Home natural farming Recovery mode does not work. Recovery Mode on Android

Recovery mode does not work. Recovery Mode on Android

Recovery - what kind of program is this? Translated from in English into Russian "recovery"- this "recovery". Recovery is a program preinstalled by the manufacturer on the hard drive of a laptop or during internal memory smartphone, which allows you to roll back the device (laptop, phone, tablet) to its factory state. In smartphones, this program is launched from the off state by simultaneously pressing and holding the power button and the volume button for a few seconds (usually "up", but sometimes "down" or both at once). For laptops, this monotony is not provided.

How to run recovery (recovery) on laptops

After turning on the laptop, we begin to feverishly press the keys:
F3– MSI recovery;
F4– Samsung. Under OS it is possible through Samsung Recovery Solution;
F8 Fujitsu Siemens. In general, it often allows you to get on other laptops (through troubleshooting) into the proprietary utility for Recovery.
F8- Toshiba recovery;
F9- ASUS recovery;
F10- Sony VAIO. Under OS it is possible through VAIO Recovery Utility;
F10- Packard Bell;
F11- HP recovery;
F11- LG recovery;
F11-Lenovo recovery.
Alt+F10- Acer recovery. Before that, select Disk-to-Disk (D2D recovery) in the BIOS;
Ctrl+F11- Dell Inspiron;
F8 or F9- Dell XPS.
clamp- Rover

The Recovery menu is a special service mode mobile system Android. Available on all smartphones and tablets. It is used to launch if the user wants to quickly clear all information in the device, restore factory settings, change the firmware, and also in some other situations.

In the event that Recovery on the device has never been changed, it is called STOCK. If this menu was flashed, then it is already called CUSTOM.

Among custom recovery, CWM and TWRP are considered the most popular due to their functionality.

To enter the recovery menu on a turned off device, a special combination of pressing HOME, POWER, VOLUME + and VOLUME- is used. At the same time, on different devices you need to use different of these buttons.

Below in the article you can find a way for your device. By the way, there are special programs to launch this menu. One of the most convenient, called Quick Boot, we will consider here.

A universal way to enter the recovery on Android

Today, for many models from different manufacturers, the same key combination is suitable. Therefore, it makes sense to consider this method in the first place. Perhaps it can be called a universal way.

The procedure is as follows:

  1. Turn off your Android smartphone or tablet.
  2. Press the power button and then short press the volume up knob.
  3. The device will go into Recovery.

  1. With the device turned on, hold down the on/off button for a few seconds.
  2. A menu will appear on the screen with some parameters, where there may be a “Go to recovery” button or something like that.

If on your Android these key combinations do not lead to the desired result, then see below for all possible combinations specifically for each popular device line. For all other devices, one of the universal options described above is suitable.

Recovery on Samsung

If you have a device from the popular Galaxy line Samsung Electronics, then one of the the following ways. Keep in mind that all key combinations apply when the smartphone or tablet is turned off.

Ways:

Recovery on Sony Xperia

If you are the owner of a device from the Sony Xperia line, then turn off the device, and then turn it on and when the indicator lights up or the SONY logo appears on the screen, hold down the volume down or volume up key. On some models, there is also a click on the logo.

This option is also possible: turn off the device, hold down the power button and wait for a few vibrations, then release the ON / OFF button and quickly hold down the “Volume +”.

Recovery on HTC

First of all, the user needs to switch to Bootloader mode. In most cases, the battery is removed and reinstalled for this:

Recovery on Nexus

With the device turned off, hold down the following key combination: volume down and on / off (power).

Now find the Recovery item and go to it by pressing the power button.

We go into recovery using the Quick Boot application

There are also special programs that help you switch to Recovery with one touch of your finger. The procedure in this case is not at all complicated. Just open the Play Market, search for the application and install it. I decided to introduce you to one of the most convenient called Quick Boot.

After installation and launch, select the Recovery item in the program menu.

The device will successfully reboot into the mode Recovery, and you can continue working with the sections that you need, depending on the task at hand. For example, if you need to restore all factory settings on your device, you will work with the Wipe data (Factory reset) section, the Apply update from section is used to update the firmware, etc.

How to work in the recovery menu

Navigation here is done by pressing the side keys to increase and decrease the volume. The on/off button is briefly pressed to confirm the selected option.

Tip: if you are not sure of your actions, it is better not to experiment in this menu, as the consequences will be irreversible. Mobile devices Android, unlike the PC, will not issue warnings about possible problems.

What's in the recovery menu

This menu contains the following sections:

  1. Reboot system. When you click on this item, Android will reboot in normal mode. In case you just logged into Recovery out of curiosity, use this command to exit.
  2. Apply update from . This section is for updating installed firmware from the existing distribution, installation of patches, etc. In this section, you can select the type of update from the following list:
    1) Internal storage - from an existing option, including from system memory, file storage, memory cards;
    2) External storage - from some external device;
    3) Cache - from the internal system cache.
  3. Backup/Restore . Each device stores backup image systems. Clicking on this item will start recovery from this image. That is, the system will be completely updated to the state in which it was after the purchase.
  4. Wipe cache partition. The contents of the system cache will be completely deleted.
  5. Wipe data|Factory reset . Selecting this item allows you to reset all settings made by the user during the entire period of operation. The device will completely return to the preset factory settings. Please note that during the reset process, all information entered and saved by the user will be lost. Including all files, folders, music, videos, etc. However, the speed of the tablet usually increases by an order of magnitude after resetting the settings.

Recovery mode (aka recovery) on Android is a special hidden menu and is available on any smartphone samsung galaxy. This is a great tool that can be used to wipe data, factory reset, format system partition, install custom kernel, new firmware and many other things that should allow you to improve your smartphone and its system.

Recovery mode can be stock or custom. Stock Recovery Mode is the first and original version that is installed initially on a smartphone and you can work with it immediately after purchase. This mode works on a stock smartphone or already rooted, but not on a Galaxy smartphone that is flashed with custom firmware.

Custom Recovery Mode can only be installed after rooting your smartphone. There are two most popular custom recovery for ClockworkMod Galaxy smartphones - CWM and TWRP - Team Win Recovery Project. Both of them are very similar in their features and you can get the same features in either of them. Below you will learn how to download Samsung galaxy smartphone in recovery mode.

How to boot Samsung Galaxy smartphone into stock/CWM/TWRP recovery mode:

  • Turn off the device completely.
  • Press and hold the Volume Up buttons, the Home button, and the Power button at the same time.
  • Release the buttons when the smartphone screen turns on and you see the stock / CWM / TWRP recovery logo.
After you release the buttons, you will already see the main menu of the recovery mode. Here you can install desired parameters settings or execute important actions with the system, including installing custom or other stock firmware.

To boot in normal mode, you need to return to the main screen of the recovery mode and select the "Reboot system" item.

New on site

>

Most popular