length 80 cm; stocking needles No. 6; 11 light beige buttons with a diameter of 2 cm.

Patterns

Rubber

Alternately 1 knit, 1 purl.

Garter stitch

Front and back rows - front loops.

Pearl pattern

Alternately knit 1, purl 1, shift the pattern by 1 stitch in each row.

Knitting density

24 p. x 26 r. = 10 x 10 cm, knitted with elastic on knitting needles No. 5;
16 p. x 32 r. = 10 x 10 cm, knitted in garter stitch on needles No. 6;
15 p. x 28 r. = 10 x 10 cm, knitted with a pearl pattern on needles No. 6.

Pattern

Completing of the work

Back

On short circular needles No. 5, cast on 126 (136) 144 stitches and for the bottom bar, knit with an elastic band of 3 cm = 8 rows.

In the last row of the elastic, evenly decrease 42 (46) 48 sts; to do this, knit 2 sts in sequence = 84 (90) 96 sts.

After 51 cm = 164 rubles. close for the armholes on both sides, first 4 p., then in every 2nd row 1 x 3 p. and 1 x 2 p. and 3 (4) 5 x 1 p. = 60 (64) 68 p.

At a height of 23 (24) 25 cm = 74 (76) 80 r. close the middle 22 (24) 26 sts for the neckline and transfer 19 (20) 21 sts to auxiliary threads on both sides of them.

Left shelf

On short circular needles No. 5, cast on 60 (66) 70 loops and for the bottom bar, knit with an elastic band of 3 cm = 8 rows.

In the last row of the elastic, evenly decrease 20 (22) 23 sts, to do this, knit 2 sts in succession = 40 (44) 47 sts.

Switch to size 6 needles and knit in garter stitch.

After 51 cm = 164 rubles. make an armhole like on the back = 28 (31) 33 p.

At the same time at a height of 16 (17) 18 cm = 52 (54) 58 r. from the beginning of the armhole, close from the left edge for the neckline 7 (8) 8 p.

Then, to round the neckline, close in every 2nd row another 2 (3) 4 times, 1 p. = 19 (20) 21 shoulder p. Transfer these loops to the auxiliary thread at the same height as on the back.

Right shelf

Knit symmetrically to the left front.

Sleeves

On short circular needles No. 5, cast on 60 (62) 66 stitches and for the cuff, knit with an elastic band of 3 cm = 8 rows.

In the last row of the elastic, evenly decrease 22 (22) 24 sts, to do this, knit 2 sts in succession = 38 (40) 42 sts.

Switch to needles No. 6 and knit with a pearl pattern.

On the 13th from the elastic band, add 1 stitch on both sides to bevel the sleeves, then 12 (12) 10 rubles in each. another 11 (12) 13 times 1 p. = 64 (66) 70 p. Include added loops in the pearl pattern.

At a height of 60 cm = 168 sts from the elastic band, close on both sides for the roll, first 4 sts, then in every 2nd r. 1 x 3 p., 2 x 2 p., 1 (2) 4 x 1 p., in every 4th r. 7 x 1 p. and in every 2nd p. another 2 x 2 p.

In the next purl row, bind off the remaining 18 stitches of the sleeve.

Knit the second sleeve in the same way.

Pockets

On short circular needles No. 5, cast on 24 loops and knit 1 cm = 3 r. with an elastic band.

Continue the work with a pearl pattern using knitting needles No. 6 and after 14 cm = 40 r. transfer the loops to the auxiliary thread.

Knit the second pocket in the same way.

Assembly

Pin the details onto the pattern, moisten and leave until dry.

Connect the open shoulder loops with a loop-to-loop stitch.

Sew side seams.

Hood

Using circular knitting needles No. 6, cast on 82 (88) 94 stitches for the hood (along the edge of the neck of the right front 30 (32) 34 sts; along the back neck 22 (24) 26 sts; along the edge of the neck of the left front 30 (32) 34 sts .). Knit on cast-on stitches with a pearl pattern.

After 29 cm = 82 r. distribute the loops onto 3 double needles: on the 1st and 3rd knitting needles, 30 (32) 34 p., on the 2nd knitting needle - 22 (24) 26 p.

The upper part of the hood is knitted using the classic heel-toe knitting technique: knit 1. R. Knit the loops of the 1st and 2nd knitting needles according to the pattern until the last loop of the 2nd knitting needle.

Turn, remove 1 stitch, then knit the loops of the 2nd needle according to the pattern until the last stitch, purl the last stitch of the 2nd needle and the first stitch of the 1st needle together. Turn and remove the first stitch.

Repeat these decreases until all the side loops of the 1st and 3rd needles are knitted, i.e. Only the loops of the 2nd needle will remain. Close these loops.

Clasp bar

For the fastener strap, cast on long circular needles No. 5 along the front edges of the shelves for 113 (115) 117 stitches and along the edge of the hood 106 (112) 118 sts = 332 (342) 352 sts.

Knit 9 rows in garter stitch, on the left front placket in the 5th round. R. knit 11 button holes. To do this, knit in the following sequence: edge, knit 1, knit 2 stitches, knit 8, from * repeat 9 times, knit 2 stitches, knit the remaining stitches.

In the next row of the bar, instead of closed loops, cast on 2 new loops. After 9 p.m. close the strap loops.

Sew the pockets to the shelf above the bottom strips at a distance of 5 (6) 7 cm from the side seams.

For the front strips, cast on 110 stitches on the knitting needles along the sides of the shelves, including the short sides of the neck strip, and knit in the same way.

Sew the seams of the sleeves, sew in the sleeves.

Sew buttons.

Photo: Knitting magazine. Burda" No. 4/2013

The weather is changeable, and in order not to depend on its vagaries, it is convenient to keep a warm and practical item of clothing on hand. A beautiful and cozy men's knitted cardigan will be a wonderful gift for a man of any age. The article presents a wide selection of models with patterns, which means that learning how to knit this item will not be so difficult.

Wearing rules

Cardigan - clothes for every day. It is suitable over a blouse or under a jacket. If the clothing style does not involve loose wearing, pay attention to the fit at the shoulders.

The optimal length is just above the hip, so as not to create unnecessary volume in the waist area.

The length of the sleeve is checked in the same way as for a shirt - for a model, the size of the sleeve covers the protruding bones of the wrist of the arms crossed in front of you. Ideal materials are natural. Cotton is universal for all seasons. For cold weather, a piece with a cowl collar or hood is suitable. A thin cotton cardigan is appropriate under a jacket. The cardigan should be in harmony in color and style with the rest of your clothing.

For every image

We present to your attention various models that can interest even the most picky fashion connoisseurs. With the help of this review, there will be no questions left about which option to choose for knitting.

For the young and daring

An informal cardigan with an asymmetrical fastening will highlight your individuality. Detailed description of production in the photo.

Noble beige

Voluminous cardigan with a voluminous pattern, a shawl collar, and buttons. Suitable for a tall, slender man.

Elegant and strict

A double-breasted cardigan with braids will demonstrate to others that this is a serious and practical man, and its owner will need it not only in early autumn, as a replacement for a jacket, but also in winter under outerwear.

The description of the model and knitting pattern are presented in the illustration:

Invitation for a walk

This cardigan is suitable for a traveler who loves long walks:

A description of the patterns and patterns can be found in the photo.

In the colors of the forest

A cozy elongated model with a voluminous pattern, distinguished by rich “natural” colors. Has a hood. Fastens with buttons.

Button up

Voluminous classic cardigan in light gray color. The attached diagrams will help you complete this model.

The return of grunge

This long, loose-fitting cardigan with a hood is simple and practical. This model is perfect for young people as casual wear.

It will require:

• wool yarn about 1000 g sand color;
• circular needles No. 5 and 6, double needles No. 6;
• matching buttons.

Product diagram:

The product fits sizes 48-50, 52-54, 56-58; Larger sizes are indicated in parentheses. Knitting techniques used: shawl, pearl pattern, elastic.

Detailed description of production in the photo:

It can be simply irreplaceable in certain circumstances. And it looks just great. Today I made a small selection of jackets with a hood. Look.

Lilac jacket

knitting

Dimensions: 38/40 (42/44)

You will need: 1100 (1150) g ​​lilac melange yarn Eve Color (44% wool, 43% polyacrylic, 13% polyester, 93 m/50 g), straight needles No. 6 and No. 7, circular knitting needles No. 6, 5 buttons with a diameter of 36 mm.

Facial surface: persons R. – persons p., out. R. - purl P.

Garter stitch: persons and out. R. – persons P.

Pattern for planks, knitting needles No. 6: 8 r. persons smooth, 2 r. garter stitch (= fold line), 8 p. persons smooth, 2 r. garter stitch = 20 rub.

Paths made of strands (7 p. wide): odd number of loops. 1st – 8th row: persons. smooth surface; 9th row: chrome, * 1 purl, 1 stitch, remove as purl, thread before work, repeat from * 1 purl, chrome; 10th row: purl. p. 11th row: chrome, 1 p. remove as purl, thread before work, purl 1, repeat from *, 1 p. remove as purl, thread before work, chrome; Row 12: purl. P.; 13th – 20th day: persons. smooth surface; 21st r.: as 11th r.; 22nd row: purl. P.; 23rd r.: like 9th r.; 24th row: purl. n. Repeat from 1st to 24th r.

Rubber, knitting needles No. 6: alternately knit 1, purl 1.

Knitting density. Pattern for stripes: 16 p. and 20 r. = 10 x 7 cm; paths made of plaits: 16 p. and 28 r. = 10 x 10 cm; elastic band (slightly stretched): 20 p. and 28 r. = 10 x 10 cm; persons satin stitch, knitting needles No. 7: 16 st. and 24 rub. = 10 x 10 cm.

Back: on knitting needles No. 6, cast on 66 (74) sts and knit 7 cm = 20 r. pattern for planks. Next, knit in paths of strands, while in the 1st row. evenly add 19 sts = 85 (93) sts. After 45.5 cm = 128 r. (47 cm = 132 r.) Close from the bar on both sides for the armholes 1 x 4 sts, then knit the middle 2 sts to fit the edges before closing the loops together, then in every 2nd r. close every 2nd r. 1 x 3 sts, with the last 2 sts knit together before closing the loops, then cast off 1 x 2 sts, with 2 sts knit together before closing the loops, then cast off another 3 x 1 sts = 61 (69) p.

Attention: On the pattern, the decreases for the fit of the edges are not taken into account. After 63.5 cm = 178 rub. (66.5 cm = 186 r.) close from the bar on both sides to bevel the shoulder 1 x 5 (6) p., then in every 2 r. – 3 x 4 (5) sts, and in each decrease, knit 1 x 2 sts together for seating before closing the loops. Simultaneously with the 1st decrease for the shoulder bevel, close off the middle 15 stitches for the neckline and finish both sides separately. To round, close from the inner edge in every 2nd r. 1 x 3, 1 x 2 and 1 x 1 p. After 65.5 cm = 184 r. (68.5 cm = 192 rubles) from the bar, all stitches must be closed.
knitting a jacket
Left shelf: cast on 40 (44) sts and knit 7 cm = 20 r. pattern for the straps, while in the last purl. R. close the first 7 p. = 33 (37) p. Next, knit paths from strands, while in the 1st p. evenly add 7 sts and from the left edge - 1 chrome. = 41 (45) p. After 10.5 cm = 30 r. close from the bar to the next. persons R. knit 24 (26) sts to enter the pocket, then put the sts aside, knit 1 chrome from the transverse thread. and on this and the next 17 (19) p. knit 16.5 cm = 46 r. according to the drawing, while in the last purl. R. added chrome. close the stitch again, knitting it with the previous loop together purlwise, then set the stitch aside. Now include the first 24 (26) stitches in the work, re-cast on 17 (19) stitches for the burlap pocket while working, and knit strand tracks on all 41 (45) stitches = 46 r. tracks with a tourniquet. Next persons R. connect the shelf and burlap pocket trace. in this way: knit 24 (26) stitches according to the pattern, then knit 1 stitch of the front with 1 stitch of the pocket burlap together 17 (19) times, with the pocket burlap behind the work. Next, on 41 (45) sts, knit according to the pattern. I will do the armhole from the right edge as for the back = 29 (33) p. After 60 cm = 168 r. (63 cm = 176) r.) close from the placket from the left edge to cut out the neckline 1 x 5 p., then in every 2nd r. – 2 x 2, 2 x 1 p. and next. 4th r. – 1 x 1 p. At the same time, bevel the shoulder from the right edge as for the back. At the height of the back, all items must be closed.

Right shelf: knit symmetrically.

Sleeves: cast on 36 (40) sts and knit between edges. 25 cm = 70 rub. with an elastic band. After 15.5 cm = 44 r. from the cast-on edge, add 1 x 1 p. on both sides for bevels, then 1 x 1 p. - in every 10th r. and 2 x 1 sts - in every 6th row, including added sts to the pattern = 44 (48) sts. Next, knit paths from strands, while in the 1st row. evenly add 15 sts = 59 (63) sts. After 23 cm = 64 r. close from the elastic on both sides to roll up the sleeves 1 x 3 p., then in every 2nd p. – 1 x 2, 12 x 1, 1 x 2 and 1 x 3 p. After 34.5 cm = 96 r. From the elastic band close the remaining 15 (19) sts.

Hood: on knitting needles No. 7, cast on 7 stitches for the left half of the hood and knit. satin stitch For bevels, re-type from the right edge in every 2nd r. 1 x 1, 2 x 2, 2 x 3, 2 x 4, 1 x 5 and 1 x 7 p. = 38 p. After 8.5 cm = 20 r. set aside from the cast-on edge of the stitch. Knit the right half of the hood symmetrically. Then knit both halves of the hood together, in the 1st r. both chrome p. knit in the back middle of the faces together. and mark the resulting p. as medium = 75 p. After 22.5 cm = 54 p. From the back middle, knit 2 stitches together in front of the middle loop. and after the middle stitch, perform 1 stretch (= remove 1 stitch as knit, 1 knit and pull it through the removed stitch). Repeat such decreases 6 more times in every 2nd r., then 6 times in each r., knitting in purl. R. before the middle loop, 2 stitches together, purl. cross. and after the middle p. - 2 p. together. = 49 p. Then next. persons R. Close the middle st and finish both sides separately. To round, close from the inner edge to the next. 2nd r. 1 x 3 p. After 32.5 cm = 78 r. from the back middle or after 41 cm = 98 r. From the cast-on edge, connect the remaining 21 stitches on each side using a “loop” or purl stitch. Knit each side of the work 1 p. purl. and persons sides of the hood together purl. and close them. Make a seam.

Assembly: on knitting needles No. 6, cast on 36 stitches along the edges of the pocket entrances, knit 1 purl. R. knits., then p. close knits. Sew the short sides of the strips. Complete the side and sew so that a drawstring is formed. On the short sides of the bottom of the jacket, grab the fastener strips. From inside Sew burlap pockets on the sides. For a hood cord 150 cm long, cast on 225 stitches on needles No. 6 and immediately cast them off again. Thread the cord from the faces. sides through the knitted fabric at a distance of 2 cm from the beginning of the neckline of the right shelf, pull it through the drawstring of the hood and bring it back to the faces. side through the knitted fabric at a distance of 2 cm from the edge of the left shelf. For a jacket bottom cord 260 cm long, cast on 390 stitches and immediately close their faces again. Pass the cord through the knitted fabric at a distance of 2 cm from the edge of the right shelf, pull it through the drawstring and bring it back to the faces. side at a distance of 2 cm from the edge of the left shelf. Sew buttons, shoulder seams. Sew the hood into the neck. Along the front edges of the shelves, cast on 110 (116) sts on circular knitting needles from/to the bottom slats and between them along the edge of the hood - 133 sts and on all 353 (365) sts, first knit 1 purl. R. faces., then knit the pattern for the strips. At 5 p.m. pattern for the strips (= faces. r.) make 5 holes for buttons in the strip of the right shelf. way: close off 4 p. and next. R. dial them again. Make the bottom hole at a distance of 4 (5) sts from the edge, the rest - every 12 (13) sts. After 3.5 cm = 10 r. from the beginning of the pattern for the planks, close in the next. persons R. first 72 (78) stitches, knit 209 stitches. and the remaining 72 (78) p. close the faces. For the double hood strap, knit on the remaining 209 sts, starting with 1 purl. R., another 7 R. persons satin stitch and 2 r. garter stitch, in the 1st r. on both sides of the chrome. knit knit 1 from the cross thread. cross. Then 211 p. close the faces. Sew in sleeves. Sew side seams and sleeve seams. Turn the bottom strip of the jacket and the hood strip along the fold line to the wrong side.

Brown jacket

size 38.

To knit a jacket you will need:
1100 g dark brown yarn (50% acrylic, 45% wool, 5% alpaca, 750 m/250 g);
straight knitting needles No. 5;
3 hanging fasteners;
darning needle

Attention! Knit in 2 threads.

Knitting patterns.

Garter stitch: front and back rows - front loops

Elastic band 1/1: alternately 1 knit, 1 purl.

Main pattern: knit with 1/1 rib, shifting the pattern by 1 loop in every 4th row.

Knitting density, garter stitch: 18 stitches and 20 rows = 10 x 10 cm.

KNITTING A JACKET.

Back.
Cast on 90 stitches and knit 7 cm in garter stitch.
Then knit with the main pattern, decreasing on both sides in every 8th row 4 x 1 loop.
After 63 cm from the cast-on edge for the bevels of the armholes, close 1 x 3 loops on both sides and 4 x 1 loops in each 2nd row.

Right shelf.
Cast on 56 stitches and knit 7 cm in garter stitch.
Then knit as follows: 14 loops in garter stitch, 42 loops in the main pattern, decreasing on the left in every 8th row 3 x 1 loop.
63 cm from the cast-on edge, bevel the armhole on the left, as for the back.
77 cm from the cast-on edge for the neckline, cast off 1 x 18 loops on the right and in every 2nd row 2 x 4 loops, 1 x 3 loops and 1 x 2 loops.
After 80 cm from the cast-on edge, set aside the remaining loops.

Left shelf knit symmetrically.

Sleeves.
Cast on 43 stitches and knit 7 cm in garter stitch.
Then knit with the main pattern, adding 7 x 1 loops for sleeve bevels on both sides in every 8th row.
After 53 cm from the cast-on edge for piping the sleeves, close on both sides in every 2nd row 1 x 3 loops and in every 2nd row 6 x 1 loop.
After 60 cm from the cast-on edge, set aside the remaining loops.

Assembly.
Sew shoulder seams; For the hood, cast on 120 stitches along the neckline and knit as follows:
14 loops in garter stitch (according to the pattern of the front panel), 92 loops in the main pattern, 14 loops in garter stitch (according to the pattern of the front panel).
Decrease after 14 bar loops and before 14 bar loops in every 2nd row 12 x 1 loop.
After 25 cm from the beginning of the hood, decrease on both sides of the middle loops in each 2nd row 11 x 1 loop.
After 36 cm from the beginning of the hood, set aside the remaining loops, fold the hood in half and connect the set aside loops with a knitted seam.
Sew in the sleeves, sew side seams and sleeve seams.
Sew fasteners (see photo).

Pattern.

Long jacket with a hood.

Long jacket with hood
Size: 40

You will need: 1700 g of nut-colored yarn MONPJAl MERINO MAXl (50% merino wool. 50% acrylic, 6Q m/100 G), straight and auxiliary needles No. 9,
darning needle

To get a product 1 size larger/smaller than indicated, you need to add/subtract 2 cm (4 stitches along the back, 1 stitch on each front) in width and 2 cm (3 rows) in length.

Purl stitch: persons R. - purl p., out. R. - persons l.
Pearl pattern (even number of loops):
1st row: alternately knit 1, purl 1, then each knit. knit purl and vice versa.
Extended loop:
1st row: remove the loop on the left needle as a purl, without knitting, thread at work;
2nd row: knit a loop purl;
3rd row: repeat rapport from the 1st row. Diamond pattern (22 p.): knit according to pattern 1; 35th R.: repeat rapport 3rd R.; In even rows, knit all stitches according to the pattern.

Braid (16 p.): knit according to pattern 2; 9th r.: repeat rapport from the 1st row; In even rows, knit all stitches according to the pattern. Density knitting. Pearl pattern and purl stitch: 10 p. and 16 r. = 10x10 cm; braid: 16 p. = 11 cm; diamond pattern: 22 p. = 16 cm.

Back: cast on 67 sts and knit 7 p for the placket. pearl pattern and 1 r. purl (only 4 cm). Next knit as follows: 5 p. satin stitch, 1 elongated st., 22 sts with a diamond pattern, 1 elongated st., 1 purl st. satin stitch, 7 p. pearl pattern, 1 p. purl. satin stitch, 1 elongated p., 3 p. purl. satin stitch, 16 p. oblique, 9 p. purl. satin stitch After 55 cm from the bevel bar, close the armholes on both sides in every 2nd r. 1 x 4 p. and 2 x 1 p.
After 20 cm from the beginning of the armhole bevels, close 16 outer loops for each shoulder and set aside the middle 22 stitches.

Left shelf: cast on 37 stitches and knit the bar as for the back, but knitting 1 elongated loop on the left. Next knit as follows: 9 sts. satin stitch, 16 p. oblique, 3 p. purl. satin stitch, 1 elongated stitch, 1 purl stitch. satin stitch, b stitch with pearl pattern, 1 elongated stitch. After 55 cm from the bevel bar, close the armhole on the right in every 2nd r. 1 x 4 p. and 2 x 1 p. After 20 cm from the beginning of the armhole bevel, close 16 p. for the shoulder on the right and set aside the remaining 15 p.

Right shelf: cast on 37 sts and knit the placket as for the left front, but knitting 1 elongated loop on the right. Next knit as follows: 1 elongated p., 6 p. with a pearl pattern, 1 p. purl. satin stitch, 1 elongated st., 22 sts with a diamond pattern, 1 elongated st., 5 purl sts. satin stitch After 55 cm from the bevel bar, close the armhole on the left in every 2nd r. 1 x 4 p. and 2 x 1 p. After 20 cm from the beginning of the armhole bevel, close 16 p. on the left and set aside the remaining 15 p.

Left sleeve: cast on 34 sts and knit the bar as for the back. Next knit as follows: 5 p. satin stitch, 1 elongated stitch, 22 stitches with a diamond pattern. 1 elongated p., 5 p. purl. satin stitch Add on both sides every 8th row. 8 x 1 p. and knit the added loops purl. satin stitch After 45 cm from the piping bar, close the sleeves on both sides in every 2nd r. 1 x 4 p., 1 x 2 p., 8 x 1 p. and 1 x 2 l. After 14 cm from the beginning of the sleeve roll, close the remaining 18 sts.

Right sleeve: knit like the left one, but after the bar, knit the loops as follows: 9 sts. satin stitch, 16 p. oblique, 9 p. purl. satin stitch

Assembly: sew shoulder seams. For the hood, transfer the loops placed along the neckline onto the knitting needles and knit as follows: on the loops of the right front, 1 elongated stitch, 6 stitches in a pearl pattern, 1 purl stitch. stitch, 1 elongated stitch, add 3 stitches between the next 6 stitches of the front and 3 stitches between the first 6 stitches of the back and knit the resulting 18 stitches purl. satin stitch; knit the next 11 stitches according to the pattern; add 3 sts between the next 6 sts of the back and 3 sts between the first 6 sts of the left front and knit the resulting 18 sts. satin stitch, then 1 elongated stitch, 1 purl stitch. satin stitch, b p. with a pearl pattern, 1 elongated p. After 19 cm from the beginning of the hood, decrease 9 p. on both sides from the middle ones. 1 x 1 p., knit 14 r. and reduce every 2nd r. 8 x 1 p. (on the wrong side on the right, 2 p. together, twisted, on the left, 2 p. together, purl). After 38 cm from the beginning of the hood, close off the remaining 47 sts.

Fold the hood in half and sew the corresponding loops of the last row together. Sew side seams, sleeve seams and sew in sleeves. Make 2 hinged stitches along the edge of the right shelf: for the 1st, insert the hook into the outer loop at the base of the hood, fasten the thread 1 connection. p., tie a chain of 8 air. p. and secure it with 1 connection. Art. in the outer loop of the shelf for 5 rubles. below; cut and fasten the thread. Perform the 2nd mounted step, I retreating 14 p. down from 1st. Sew buttons.

White jacket with hood

SIZES 36–42

YOU WILL NEED 350 g white GALIA yarn (50% merino wool, 50% polyamide, 50 m/50 g), 200 g TEBE ecru yarn (100% Extrafine merino wool, 140 m/50 g), 160 g white CAMELOT yarn ( 67% Superkid mohair, 3% wool, 30% polyamide, 500 m/50 g), size 4, size 5 and size 8 knitting needles, 5 buttons, 3cm diameter
Attention! To obtain a mixed yarn, combine 1 TEBE thread and 2 CAMELOT threads.

Pattern 1: knit according to pattern 1.

Pattern 2: knit according to pattern 2.

Knitting density. Pattern 1, knitting needles No. 5: 24 sts x 20 r. = 10 x 10 cm; pattern 2: 26 p. x 28 r. = 10 x 10 cm; purl stitch, knitting needles No. 8: 13 sts x 15 r. = 10 x 10 cm.

Back: on knitting needles No. 4 with an Italian set of mixed yarn, cast on 82 sts, knit 10 cm (= 26 r.) with a 2/2 rib. Switch to needles No. 8, evenly decreasing 16 sts (= 66 sts), knit with GALIA yarn in purl stitch. After 25 cm (= 38 r.) from the elastic band, close 1 x 3 p. for the armholes on both sides, then in every 2 r. 4 x 1 p. (= 52 p.). After 15 cm (= 23 r.) from the beginning of the armhole, close the middle 12 sts for the neckline and finish both sides separately. To round, close from the inside in every 2nd r. 1 x 3 p., 2 x 2 p. After 20 cm (= 30 r.) from the beginning of the armhole, close the remaining 13 p.

Left shelf: on knitting needles No. 4 with an Italian set of mixed yarn, cast on 40 sts, knit 10 cm (= 26 r.) with a 2/2 rib. Switch to needles No. 8, evenly decreasing 10 sts (= 30 sts), knit with GALIA yarn in purl stitch. After 25 cm (= 38 rubles) from the elastic, make an armhole, as on the back. After 10 cm (= 15 r.) from the beginning of the armhole for the neckline, close in every 2nd r. 3 x 2 p., 4 x 1 p. After 20 cm (= 30 r.) from the beginning of the armhole, close the remaining 13 p.

Right shelf: knit symmetrically.

Sleeves: on knitting needles No. 4 with an Italian cast-on, cast on 38 sts, knit 10 cm (= 26 r.) with 2/2 rib. Switch to needles No. 5, evenly adding 16 sts (= 54 sts), knit with pattern 1, adding sleeves on both sides for bevels in every 8th r. 9 x 1 p. (= 72 p.). After 38 cm (= 80 r.) from the elastic band for the edging, close the sleeves on both sides with 1 x 5 sts, then in every 2 r. 10 x 1 p., 2 x 2 p., 2 x 3 p. After 52 cm = 110 r. Close off the remaining 22 sts from the elastic.

Assembly: for the bar on knitting needles No. 4 with an Italian set of mixed yarn, cast on 13 sts, switch to knitting needles No. 5, knit with pattern 2. After 131 cm (= 328 r.) on the middle 3 sts, make a hole for the button, the next 4 holes - with an interval of 10 cm (= 28 rubles). After 174 cm (= 450 r.), close all loops. Sew the strip first to the left shelf, leaving 84 cm of strip free for the hood, then sew the strip to the right shelf.
For the hood, cast on 108 stitches using knitting needles No. 8 using GALIA yarn, purl stitch, decreasing on both sides every 4th row. 8 x 1 p. At the same time, after 10 cm = (16 r.) from the beginning of knitting, distribute the loops as follows: 47 p. purl stitch, knit 2 p. together knit., 2 p., knit 2 p. together knit., 47 p. purl stitch. Continue, decreasing on both sides from the middle 2 sts in every 2nd r. 5 x 1 p., 2 x 2 p. Sew shoulder seams. Sew the hood to the neckline. Sew in the sleeves, sew side seams and sleeve seams. Sew buttons.

Openwork jacket with hood

White jacket with hood

A hood or bonnet can be either a separate part of your clothing or an addition to a regular sweater/jacket. Children and teenagers love hoods very much. The hood looks especially natural on children's sweaters, fashionable hoodies, jackets and coats. Coat, jacket with a hood, is not only fashionable, but also functional. In snow, rain, and strong wind, the hood will save you from unpleasant weather conditions. Today we will tell you how to knit a hood with knitting needles.

You can knit a hood with knitting needles in different ways. The easiest way is to knit a rectangle and sew it along one side.

We knit the hood separately from the jacket. Cast on the required number of stitches on straight knitting needles. There should be exactly as many loops as there are loops along the entire length of the neck plus strips for fasteners. We knit a rectangle up to the height of the head plus 3-4 cm. The pattern can be used the same as on the jacket.

Hood pattern with knitting needles:

interesting selection for the site A selection of adult models

The second method is to lift the loops along the neckline of the sweater and start knitting the hood with the main pattern according to the method described above.

How to knit a hood-collar with knitting needles

In knitting, along with the classic hood, which resembles the shape of the heel of a sock, the hood-collar is especially common. There are several ways to do this. Here is the simplest of them.
The neck line on the base pattern for the back and front remains unchanged, only the dimensions of the fastener and hood are outlined. Knit the back and front pieces, leaving the neck loops open. Sew the product, place the neck stitches on one needle and, starting from point A, knit a row of knit stitches along the right side of the work. Slip the loops up to point A onto the right needle without knitting. Next, make the hood with a placket pattern, such as garter stitch, adding loops in the middle of the hood at the back (see the “+” sign) or along the edge of the hood.

When the height of the fabric reaches 35-38 cm, finish the work with an auxiliary thread, after ironing, unbraid it and sew the open loops with a loop-to-loop stitch.

There is another way to knit a hood.

For a classic hood, you need to pick up loops along the edge of the neckline. In order to be accurate, you should type on the front side. Fasten the thread at the beginning of the row and, using a knitting needle (or hook), begin to pull the working thread through the loop on the product. The loops remain on the knitting needle. Having cast on the loops, you need to knit 2 rows with a simple stockinette stitch.

Next, the hood is knitted in short rows. To do this, knit the next front row not completely, turn the knitting, yarn over, and again without purling the row, turn the knitting. Thus, first one side part of the hood is knitted, then the second is knitted. Thus, we knit a hood of the required length. Then close the loops on the sides.

After this, the middle part is knitted. When knitting the middle part, pick up the side loops and finish knitting. Several rows along the edge of the hood can be knitted with an English elastic band or crocheted openwork. This is what an approximate diagram of the hood looks like.

Interesting models with a hood from the Internet

Blue coat with hood

Beautiful and stylish model. The coat is decorated with large flowers and twigs with leaves at the back, while at the front it is a simple model.
Bust: 86 (97.105. 113, 120) cm. Size: XS (S, M, L, XL).

You will need: 12 (12. 13. 13. 14) skeins of Briggs & Little Atlantic yarn (100% wool. 124 m/11Zg), color – 73, red
- circular knitting needles No. 10-12, length 40 and 80 cm or another size to achieve the required knitting density
- Loop holder for braids
- 6 large buttons
- Markers for knitting
- Yarn needle
- 5 buttonhole pins or leftover yarn.

Size 43*61 cm.

This is a trending model from Vogue Knitting magazine.

Knitted Mocha Hoodie Hat by Sandi Prosser

The hood is knitted crosswise, starting from the front to the back and then a vertical seam is made.

Size 55 – 56, 57 – 58. Circumference at the bottom of the product (neck) – 47.5 (52.5). Height 25cm.

Hood with ears

For knitting you will need: Lana Gold Plus yarn (51% acrylic, 49% wool, 140 m/100 g) - 200 g beige, knitting needles No. 5, 3 buttons, hook, padding polyester.

Knitted hooded shrug

Sizes: 116/122-128/134-140/146 152/158. You will need 650-700-750-800 g of yellow yarn Schachenmayr SMC Cotton Time (100% cotton. 88 m/50 g); knitting needles No. 3 and No. 3.5; circular knitting needles No. 3.5; auxiliary knitting needle; 7-8-7-8 buttons.

Knitted scarf-hood

Scarf dimensions: length 210 cm, width 30 cm. Hood dimensions: 72x84 cm.

To knit a scarf-hood you will need 10 skeins of yarn (75% wool, 25% silk; 220 m/10 g); knitting needles 7 mm, auxiliary needle for braids, hook 7 mm, holders for loops.

Basic matings.

Garter stitch: knit stitches on each row;

Knit stitch: knit stitches in knit rows, purl stitches in purl rows;

Braids: knit 16 loops according to patterns A and B where only the front rows are shown (in the purl rows, knit according to the pattern), repeat rows 1-10 vertically;

Edge loops: knit in each row.

Knitting density:

13 p. and 20 r. = 10x10 cm with stockinette stitch thread in 2 folds;

16 stitches of braided pattern = 7.6 cm wide.

Interesting models with a hood on our website:

Yellow cape with hood

Sizes: 42(46).
Materials: 1000 (1,150) grams of “Merinos Otto” yarn (100% merino wool, 50 grams = 90 meters), knitting needles No. 3.5 and No. 4, hook No. 2.
Types of knitting: hollow elastic, 2×2 elastic, knit. satin stitch, purl smooth surface

Knitted tunic with hood

To knit a tunic you will need: CATANIA yarn (100% cotton; 50 g/125 m): 250 (300; 350) g ​​No. 00106 white, 300 (350; 400) g No. 00164 dark blue. Knitting needles No. 2.75 and 3. Circular knitting needles No. 3.

Vest with hood, knitted

Vest sizes: 36/36 (40/42) 44/46.

For knitting you will need: 400 (400) 450g. lilac Windsor yarn (55% merino wool, 31% royal mohair, 14% polyamide, 110 m/50 g); knitting needles No. 4.5; hook number 4.

Scarf with hood

The hit of this winter is a hood that smoothly turns into a scarf. The thing is not only fashionable, but also very comfortable.

You will need: yarn “Secret of Success” (100% wool, 250 m/100 g) – 200 g purple, knitting needles No. 4.

Coat with hood

You will need: 1700 g 1700 g of nut-colored yarn MONDIAL MERINO MAXI (50% merino wool, 50% acrylic, 60 m/100 g); straight and auxiliary knitting needles No. 8.

Melange jacket with hood

Jacket with a hood, knitted in two threads.

Size: S-M-L-XL – XXL – XXXL.

You will need: 350-400-450-450-500-550 g of Fabel yarn from Garnstudio color No. 161 (rose dream) and 350-400-450 450-500-550 g of color No. 153 (tex mech): Knitting needles 5 mm, 6 -6-6-7-7-7 metal buttons.

Coat size: OG 90 cm.
To knit a coat you will need: 700 g of thread, knitting needles No. 5.5; 4 large buttons.

Vest with hood

Vest sizes: 38-42

You will need: 750 g of blue yarn Linie 270 Faro (60% wool, 40% polyacrylic. 80 m. 50 g) double-sided transparent zipper 50 cm long straight needles No. 5 and No. 6 long circular needles No. 5 crochet hook No. 5.

Knitted models with a hood for children

Striped sleeveless vest with hood

Sleeveless sizes: 92 (104). You will need: 100 g each of orange and hot pink, 50 (100) g of cyclamen-colored yarn (100% polyamide, 90 m/50 g); straight knitting needles No. 3 and 4; fugue knitting needles No. 3.

Coat for girls with hood

Size: 68/74 (74/80) 80/86.

You will need: 300 (400) 400g of Linie Miranda melange yarn and 200g of Linie Champ orange yarn (100% merino wool, 70m/50g); knitting needles No. 7-7.5; hook No. 5.5; 3 buttons.

Size 2-3 years. You will need: “Popular” yarn (50% wool, 45% acrylic, 5% bulk acrylic, 133 m/100 g) - 400 g gray, the remains of thin gray yarn, knitting needles No. 4.5 and No. 2.5, 4 buttons.

Jacket with hood for boy

Size: 110/116. You will need: 450 g of beige Cool Wool yarn (100% merino wool, 160 m/50 g); knitting needles No. 4; hook No. 3.5; zipper 40 cm long.