Paper crafts >> How to make a frog out of paper

How to make a frog out of paper: one that jumps, one that opens its mouth, or one that is put on the fingers? We have collected for you the best origami videos, diagrams and instructions from all over the world. Just a few minutes and you can assemble it all with your own hands!

A paper frog is one of the most fun and yet simple paper crafts. You can collect it at home or at school. Collect from anything: stickers, notebook sheets, multi-colored paper. Make your own fun splash pool and play in a fun company. Whose frog jumps the farthest wins!

This video shows a very simple frog that jumps and has a pretty cute appearance. More likely, it's even a frog girl. Why? Just look at how cute her eyes are and how great they look on her face. At the end of the assembly, take a marker and draw on your pet’s eyes and mouth.

The model is very easy to assemble. Literally two minutes of work and you can already play. We press on the frog's butt with a finger or nail, release it and voila - the frog cheerfully jumps into the air and makes a long flight forward or somersault over its head.

For assembly you will need: a rectangular sheet of paper.

The most popular origami paper frog that jumps

This video clip is a real hit. This is the world's most popular paper frog that jumps. This origami craft takes a little longer to assemble, but it also looks more similar to the original. At least she has all four legs. The jumping principle is the same as the previous model. Only she can jump even further!

The video is without sound, but everything is clear without words. And use colored paper, colorful frogs look so much more fun. It is also desirable to make the eyes more contrasting, so it is better not to draw them, but to cut them out of paper of a different color and then glue them.

For assembly you will need: a rectangular sheet of paper, the width of which should be half the length (optimal sheet size: 15 cm x 7.5 cm).

How to make a beautiful frog out of paper with your own hands

And this paper frog is for real gourmets. Very, very few people will be able to assemble it with their own hands. The assembly scheme is very confusing and will take quite a lot of time. At the very beginning of this origami video you will immediately see the purpose of our assembly. This frog is a real beauty. Yes, it doesn’t jump, but it’s not a shame to put it on a shelf and you can definitely show it off to your friends and classmates.

For assembly you will need: a rectangular sheet of paper, the width of which should be half the length.

A cute frog on your fingers that opens its mouth

This video features the most unusual and amazing craft in our selection. This frog opens its mouth very sweetly. And he even talks. Not by herself, of course. You control it with your fingers, and with both hands at once. If you can also ventriloquize like this handsome young man in the video, then you will definitely become a star in your company.

This is a fun video in English, but don't be put off if you don't understand what they're talking about. Everything is very clear and clearly shown. Let us honestly warn you: a lot of small and delicate work awaits you. Especially with small details such as eyes. The most amazing thing about this paper frog is that it initially seems to be glued together from several parts. But it’s assembled, incredibly, from just one sheet of paper. Assembling this with your own hands is a real art of origami! Now put the paper friend on your fingers and go ahead and experiment with the pronunciation of sounds.

To assemble you will need: a square sheet of paper.

A simple frog made of paper for fingers that opens its mouth

Probably all students from all schools can make this frog on their fingers. It’s difficult to say why this craft is called a frog. It bears an extremely distant resemblance to our usual amphibians. After all, the creature consists of one mouth, which opens both lengthwise and crosswise.

The girl in the video explains everything very clearly. The circuit is easy, assembly is quick, almost any available paper will do. Finger control is also very simple, you don’t even have to practice. All that remains is to teach your new friend to speak. That is, learn to open her mouth in sync with your speech.

For assembly you will need: a sheet of A4 or notebook paper.

How to make a frog tongue out of paper

But this incredible video will teach you how to assemble something absolutely amazing out of paper with your own hands - a frog tongue. Well, not a real language, of course. And a paper craft that uses the same principle. Remember how a frog uses its tongue? It flies out of her mouth with incredible speed to grab a mosquito and just as quickly returns back to her mouth with the captured prey. Everything is the same here.

This is a very mobile and very lively craft, controlled with your fingers. The assembly and operating principle of the language are very simple. You will understand everything yourself during the assembly process. A little advice for the end - if you glue some kind of funny face or, on the contrary, a scary grimace to the tip of your tongue, you can scare your friends and make fun of your classmates in a very funny way.

For assembly you will need: a strip of thick, strong paper.

In this section, we have collected for you the best video instructions on how to make a variety of frogs out of paper with your own hands: simple origami frogs, models that jump, that open their mouths (croaking), and are put on your fingers. Diagrams and assembly videos in Russian and English.

Working with paper is the best way to develop motor skills. In order to captivate a child with various types of paper creativity, it is necessary to offer him to make interesting moving toys, for example, show him how to make a frog out of paper. Interesting mobile models of this amphibian can be created from paper using the origami technique.

Working with paper is the best way to develop motor skills

In order to amuse children, it is enough to make an interesting toy with them, for example, a simplified paper jumping toad. To create it you will need a green A4 sheet. How to make the simplest jumping frog step by step?

1. The short side of the sheet is applied to the right long side. Next, the triangle is unbent, and then the same step is repeated in relation to the left long side.
2. Next, part of the sheet is folded into a “double triangle” shape.
3. The lower corners of the resulting triangle are applied to the upper one.
4. Both side short sides are applied to the center line of the craft.
5. The lower straight side is applied to the middle of the upper triangle, and then folded in half in the opposite direction, forming an accordion.
6. The eyes are attached to the back of the accordion.

In order to amuse children, it is enough to make an interesting toy with them.

In order for the simple frog to be made to rest on its legs, the upper corners must be slightly bent down.

Gallery: paper frog (25 photos)

How to make a paper frog that jumps: step-by-step instructions

This diagram is a complicated version of the previous craft.

In order to make a jumping frog, you need to prepare a whole green A4 sheet

In order to make a jumping frog, you need to prepare a whole green A4 sheet.

1. A square is cut out of A4 sheet. To do this, you will need to attach any short side of the sheet to the long one, and the resulting excess edge must be cut off using scissors.
2. The resulting square is folded into a triangle. And then the triangle is folded in half again.
3. The resulting small triangle is folded into a square, which is immediately folded in half like a “book.” The resulting rectangle is folded in half again into a small square.
4. The entire sheet unfolds to its original state.
5. The entire shape is then folded into a “double triangle.” Folding occurs along two diagonals with the near corners connected. Moreover, the middle part of the figure should be pressed inward. This results in an isosceles triangle.
6. Equal sides of an isosceles triangle are neatly folded towards its midline (one on both sides).
7. Then the sides are bent back in the opposite direction.
8. The model is turned over so that there is an even triangle at the top.
9. The lower corners of the triangle are applied to the upper corner.
10. The future frog turns over again with its legs upside down.
11. The lower straight part (with protruding legs) stretches towards the corner so that the fold line passes through the thinnest part of the figure.
12. Next, the bent element turns back, folding in half.
13. The frog turns over and eyes are glued to the head area.

This frog jumps if you press your finger on the area of ​​its legs, made in the shape of a carved accordion.

Jumping frog (video)

How to make a toad: a simple diagram for children

To make a voluminous frog with your own hands you will need:

• 1 sheet of green cardboard;
• 1 sheet of green paper;
• glue.

Step-by-step instruction:

1. The body of a frog is cut out of cardboard, resembling a figure eight shape with eyes protruding at the top. It is also necessary to make a small protrusion at the bottom of the figure eight, which will act as a stand. To ensure that the frog's body is bleached on both sides, it is recommended to cut out 2 such bases and then glue them together.
2. Next, an applique is made: white circles are glued to the head in the place of the eyes, and smaller blue circles are glued into them.
3. A white circle is glued to the abdominal area.
4. At the bottom of the head, using a felt-tip pen, draw a mouth and nostrils.
5. In order to make movable legs, you need to cut 4 strips half a centimeter thick from green paper.
6. Each paw is made from 1 strip, which is folded like an accordion.
7. The result should be 4 accordions.
8. Next, you need to fold the fingers of the frog. To do this you will need 4 rectangles with sides of 3 and 5 centimeters. Perpendicular to the long side, these rectangles are folded like an accordion.
9. The finger accordion is glued to the limbs by wrapping a small amount of green paper strip.
10. Each spring with fingers must be glued to the area of ​​the upper and lower extremities.
11. To make the base, a circle is cut out of cardboard, onto which the completed frog is glued using a stand left on its body. The stand must first be bent in the opposite direction.

Children will love the toy

Paper frog opening its mouth: DIY craft

To make a croaking frog, you will need to take a square sheet of green paper.

1. The square is folded in half like a book, and then opened to its original state.
2. Both sides parallel to it are added to the resulting center line so as to form a rectangle.
3. The resulting rectangle is folded in half with the short side opposite it. Then the square is expanded again to a rectangle.
4. The short sides are folded towards the resulting center line on the rectangle, and then folded back.
5. The 4 corners of the rectangle are added to the long middle line.
6. Then each pocket obtained from the corner must be opened.
7. The inner corner of one formed rhombus is applied to the outer one.
8. And the inner corner of the second rhombus is folded inward, not reaching the middle, so that it forms an obtuse angle.
9. The craft turns over. The two outer corners of the figure are connected to each other.
10. The template is turned up by the side on which the slightly curved corners of the diamond are located.
11. The remaining upper symmetrical corners are bent back to the midline of the figure.
12. The slightly curved corners are raised to create space for the eyes.

To make a toad opening its mouth for children, you need to follow step-by-step technology

This mouth-opening frog works by bringing its insides together and spreading them apart. By the way, this figure looks like a frog from memes.

How to make an eye out of paper?

Making paper eyes for a toad is very simple.

1. To do this, you need to print or draw a small circle on white paper. A stencil can be used for these purposes.
2. Then a piece of paper is folded in half, then a circle is cut out along the drawn contour.
3. The result is 2 white circles of the same shape and size.
4. Next, you should prepare a sheet of paper of a different color. The iris will be made from it, so it is better to take a sheet of a dark or bright shade.
5. On the second sheet, draw a circle smaller than the white circle.
6. Next, the cutting technology is repeated.
7. Then the colored circle is glued into the center of the white one so that you end up with a rim around the iris.

To make the eyes look more expressive, you need to draw a small dot in the middle of the colored circle - the pupil. You can do it using a black felt-tip pen.

How to make a croaking frog with your own hands (video)

There are many different patterns that make it easy to create a variety of paper frog figures. Also, using similar application technologies, a frog mask can be created. And from origami, if we take the cap shape as a basis, there is a hat in the shape of this amphibian. You can also create your own original figures from paper; for this you just need to show your imagination.

For Halloween, you can make an interesting toy that opens and closes a scary mouth. This paper vampire is attached to his hand, and his mouth is moved with the help of his fingers.

Materials for work:

• Colored paper or cardboard;
• Scissors, ruler, pencil, glue stick.

How to make a vampire out of paper?

Cut a long rectangle from paper, for example, with a length of 24.5 cm and a width of 9.5 cm. Of course, the dimensions may be different, but with the ones already verified, you will make the craft much faster.

Fold the rectangle in half slightly (without making a fold in the middle) and round 4 corners at once.

Monster mouth

Next you need to make the mouth, pharynx or tongue, everything that can be seen there. But, if desired, this step can be greatly simplified by cutting out only one large rectangle. This will also be no less interesting and even scary, especially if the rectangle is in a dark color. It will seem that the monster’s mouth is completely creepy and dark.

In this case, the parts of the mouth, which at the first stage are in the form of rectangles, have the following dimensions:

• The largest has a length of 14 cm and a width of 7.5;
• Medium red is 10 cm long and 5 cm wide;
• Small 4.5 cm wide and 3.5 cm long.

Round the corners of the largest one. Make an oval from the middle one, only one side should be slightly narrower than the other. From a small one, cut out a shape approximately the same as in the photo. But you can do without it.

Glue the oval into the center of the large rectangle, and add a shape on top to represent the pharynx.

Now glue the mouth to the main oval rectangle that we cut out first.

Next, the monster will need a form. Here you can give free rein to your imagination: cut out funny or scary eyes, eyebrows, hairstyle, or even horns. If the paper is not very dark, all this can be drawn with felt-tip pens. Cut out two fangs if you are also a vampire.

Glue all the components of the monster's face where they were intended. And then you need to bend the paper and make the necessary folds. Look at the photo, the first fold should be along the upper edge of the mouth, the second fold should be in the middle, and the third should be along the lower edge of the mouth. It’s okay if you make a bend in the wrong direction; you can later direct it where you need it. But it’s correct if the top two protrude outward, and the middle fold is in the other direction from them.

The top part is bent.

Fold in the middle.

The lower part is bent back.

Glue the fangs to the top fold and cut two strips of paper. It is better if it is cardboard for greater strength and durability of the toy. Opening your mouth back and forth can quickly tear the paper.

Glue the stripes to the back of the vampire, or most likely his head.

That's all, the paper vampire on your hand is ready. You need to insert your fingers into the stripes and play or scare others with your opening mouth.

A monster with a closed mouth.

With open.

How to make a frog out of paper - step by step instructions.

How to make a frog out of paper - step by step instructions.

Are you coming up with new fun for children? Then it will be useful for you to learn how to make a frog out of paper - a funny jumping frog or a frog that opens its mouth in a funny way. You can put together a whole family of toy amphibians using the simple diagrams below. Then have a comic competition to see whose origami frog can jump to the goal the fastest. From a large leaf you will get a real frog princess, and from smaller leaves you will get her wonderful little frogs. All you need is paper, and any felt-tip pen will provide you with the eyes of your animal. The tongue is an original additional application. Shall we begin? Don't worry, our step-by-step instructions will guide you through every step of the process.

Option 1: the simplest manufacturing scheme

Let's start with a very simple diagram. A frog folded according to this pattern is perfect for warming up and for understanding the general principles of the origami technique.
Figure 1: Simple Frog Diagram

Option 2: jumping craft

Figure 2 will show how to make a frog out of paper in a couple of minutes. As you can see, in order for the frog to jump, the folds of the sheet are made according to the principle of a spring, which gives the shape of a funny amphibian. Nothing complicated, even kids can do it. It’s not difficult to make the little frog jump: you need to press your finger on the back of the toy and sharply release it, “sliding” back. However, first things first and in order:
Figure 2: Jumping frog

• First, let's learn how to make a frog from a rectangular sheet slightly narrower in shape. Divide such a sheet into 2 equal squares with the middle bend;
• Fold each of the squares so that a diagonal marking is formed in them (see Fig. 2), fold the future frog by folding the planes inward, as the diagram shows;
• Bend the free corners with the “ears” outward - this is the beginning of the formation of a spring mechanism to which the jumping frog will owe its skills;
• Turn the workpiece face down and form the head part of the toy, bending the upper corners of the part towards you (pressing the bends tightly);
• Grabbing the lower “legs” together with the main part of the part, make 2 folds of the workpiece, forming a push spring for the back of the amphibian;
• The jumping frog is folded, all that remains is to draw its eyes and glue the tongue. This way it will become even more interesting - much more realistic and funnier.

Similarly, you can fold such a craft from a square sheet of the correct shape. Everything here is even simpler than with a rectangular paper blank (see Fig. 2). Use different sizes of paper, thinking about how to make the jumping frog larger or smaller. But a toy that will participate in competitions for the distance or height of jumps must all be made from a sheet of paper of the same size (large frogs jump both higher and further).

Option 3: funny frog that opens its mouth

Have you folded a wah that jumps? A croaking frog will be no less funny, and it will take no more time than its predecessor. It also needs to be made from a square piece of paper folded into a regular rectangle. Let's take a step-by-step look at how to make a croaking frog. We recommend taking a larger sheet of paper for “rehearsal”, this will make it easier for you to master the folding algorithm. So:

• Line a square sheet folded into a rectangle (edge ​​up, as in Fig. 3) with folds according to the pattern, pay attention to the resulting “pockets” in the upper corners of the workpiece;
• Next, fold the bundle in stages, based on the diagram, systematically bending the corners mainly from the “head” part of the toy;
• Having obtained the “house” shape of the blank, bend the front planes of the toy. You have already succeeded in making a toad, and only your acting skills are responsible for sound production;
• By stretching the frog's face with its mouth opening in different directions like an accordion, you can imitate a talking or even funny singing amphibian.

Among all the paper characters, this frog occupies a special place. This is not a decorative, but an exclusively playful friend of every child, motivating the director's inventions. Each time the baby will give the paper frog a new role: a marsh tree frog, a funny singer, a talkative “clever girl,” etc. And, of course, making such a toy with your own hands is an excellent practical skill, one of the new stages in understanding the art of origami. Option 4: finished paper frog
Figure 4: assembling with glue Don’t understand how to make an origami frog using the described options or don’t want to deal with it? A ready-made paper pattern (Diagram 4) is your easy option for making a funny toy without any difficulty. The funny frog paper craft is a ready-made template that can be printed in any desired size. All that remains is to cut out the parts and assemble them with glue in 1-2 minutes. How to make other animals out of paper, see our “Origami” section. Here are the most interesting paper crafts (original envelopes, elegant roses made of corrugated paper, spring tulips and other flowers, figures of paper equipment, classic crafts like a Japanese crane or a paper swan) so that your paper frog will not get bored. Fold other paper crafts to make your collection even more interesting and varied.

Comments

Related posts:

How to make a paper steamer - step by step instructions How to make a boat out of paper or cardboard with your own hands How to make a cube out of paper using the origami technique using a ready-made pattern.

But there are so many ideas, you can’t implement everything.

So, at one time my child was interested in rockets, I didn’t think that a girl could be interested in this. They occupied it for about a month, and then smoothly gave way to croaking amphibians (I don’t know why, don’t ask). Naturally, I had a question about how to make a frog out of paper, as from the most affordable and budget material.

Let's start with origami, because this technique is familiar to us from childhood, or from school. It develops motor skills, logical thinking, attentiveness and accuracy.

But I propose to make not just frogs, but ones that will jump. To do this, you just need to fold a piece of paper correctly and press your finger on the back of the craft.

I offer you three step-by-step diagrams that describe the entire work process in great detail.

So for such beauties we will take a square double-sided piece. And by folding it in half and diagonally, we will find its middle.

Then bend the side parts marked with red dots towards each other inward.

The edge marked with a blue dot must be turned outward.

We also turn out the left corner.

Now look at the diagram, the red dot marks the corner of the already folded edge. So we wrap it towards the center. And we repeat the same actions with the neighboring one.

Here is another detailed diagram of this frog, maybe it will be easier for someone to repeat it.

Or another option.

Few people know that there is also modular origami. The product is assembled from many identical pieces.

Usually schoolchildren do origami. This technique is a little difficult for preschoolers, so I suggest making appliqués and postcards with them.

How to make paper crafts with children 4-5 years old

I will provide templates, descriptions and ideas for paper frogs. For example, such a voluminous craft has a stand (base).

You can do something similar using this scheme. Cut the workpiece along the dotted lines or along the contour. Fold the lower free edges and glue them together.

Of course, you can always find improvised materials that will give the toy a special touch. For example, this photo uses a disposable plate as a basis. They can be either cardboard or food-grade plastic. The remaining parts are cut out of paper and glued to the body.

A funny idea with an image of the outline of the palms. The child will be interested in tracing his palms. You just need to help cut them out.

Remember the puppet theater? Where cardboard or fabric puppets are pulled by the strings. If you print this blank, all that remains is to align the holes on the torso and limbs and tie them with thread or wire.

You can make many crafts from round blanks.

Or this one.

Decorate an ordinary glass with the head of a smiling frog.

Toilet paper rolls are also used for creativity. For example, a game was invented here: you need to catch the tip of a frog with your open mouth. Believe me, this will not happen right away.

Here are some more funny green frogs having a conversation.

Or you can play with the bushings like this. Just glue on long strips that will imitate legs.

And in this version, the craft can stand, and pencils or pens can be placed inside for storage.

Like here. So for some time you can replace the organizer and pencil holder.

I offer an interesting craft on a water lily leaf.

You can use this template.

I also liked the bookmark. We made completely different ones as children, so this option is not entirely familiar. But you will definitely notice such a corner and immediately find the right part of the book.

Of course, we need to make such an assistant.

Once again the origami technique came to our aid. Take a square sheet and find its diagonals.

Fold the sheet in half and turn the corner closest to you. And we find the middle of the outer triangles.

We wrap them inside.

And on one side we hide the edges inside. To make it more interesting, glue on the eyes and tongue.

And such a princess can be made from felt.

This frog seemed very funny to me. A perky smile and long accordion-shaped limbs give her a very fabulous look.

You don’t know what else to do with your child. I'll give you an idea! Cut out the head of the wah and insert a balloon into the mouth. When you inflate it, the child will see not your face, but a frog's.

Egg trays make such cute frogs.

Here's another idea for a three-dimensional craft. With funny bellies that give frogs stability.

For the applique, I suggest printing and cutting out this blank.

I would like to show you an easy master class on creating crafts from bushings.

Hanging view of a pencil holder. It is very convenient when it hangs on the cabinet door.

This option is also interesting. Look - the strips are used the same width. This is an important nuance for obtaining volume.

These little frogs have legs that move.

There is no shame in taking such a craft to kindergarten. If a suitable topic is found))

Here's another template for cutting. In addition to these parts, PVA glue will also be useful. It is considered the safest for children.

Make another wah out of hearts.

The highlight of this craft was the body, made from strips of the same length.

This is how you can entertain kids at a birthday party. Such whistles are sold in holiday departments.

Would you like me to show you how to draw a frog beautifully? Here are the step by step steps. All that remains is to repeat.

Such kids can be useful when creating an applique or postcard.

And you can make not only green frogs, but also yellow, blue or other bright colors. Children often go beyond their usual boundaries and let their imagination run wild.

Step-by-step instructions for creating a finger frog that opens its mouth

And for a puppet theater you can make such a toy for your fingers. The same origami technique is used. You can decorate the craft with eyes and a mouth. And also stick on a crown.