Ribbon embroidery on the reverse side. Ribbon embroidery for beginners step by step, video. Tip: When sewing a chain stitch, always try to place the buttonhole strips so that the embroidery fabric is not visible between them

Elizaveta Rumyantseva

Nothing is impossible for diligence and art.

Content

A type of needlework is ribbon embroidery, which helps to create spectacular three-dimensional patterns on clothes or other objects. Beginning craftswomen should learn the basic secrets of performing the technique, learn how to choose materials, and perform basic elements. Then, when embroidering, you can give free rein to your imagination and try out complex designs.

Ribbon embroidery technique for beginners

Beautiful and attractive ribbon embroidery for beginners has several secrets in choosing tools and material. Here's what you should know about the step-by-step technique:

• Ribbons for embroidery can be of any material and width. It is optimal to buy silk, satin or satin strips with a width of 7-25 mm for embroidery.
• The fabric or canvas for embroidery must be of high density so that the stitches are secured securely. A novice craftswoman can practice using a special canvas and embroidery patterns, and only then begin decorating handbags, blouses or gloves. To make your work easier, you can transfer the design directly onto the fabric.
• Hoops – suitable from wood or plastic. Their purpose is to stretch the fabric and secure it for a smooth embroidery surface.
• Needles – Beginners will need special tools that are different from classic sewing tools. They have a wide eye that allows the ribbon to pass freely. It is important to compare the thickness of the needle with the strength of the fabric. The tool should be chosen smooth, without signs of rust, with a blunt end, so that when inserted into the fabric, the fibers do not tear with a sharp edge, but move apart.
• As for the auxiliary tools, beginners will need scissors, a lighter, matches, pliers and an awl. The latter are used when embroidering on thick fabric. It is useful to purchase special markers for drawing, which disappear 2 days after application.

How to learn to embroider basic elements with ribbons

After acquiring the necessary tools, beginners begin needlework and threading the ribbon into a needle. To do this, you need to cut one end straight and the other at an angle. The first is cauterized with fire, and the last is inserted into the ear with a slight pull. Then you need to insert the needle into the pulled out part in the middle, holding the needle with your hand, pull the burnt end to form a knot near the eye.

A step-by-step embroidery master class for beginners should start with the basic elements:

1. Straight (ribbon) stitch - insert the needle from the wrong side, insert it back, holding the strip.
2. Japanese (with curl) stitch - insert the needle on the front side. Straighten the strip and place it on the fabric, insert the needle into the middle of the strip and then into the corner of the fabric.
3. Twisted (stem) seam - remove the needle from the wrong side, turn it over so that the ribbon twists, insert from the front side.
4. French knot - bring the needle out from the wrong side, twist the strip around the needle several times, thread it back near the exit point.
5. Loop (air stitch) - bring the needle out from the wrong side, place a pencil under the strip, twist it around it, insert the needle into the same exit point.
6. Loop with attachment - performed in the same way as a simple loop, only in the center a bead, beads or French knot made of thin ribbon is attached.

How to embroider a bud with ribbons

Simple classic flower embroidery with ribbons for beginners, step by step, begins with creating a bud. It will require ribbons of two colors and careful work according to the scheme:

1. Draw a circle on the product and place a dot in the center. Divide the template into segments.
2. Bring the needle with the ribbon in the middle out from the wrong side, thread it back at the same point, leaving a loop with a radius equal to the circle on the front side. Pass the needle onto your face exactly along the circle line.
3. Pass the needle inside the loop, pull it to get a petal from the center to the line. Insert the needle at the exit point on the face to capture the loop. Insert from the front side, tighten the second short loop. Lay it out beautifully.
4. Repeat for 8 petals, then embroider in a different color.

Embroidery of petals with satin ribbons

Any simple ribbon embroidery for beginners includes floral motifs step by step, so it is important to know how to embroider classic petals according to the pattern:

1. Draw a circle and place a dot in the center of the sketch.
2. Bring the needle out from the wrong side in the middle of the circle, draw the strip face up to the circle line, straighten the folds at the point of withdrawal. Use a needle to connect the edges 5 mm beyond the circle line. Pass from the inside to the face of one edge, repeat vice versa for the other.
3. When you pull the tape through the edges, you will get a knot at the end of the petal. You need to wrap the end of the petal and the ribbon over it so that the petal remains convex. Insert the needle into the strip along the circle line on top of the petal, pull it out to the wrong side.
4. Tighten the knot to create a convex petal at the base, folded up and inward.

Embroidering stems with ribbons

When the flowers and buds are ready, novice craftswomen learn how to embroider stems and leaves. You need to do this step by step according to the following lesson:

1. The stems are embroidered with twisted stitches: stick the needle out onto the face, turn it with your fingers to twist the material, pierce the ribbon in the right place, bring the needle out to the wrong side. To secure, thread a needle onto the face near the puncture site, form a knot and move it to the wrong side.
2. The leaves are embroidered step by step using ribbon stitches: straighten the ribbon on the face, pierce it at 2/3 of the length, return to the wrong side, adjust the tension. Repeat the required number of times.

Floral ribbon embroidery for beginners

A simple lesson for beginners will be how to embroider a rosebud for a picture step by step:

1. Using a thread matching the color of the strip, make 5 stitches to create rays from one center - the outline of the flower.
2. Thread the ribbon into a needle, make a knot - insert the needle into the middle a short distance from the edge, holding the fabric, tie a flat knot.
3. Bring the needle and ribbon onto the face, twist 5 rays in succession so that the fabric looks shiny side up. The ribbon should pass alternately under and above the beam. Wrap the base thread sequentially, in a spiral, so that the rose petals are in a checkerboard pattern.

A lesson in embroidering lilac flowers for a painting for beginning needlewomen step by step:

1. You will need 2 needles - with ribbon and thread. Bring both to the front, make 2 stitches along the ribbon, 1 across, 2 along, 1 across.
2. Pull the thread and pull off the ribbon to create a flower.

You need to watch a detailed and educational video on this needlework technique. Pictures that have been embroidered using ribbons will become an original decoration for your home and will be a wonderful gift for any event. When they are made with one’s own hand, then such paintings will be considered the most valuable.

Together we will study all the techniques in ribbon embroidery. We will learn how to make basic stitches, embroider pictures, and we will reinforce all the material we are learning in video lessons and a master class.

Ribbon embroidery for beginners is the most interesting activity, and this requires knowledge of all the stitches used. Before you begin, familiarize yourself with the most common stitches:

1. Today, the regular straight stitch is very popular. It is the easiest to use. It is used for almost any type of embroidery due to its simplicity. If you pull the tape, you can independently adjust the stitch distance;
2. Japanese ribbon stitches. In this case, the ribbon must be passed not only through the working fabric, but also through its own base. It is worth noting that when the puncture moves to the edges of the tape, needlewomen have the opportunity to achieve unusual effects while working. Feel free to experiment with different tensions to create uniquely shaped leaves and petals;
3. Pre-fastened hinges. Ribbon embroidery for beginners is the most labor-intensive process. Needlewomen should learn exactly this method of creating a loop, because it is thanks to this seam that leaves, buds and various petals can be created.

Straight stitch Japanese Ribbon stitch Pinned buttonhole

How to quickly thread a ribbon through a needle

Ribbon embroidery for beginners is the study of a technique that will allow needlewomen to quickly learn how to thread ribbons through needle loops.

1. Cut the edge of the ribbon diagonally and thread it through the hole of the needle. Move the needle at a distance of at least five centimeters;
2. Next, you will need to pierce the tape with the tip of a needle at a distance of 5 millimeters from the edge;
3. The next step is to pull the tape, which should be moved along it until a knot forms on the ear;
4. After completing all the steps, the tape will be securely fastened. Needlewomen will be able to start working.

Video: ribbon embroidery for beginners

Materials and tools for ribbon embroidery

Ribbon embroidery from A to Z means, first of all, the availability of all the necessary materials and tools. To get started you will need:

1. Canvas or fabric. It is best if the canvas has a fine weave, and the fabric should be as dense as possible. In this case, the stitches will be held well;
2. Ribbons. For embroidery, you can take different varieties - silk, satin and nylon;
3. Embroidery from A to Z cannot do without a hoop, needle, pins, threads;
4. Additional accessories may include pincushions, beads, beads, pencils, markers, tracing paper, scissors, a thimble, rubber clamps, tweezers, an awl and many other things.

Video: introductory lesson on ribbon embroidery

Embroidery technique with satin ribbons

Ribbon embroidery for beginning needlewomen is an interesting way to spend free time and leisure time for every girl. Before you start embroidering, stretch the ribbon to the wrong side of the selected fabric. When everything is ready, secure the working tape tightly. Handicraft requires a sufficient amount of time, patience and desire from a beginner.

French knot

Using a flat knot, you can fix the tip of the tape, which should be no more than two millimeters. The presented type of knot will not add much volume to the embroidery. When the embroidery is finished, it is necessary to bring the needle to the wrong side, and also throw a loop on it. Experts advise that the technique of embroidering a picture with silk ribbons for beginners includes several main and fairly simple seams - straight and French.

While working, needlewomen will be able to perform various combinations to create flowers and even entire compositions. For beginners, our website presents a variety of simple and uncomplicated schemes. Everyone can learn a technique such as ribbon embroidery for beginners. Video lessons contain step-by-step instructions and other recommendations.

Video: main types of knots in ribbon embroidery

Tricks and secrets of ribbon embroidery

It is this kind of needlework that uses ribbons that is quite interesting and the most exciting activity. In order for the embroidery technique and process to be quite successful, you should know certain rules and tips. It would also be a good idea to watch and read a step-by-step master class from more experienced needlewomen. For these purposes, there are also video tutorials that will tell you in detail all the intricacies of embroidery.

Below is a master class that will answer a large number of questions:

• the needle is inserted carefully so as not to touch the threads;
• during operation there is no need to grab all the ends of the tape, which remain on the wrong side;
• when you need to embroider roses or petals with satin or silk ribbons, it is important to always remember that one side is matte;
• It is this handicraft that allows you to use an iron for ironing finished products. But only from the wrong side;
• It is not recommended to use wrinkled or unironed ribbons for work. Otherwise, the paintings will not have an aesthetically attractive appearance;
• You also cannot use ribbons that are no longer than 45 centimeters;
• It is advisable to start the embroidery process with canvas.

To learn how to embroider, familiarize yourself with all the subtleties that relate to this type of needlework.

How to embroider patterns with ribbons

Ribbon embroidery is a unique handicraft that will help you create original paintings. The master class below will help you understand the entire embroidery technique:

1. Select a suitable design, then lay the diagram out on a glass surface, above which the lamp should be on. You can also carry out work in the presence of daylight. Working fabric is placed on top of the entire structure;
2. The drawing is transferred to the canvas using a disappearing felt-tip pen;
3. You only need to hoop one fabric. It is necessary to cut the edge of the work exclusively at an angle. For this craft, cut a ribbon no longer than 40 centimeters. In this case, it will never twist or wrinkle while passing through the fabric;
4. To learn how to embroider with ribbons, you can watch video tutorials that show all the described embroidery techniques;
5. Beginners can learn simple stitches to begin with. The easiest one is the flat stitch;
6. When the work is finished, you can moisten a cotton swab with water and follow the mark of the felt-tip pen. Then they can disappear completely. The finished embroidery should be framed.

How to properly use satin ribbons for embroidery

Embroidery using satin ribbons for beginners is given below in the instructions:

Video: learning to embroider roses with ribbons

How to embroider lilacs correctly

Before you begin, you need to prepare the following tools and materials: canvas or fabric with small holes for ribbons. For ease of work, you can take a hoop, frame, needles, threads to match the ribbons, as well as many other things.

Step-by-step technique for embroidering lilacs:

1. The embroidery fabric is stretched onto a hoop or a special wooden frame.
2. Using colored pencils, you can transfer the design onto the fabric, and you need to convey all the details of the pattern.
3. Ribbons should be selected as carefully as possible.
4. It is best to start with a lilac branch and edge. To do this, a large needle is threaded into the fabric so that its tip is only on the wrong side. After this, you can tie a small knot on the ribbon, which is best hidden.
5. To embroider lilacs, you will need to thread the ribbon from the wrong side to the front side of the working fabric. Here you can remove the needle and silk thread. It is sewn only with small stitches across the work, after which you can make a few stitches along the edge of the tape.

Ribbon embroidery from A to Z will open for you new horizons of beautiful and breathtaking needlework! A flight of creative imagination will make this activity completely unique and inimitable every time.

Video: master classes on embroidering lilacs with ribbons

Embroidery is a long-standing women's occupation, which was once a natural hobby for almost every young lady, and then gradually lost its significance, but today interest in it has increased again. In hobby stores you can see not only standard cross stitch or satin stitch embroidery kits, but also more complex options: for example, with beads or ribbons.

What is special about ribbon embroidery, how difficult is it to master the technology on your own, and what can a beginner use to practice?

Ribbon embroidery for beginners: basics

This art came from Italy, although it gained particular popularity in France. The finished paintings, even if simply supplemented with elements of ribbon stitches, look amazing, and flowers are, of course, the most attractive in this technique. Glossy, voluminous buds and petals look just like life, you just want to touch them.

• To work, the craftswoman first needs to understand the tapes themselves: depending on the idea, their width can be either 2 mm or 50-55 mm. But the most optimal size is 7-25 mm. Accordingly, the larger the part, the wider the working belt will be.
• The most effective material is silk, but for beginners it is impractical due to its high cost, so it should be replaced with satin. It has a less pronounced shine on the front side, it is a little denser, but much more affordable. Satin is even denser, even stiffer, so it is not suitable for all parts, and it is convenient for them to work only if the tape is narrow.
• With fabric, everything is a little more complicated: it is easiest to embroider according to a pattern already applied to the material. In addition to the fact that you won’t have to endlessly monitor the space for fear of making a stitch in the wrong direction or the wrong length, you will know for sure that you have a fabric that is comfortable and ideal for the job. If you buy a simple clean cut, buy regular canvas (Aida 11 is perfect due to the size of the cells) or linen.

The main nuance when choosing fabric for beginners and experienced craftswomen is its density. The material must be stiffer than for cross stitch, otherwise the stitches will not lock and will pull the base along with them and become deformed. The picture will be ruined. And after you learn how to make basic details on such fabric, you can immediately try to make markings on ordinary things that you would like to decorate with a ribbon pattern.

• Make sure you have a lighter or at least a candle and matches: fire is needed to burn the tape so that its edge does not crumble. For fabric without markings, you will need water-soluble markers.

It is also recommended to purchase a hoop, the size of which is selected individually: for beginners, the most convenient diameter is considered to be 20-22 cm. Needles for ribbon embroidery are identical to those used for cross-stitching: they have a wide and elongated eye, and a rounded tip. The thickness is selected according to the fabric, so there is no universal advice here. The only thing is to pay attention to the numbering: for the thinnest ribbons and small holes in the fabric - the largest needle number (20 or 18, etc.), and vice versa.

Regardless of the pattern you choose - and even before you find it - you need to learn how to correctly thread the ribbon into the needle and perform basic stitches. So, cut the ribbon from the spool: the length is selected individually, but for starters it is better to take 2 lengths from your wrist to your elbow. Now make a 45 degree cut at either end; leave the opposite one flat and melt it with fire. The diagonal tip needs to be inserted into the eye of the needle, pulled out a little, pierced at the edge with a needle and tighten the knot. Now you are ready for the first test.

• It is recommended to start with embroidering roses with ribbons - we suggest you get acquainted with some of the simplest techniques. To do this, make a long stitch, but do not tighten it too much - let it sag a little. Then bring the needle visually in the middle, but at a distance, pull out the tape, use it to grab the center of the stitch and return the needle to the same hole. You will get 3 “rays” coming out from one point.
• Now, mentally drawing a circle that the tip of each of these rays should touch, and on it, in the center between 2 of them, draw a needle with a ribbon. Stretch it, as shown in the photo, through the far beam, bringing it under the stitch, and insert it at the same level into the fabric, but on the opposite side.
• After the skeleton of the flower of 5 rays has been formed, you can begin to design the bud itself. Pull the needle with the ribbon exactly in the center, from under the stitches, and begin to move it in a circle, in a counterclockwise direction. When meeting each ray, it should pass either above it or below it, alternating these options. The formation of circles is completed when the skeleton of the flower is no longer visible.

• Poppies in ribbon embroidery are even simpler to design, but ribbon alone will not be enough here: You will need a very thin thread, which you need to use to stitch its long edge with small stitches. After this, the thread is tightened to create a round open flower. It is advisable to first fold the ribbon in half lengthwise and stitch along the folded double edge so that the finished element is very voluminous and fluffy.

And the daisy embroidered with ribbons is straight stitches diverging from the center with the obligatory straightening of the material. The yellow center can be made up of many small nodules. The needle is brought under the outstretched tape, the latter is wrapped around the steel base several times, and then the needle is inserted back into the fabric at the same point. The knot is tightened, the edges are straightened, and a voluminous flower bud is obtained.

• You can create an embroidery pattern yourself by choosing a large pattern in the colors you like and marking it on the fabric. Most often, craftswomen simply combine several single elements into one picture, since this takes less time than searching for a finished image. Moreover, almost each of the schemes can be implemented in several versions. We offer you several sketches to try.

• Such a spectacular bouquet of daisies is obtained from standard straight stitches of different lengths, twisted ribbons as stems, and knots for small rare buds. Rounded large leaves are also straight stitches, but arranged in a herringbone pattern and without a gap between them.

Embroidery flowers with ribbons: ideas

Embroidery ribbons has been rapidly gaining popularity lately. A fairly simple, fast, but at the same time very effective embroidery technique is gaining more and more fans every day.
I suggest that those who have not yet tried their hand at this type of embroidery give it a try...

First, we need fabric. In principle, you can embroider with ribbons on almost any fabric - from organza and silk to knitwear and velvet.
I think for starters it’s better to take some natural fabric (or with a small addition of synthetics). Medium density and hardness.
I don’t have simple fabrics on hand right now, so I will embroider on Lugan.

Needles must have a wide eye.
The best needles are the chenille type - a wide eye and a sharp tip.

If there are none, you can sew with tapestry ones - a wide eye and a blunt tip, but it will be much more difficult.

You may also need a regular sewing needle with a sharp tip.

I suggest this embroidery motif:

Those. - we will embroider a heart. A small motif is used to change the shape of the finished embroidery. Those. - if there is a desire, they can fill empty spaces. For example:

Or

The scheme, in principle, is not decisive, since the number of colors and their arrangement in the picture will depend on the ribbons you have and personal preferences. It is needed for a general idea - in which part of the heart we will embroider...

By tapes

We proceed from what is available at home or in stores.
I have ribbons in three sizes: 2mm, 3mm and 5mm.
It turns out that my flowers will be quite small

Ribbon color:

Green - one tone is required, if desired - you can use two or three shades
other colors - three shades. Of these: two (more possible) in the same color scheme - for example - red and pink, one to choose from - for example, blue (you can also use more shades)

If you really have a hard time choosing, you can use one color... no big deal. There will be just flowers of the same color.

We are not afraid to replace colors and improvise.

Attaching ribbons to the needle and fabric

There is no need to cut the long ribbon, otherwise it will fray during the embroidery process and become wrinkled - I cut about 40 cm

Making a knot to attach the ribbon to the fabric
Cut one end of the tape straight. Fold the ribbon

Piercing with a needle

And we stretch the ribbon right through to the very end - at the tip of the ribbon you get a neat knot

Just in case - a diagram

Attach the ribbon to the needle.

We cut the second end of the ribbon at an angle - this will make it easier to insert it into the needle:

We pierce the tip of the tape with a needle, approximately a centimeter from the edge

Pull the long end of the ribbon so that the punctured hole is pulled towards the eye of the needle:

Now we take the short tip, pull it to the end of the eye of the needle and remove it from the needle, as if stitching a ribbon

We carefully pull this whole thing up

Embroidery size

I would like you to learn not just to embroider according to a ready-made pattern and exact instructions, but to improvise, focusing on the available materials, and not on instructions in books or magazines. Moreover, there is nothing complicated about it...

Each of us can draw a heart of the size he needs. This is just a form - which we will already fill out with embroidery.

The diagram will only be needed to roughly guide you in which zone of the heart to embroider which flowers.
It’s just that depending on the ribbons used and the size of the heart, each person will get a different number of flowers.

For example - you will have five large ones, and I will have 15 small ones

I made the size based on the size of the existing cloth: roll

My heart at its widest horizontal part was 14 cm
I marked the outline with dots using a water-washable marker.

In the first part of the lesson we fill in the area marked in blue on the diagram

It is absolutely not necessary to make the same number of flowers - you can make the flowers smaller, but in larger quantities. Or fewer large flowers.
Please note that there is free space between the flowers for leaves.

For orientation, I first embroidered one flower, looked to see if its appearance and size suited me or not, and only then marked the canvas for the rest of the flowers.

Rose on a spider's web

We will fill the selected area with roses embroidered on the web.
The web can be made from floss threads, or from the same ribbon that you use to embroider.
We will do it according to the second method

If you have a good eye, you can do without markings:wink
We mark a circle for the future flower - mine has a diameter of about 2.5 cm. We divide it into five sectors

I hope it will be clear from the photographs. Making a web

The next photo shows that after making the last ray, we do not bring the needle to the wrong side, but drag the ribbon under the already embroidered rays

We begin to form a rose by alternately stretching the ribbon under or above the rays of the web

Last stitch: bring the tape to the wrong side and secure it there

On the wrong side

It’s better not to straighten the ribbons too much - this will make the rose fluffier and more natural.
Choose the degree of tension yourself - whoever likes what. I make a tight flower (I’m just used to it) You can make the tension of the ribbons looser - the flower will look a little different
try.. experiment.. :flowers:

As I said - after sewing the first rose - I marked where I would embroider the rest of the roses

I decided to make roses in three colors: pale blue, light blue and bluish-turquoise

Fill the sector marked in pink with flowers

Take a long ribbon = 12.5*width of the ribbon. Plus 2-3 mm on the sides - burn them with a lighter. We mark the tape into five parts, 2.5*the width of the tape.

We stitch the needle forward with regular threads matching the color, as shown in the picture.

We take the ends of the thread, tighten the gathering and tie the threads

We cut off one tail of the thread, thread the second one into a needle and sew the flower onto the fabric. We make stitches in the center area where the tape is gathered

Use a 2mm ribbon to make French knots in the center.

Choose the number of twists around the needle yourself - I did only one turn. You can make Frenchies not with ribbon, but with floss. Or sew on beads or beads.

I wasn’t able to take a photo of the process - it’s inconvenient to take a photo with one hand and at the same time twist the tape and hold it. Therefore, for those who don’t know how to make Frenchies, watch the video:

Making the required number of flowers:

We make a half-opened flower from a ribbon divided into three parts (we divide according to the same principle as for 5 petals)

We make a bud from one segment of ribbon:

Sew onto the fabric in the area where the tape is pulled together

Tip: Sew the half-opened flower and bud onto the fabric slightly away from other flowers - keep in mind that we will still need to make the calyxes of the flowers.
By varying the number of buds, large flowers and half-opened ones, you can get your own, completely individual design

We make stamens. We pull the 2 mm ribbon to the front side

Twist the ribbon

We pierce the fabric in the area where we will have the tip of the stamen and, holding the ribbon so that it does not unwind, pull it to the wrong side and immediately bring it to the front side, making a hole next to the previous one - we embroider a French knot on the tip of the stamen

In the same way we make the number of stamens you need. You can make such stamens on large flowers

Embroider the area marked in yellow:

It is better to mark the middle of the flowers (since we will be embroidering flowers similar in structure to daisies). The diameter of my finished flowers is 1.5 cm. I took ribbons 3 mm wide

The flowers are very simple. Attach the ribbons as usual. We draw the ribbon in the area of ​​​​the small circle and make a stitch to the large circle

We straighten the ribbon so that it is even, not twisted, and tighten the stitch - it is called - Straight stitch

Since I decided to make this flower two-color, I make the next stitch through a small gap, which just fits another stitch. You can make it three-color - then you leave room for two stitches. Well, if it’s one color, then we embroider in a row...

The stitches can be placed symmetrically, or you can show your imagination and make different distances between them

We fasten a ribbon of a different color to the needle and begin to fill the gaps left between the stitches.

You can make these stitches a little shorter or longer than the stitches of the first color

We fill the middle with French knots or beads. My flowers are small, so I made fruzels using floss thread in two folds. How to make French knots - see the First lesson

It seems to me that it turns out somehow unfinished?

This is the result we should get so far:

Let's embroider thin branches.

On the diagram I marked them with green and light green colors. Depending on whether you will use one or two colors of ribbons when sewing ribbons, we determine the color of the branches
If there is one color of ribbon for all the leaves, then, of course, we also embroider all the branches with the same color of floss.

For the lower branches that form the shape of a heart, I took a thin ribbon of light green color - 3 mm - for the leaves. The leaves will be smaller there
And on the remaining sheets of tape 3 and 5 mm - green

We select floss that matches the color of the ribbons

Embroider with a regular stem stitch

My branches:

I decided to make buds on the “hanging” branches.
We will embroider them ribbon stitches
I embroidered the buds with 5 mm ribbons

We bring the tape to the front, straighten it

We pierce the ribbon with a needle in the area where you will have the top of the bud and bring the needle and ribbon to the wrong side

Straightening the tape

We begin to tighten, forming the top of the bud

For the bud, tighten the ribbon so that the tip becomes sharp

We do the same for the cups of buds - ribbon stitch(I have 5 mm tape). We draw the ribbon just below the lowest point of the finished bud

We make a ribbon stitch - as described above, only we tighten it tighter to get a narrow leaf

Embroider another leaf:

Bottom of the cup - straight stitch(with which we embroidered flowers like daisies) We bring it out at the bottom of the bud on the left side and go to the wrong side on the right. It turns out like a loop with which we wrap the bud from below.

Straighten and tighten

Using the same ribbon stitch, we embroider the leaves, which are marked in green in the diagram.

Depending on how tightly or lightly you tighten the ribbon in this stitch, the shape of the leaves will change. You can also change the shape of the leaves by piercing the tape not in the center, but to the right or left of the center.

I embroidered leaves on the “hanging” branches with 5 mm ribbon, and around the roses with 1 cm ribbon.

I will embroider the buds in three shades of blue: darker at the base (above), and very light at the bottom.
I make the buds to match the roses... but in theory, you can use a different color... as if it were just another flower...

And here is my heart at this stage:

We embroider the branches at the bottom of the heart, which are marked in pale green, using a stitch that many embroiderers know as the “lazy daisy”

For this seam, you can straighten the ribbon during the embroidery process, you can, on the contrary, leave it as it lies (it seems to me that it turns out more naturally) - in general - as you like

This is what I ended up with:

I filled the voids with beads to match the beige flowers.

Closer

I slightly tinted the leaves with regular white acrylic paint to dim the excessive brightness of the ribbons. The intensity of the tint can be varied by diluting the paint with water. I applied the paint with a regular brush No. 2

OK it's all over Now.

Ribbon embroidery has its own rich history. It was owned by masters from China and Europe back in the Middle Ages. A forgotten type of needlework has received a new life these days. Using this embroidery technique, original interior items and exclusive finishing for clothing and accessories are created. Little has changed in the techniques that originated many years ago. In order to master them perfectly, you need to start with the ribbon embroidery technique for beginners.

Beginning needlewomen will need to purchase basic materials and equipment for their work.

As a basis for embroidery, you need to take a fabric that is strong enough, but such that the needle can easily pass through it.

When mastering embroidery techniques, it is best to start with canvas - it will be easier for beginners. The video presents the first lessons of ribbon embroidery for beginners.

For embroidery, clean fabric or with a printed pattern, tapestry or canvas are suitable, onto which patterns are applied snugly. In order to create patterns, you need to have at least two markers, one whose trace disappears after two days and the second, which can be erased with water.

You can also embroider on finished products (gloves, handbags, dresses). Silk, satin, nylon and corrugated ribbons are suitable for this technique. Satin ribbons are most often used; they have a special weave of threads, the front side is clearly different from the back.

Working with thin, soft and elastic silk ribbons is quite easy even for beginners. From them you can create simple small flowers, more luxurious roses and complex shapes, the space can be used in any size. The most suitable material is the width of which is from 7 to 25 mm. The video demonstrates a master class “Ribbon embroidery for beginners” using satin ribbons.

For accurate and high-quality work, you need to purchase a wooden or plastic hoop on which the canvas or fabric is held.

It is most convenient to embroider with ribbons using tapestry needles that have a wide eye. Large needle numbers are suitable for narrow ribbons.

To ensure that the process of mastering the technique of ribbon embroidery does not end quickly, for beginners it is necessary to use needles with blunt ends. A sharp needle can tear the fabric, but a dull needle gently pushes the threads apart and does not damage the base.

Before you start learning the technique of ribbon embroidery, you need to acquire some additional materials. You can't do without scissors and a lighter. To prevent the material from unraveling, it can be “stopped” with a lighter. There is no need to burn anything near the needle, otherwise the embroidery will be ruined.

When choosing a thicker fabric for work, you will need pliers and an awl. With their help it is much more convenient to pull the needle through the fabric.

Embroidery will become more beautiful and sophisticated if it is supplemented with beads, floss threads, decorative laces or yarn. The master class “Ribbon Embroidery for Beginners” demonstrates the use of additional decorations. It tells in detail how to correctly apply patterns, and then embroider them line by line. In the video, the master gives lessons in which he clearly teaches how, with the help of simple threads, ribbon embroidery becomes complete.

Let's get started

Most common seams

More diverse stitches began to be used in practice after translations of foreign books and master classes appeared on sale and on the Internet. Also, beginners should not be surprised that the same stitches in different translations can be called differently:

Embroidery technique

Before starting work, the tape is pulled to the wrong side of the fabric and secured. The tip of the 2 mm tape is secured with a flat knot. This type of knot does not add extra volume. After the embroidery is finished, you need to secure the seam. To do this, bring the needle to the wrong side and throw a loop on it (see master class lessons).

The ribbon embroidery technique is based on only a few simple stitches (straight, French), which are accessible to beginners.

In the process, they can be combined to create flowers and entire compositions. To do this, just learn how to embroider with a straight stitch, which is also called "forward needle". The result will be more effective if the stitches are of different lengths and tensions. You can place a pencil under the seam, so the stitches will become fuller and smoother.

No less popular is Japanese seam. It is performed using a regular simple stitch of 2-4 centimeters. To do this, the needle is brought out to the front side, then it is passed through the stitch again and it remains on the wrong side. You can pierce the fabric in the center or along the edges, the main thing is to stick to the pattern exactly.

The key stitch of this technique is french knot. The execution is based on a simple stitch, the needle needs to be brought from the wrong side to the front side, then it is wrapped with ribbon one to three times. Next you need to step back and bring the needle to the wrong side, and then tighten it onto the knot. It will become clearer after watching the master class on the technique of mastering the French knot.

Video tutorials demonstrate stitching techniques and how to create flowers. It all starts with creating a diagram, after which it is transferred to fabric and the design is reproduced piece by piece. There is no limit to fantasy - it can be roses, bouquets of lilacs, small wildflowers.

Beginning needlewomen can find simple diagrams on the Internet, where you can also view a master class on this technique. Those who want to master all the secrets of needlework should download all the lessons.

Ribbon embroidery tricks

As master classes and lessons show, embroidering with ribbons is interesting and exciting. In order for this process to be as successful and enjoyable as possible, you need to master some basic rules and tips. A master class or lessons on “little tricks” for beginners advises:

• the needle must be inserted carefully so as not to touch the thread;
• in the process there is no need to grab the ends of the tape, which remain on the wrong side;
• When making roses or petals from satin, it is important to remember that one side of the ribbon is matte;
• It is better to use long needles; if the ribbon is short, you can remove it from the eye, insert the needle into the right place, and then pull the ribbon through;
• if you need to embroider roses or other elements, and you have chosen a dense material, then you should apply an applique (all embroidery elements must be done separately, and then sewn and attached);
• You can iron finished embroidery only from the inside out;
• Crumpled tapes are not suitable for work;
• It is not recommended to use ribbons longer than 45 centimeters;
• It’s better to start with the outline.

Knowing all the subtleties, you can learn ribbon embroidery in a few weeks.