I APPROVE:
[Job title]
_______________________________
_______________________________
[Name of company]
_______________________________
_______________________/[FULL NAME.]/
"______" _______________ 20___
JOB DESCRIPTION
Chief Power Engineer
1. General Provisions
1.1. This job description defines and regulates the powers, functional and job responsibilities, rights and responsibilities of the chief power engineer [The name of the organization in genitive] (hereinafter - the Company).
1.2. Chief Power Engineer is appointed and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Company.
1.3. The chief power engineer reports directly to the [name of the position of the immediate supervisor in dative case] Companies.
1.4. The chief power engineer belongs to the category of managers and is subordinate to [the names of the positions of subordinates in the dative case].
1.5. A person who has a higher professional (technical) education and work experience in the specialty in engineering and technical and leadership positions in the relevant industry profile National economy at least 5 years.
1.6. The chief power engineer is responsible for:
- effective execution of the work entrusted to him;
- compliance with the requirements of performing, labor and energy discipline;
- the safety of the documents (information) that are in his custody (which have become known to him) containing (constituting) the commercial secret of the organization.
1.7. The chief power engineer should know:
- regulatory and methodological materials energy service of the enterprise;
- profile, specialization and features of the organizational and technological structure of the enterprise, the prospects for its development;
- fundamentals of the production technology of the company's products;
- organization of energy supply for production in the industry and at the enterprise;
- Unified system of preventive maintenance and rational equipment operation;
- production capacity, specifications, design features and operating modes of power equipment, power-using installations, rules for their operation;
- the procedure and methods for planning the operation of equipment and the production of repair work;
- regulations, instructions and other guidelines for the design and execution technical documentation;
- rules for acceptance and delivery of equipment after installation and repair;
- environmental legislation;
- requirements for the rational organization of labor during the operation, repair and modernization of power equipment;
- the procedure for the development of norms for the consumption of fuel and energy resources;
- the procedure for concluding contracts for the supply of the enterprise with electricity, steam, water and other types of energy;
- advanced domestic and foreign experience in the field of power supply of production;
- fundamentals of economics, organization of production, labor and management;
- fundamentals of labor legislation;
- rules and norms of labor protection.
1.8. The chief power engineer in his activities is guided by:
- local acts and organizational and administrative documents of the Company;
- internal labor regulations;
- rules of labor protection and safety measures, ensuring industrial sanitation and fire protection;
- instructions, orders, decisions and instructions of the immediate supervisor;
- this job description.
1.9. During the temporary absence of the chief power engineer, his duties are assigned to [the name of the position of the deputy].
2. Job responsibilities
The chief power engineer carries out the following labor functions:
2.1. It organizes the technically correct operation and timely repair of energy and environmental protection equipment and power systems, uninterrupted provision of production with electricity, steam, gas, water and other types of energy, control over the rational use of energy resources at the enterprise, consistent adherence to the saving regime.
2.2. Supervises the organization and planning of the work of power shops and farms, the development of schedules for the repair of power equipment and power grids, plans for the production and consumption of electricity by the enterprise, process fuel, steam, gas, water, compressed air, consumption rates and modes of consumption of all types of energy.
2.3. Provides the preparation of applications and the necessary calculations for them for the purchase of power equipment, materials, spare parts, for the supply of electric and heat energy to the enterprise and the connection of additional power to power supply enterprises, the development of measures to reduce the rates of energy consumption, implementation new technology, contributing to more reliable, economical and safe operation of power plants, as well as increasing labor productivity.
2.4. Participates in the development of plans for the future development of the energy sector, plans to improve production efficiency, in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of comprehensive mechanization and automation of production processes, in the consideration of projects for the reconstruction and modernization of the energy supply systems of the enterprise and its subdivisions, in the preparation of technical specifications for design of new and reconstruction of existing power facilities.
2.5. Gives opinions on the developed projects, participates in testing and acceptance of power plants and networks for industrial operation.
2.6. Provides protection works underground structures and communications, organizes the verification of communication facilities, signaling, accounting, control, protection and automation, as well as the timely presentation of boilers and pressure vessels to the authorities exercising state technical supervision.
2.7. Organizes the development of measures to improve the efficiency of the use of fuel and energy resources, the reliability and efficiency of the operation of power plants, the prevention of accidents, the creation of safe and favorable working conditions during their operation.
2.8. Monitors compliance with labor protection and safety regulations, instructions for the operation of power plants and the use of power equipment and networks.
2.9. Concludes contracts with third-party organizations for the supply of the enterprise with electricity, steam, water and other types of energy, controls their implementation.
2.10. Organizes storage, accounting for the availability and movement of power equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical economic indicators the work of the energy sector, accidents and their causes.
2.11. Carries out work on the exchange of experience in the field of operation of power equipment, economy and rational use of fuel and energy resources, contributes to the achievement of high performance in the operation of power plants.
2.12. It ensures the improvement of the organization of labor in the areas of the energy sector, the certification and rationalization of workplaces, the introduction of new progressive methods of repair and operation of power equipment.
2.13. Gives opinions on rationalization proposals and inventions concerning the improvement of power equipment and power supply, organizes the implementation of the accepted proposals.
2.14. Supervises the employees of the department and subdivisions of the enterprise that provide energy services to production, organizes work to improve the qualifications of employees.
When business need the chief power engineer can be involved in the implementation of his job responsibilities overtime, in the manner prescribed by the provisions of federal labor legislation.
3. Rights
The chief power engineer has the right:
3.1. To give subordinate employees and services assignments, assignments on a range of issues included in his functional duties.
3.2. Control the execution of production tasks, the timely execution of individual orders and tasks by the services subordinate to him.
3.3. Request and receive the necessary materials and documents related to the activities of the chief power engineer, subordinate services and divisions.
3.4. Interact with other enterprises, organizations and institutions on production and other issues related to the competence of the chief power engineer.
4. Responsibility and performance evaluation
4.1. The chief power engineer bears administrative, disciplinary and material (and in individual cases stipulated by the legislation of the Russian Federation - and criminal) liability for:
4.1.1. Failure to comply or improper fulfillment of the official instructions of the immediate supervisor.
4.1.2. Failure to perform or improper performance of his labor functions and the tasks assigned to him.
4.1.3. Misuse of the granted official powers, as well as their use for personal purposes.
4.1.4. Inaccurate information about the status of the work entrusted to him.
4.1.5. Failure to take measures to suppress identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise and its employees.
4.1.6. Failure to enforce labor discipline.
4.2. Evaluation of the work of the chief power engineer is carried out:
4.2.1. Immediate supervisor - regularly, in the process of the employee's daily performance of his labor functions.
4.2.2. Attestation Commission enterprises - periodically, but at least once every two years, based on the documented results of work for the evaluation period.
4.3. The main criterion for assessing the work of the chief power engineer is the quality, completeness and timeliness of the fulfillment of the tasks provided for by this instruction.
5. Working conditions
5.1. The operating mode of the chief power engineer is determined in accordance with the internal labor regulations established by the Company.
5.2. In connection with production necessity the chief power engineer is obliged to go on business trips (including local ones).
5.3. In connection with the production necessity, the main power engineer may be provided with official vehicles to carry out his labor functions.
6. Authority to sign
6.1. To ensure his activities, the chief power engineer is given the right to sign organizational and administrative documents on issues that are part of his functional duties.
Acquainted with the instructions ___________ / ____________ / "____" _______ 20__
Job description and job responsibilities of the chief power engineer.
1. GENERAL PROVISIONS
1.1. This job description defines the duties, rights and responsibilities of the chief power engineer of the enterprise.
1.2. The chief power engineer is appointed and dismissed in accordance with the procedure established by the current labor legislation by order of the director of the enterprise.
1.3. The chief power engineer reports directly to the director of the enterprise.
1.4. A person who has a higher
professional (technical) education and work experience in the specialty in engineering and technical and managerial positions in the relevant profile of the industry enterprise.
1.5. The chief power engineer should know:
- normative and methodological materials for the energy service of the enterprise;
profile, specialization and features of the organizational and energy structure of the enterprise, the prospects for its development;
- fundamentals of energy production of the company's products;
- organization of energy supply for production in the industry and at the enterprise;
- unified system scheduled preventive maintenance and rational equipment operation;
production capacities, technical characteristics, design features and modes of operation of power equipment, power-using installations, rules for their operation;
- the procedure and methods for planning the operation of equipment and the production of repair work;
- labor during operation, repair and modernization of power equipment;
- the procedure for the development of norms for the consumption of fuel and energy resources;
- the procedure for concluding contracts for the supply of the enterprise with electricity, steam, water and other types of energy;
- advanced domestic and foreign experience in the field of power supply of production;
- rules and norms of labor protection, normative and methodological materials for energy preparation of production;
- profile, specialization and features of the organizational and energy structure of the enterprise;
- prospects technical development industries and enterprises;
- power engineers of the production of the enterprise;
- systems and design methods;
- organization energy training production in the industry and at the enterprise;
- production capacity, technical characteristics, design features and operating modes of equipment, rules for its operation;
- the procedure and methods for planning the energy preparation of production;
- technical requirements applicable to raw materials, materials and finished products;
- regulations, instructions and other guidelines for the development and execution of technical documentation;
- means of mechanization and automation of production processes;
- determination methods economic efficiency introduction of new technology and energy, labor organization, rationalization proposals and inventions;
- the procedure for certification of the quality of industrial products;
- the possibility of using funds computing technology and design methods energy processes with their use;
- the procedure for accepting equipment into operation;
- the requirements for a rational organization of labor in the design of energy processes;
- domestic and foreign achievements of science and technology in the relevant industry;
- advanced domestic and foreign experience in the production of similar products;
- fundamentals of economics, organization of production, labor and management;
- fundamentals of environmental legislation;
- fundamentals of labor legislation;
- rules and norms of labor protection.
During the temporary absence of the chief power engineer, his duties are assigned to ___________________________.
OFFICIAL RESPONSIBILITIES.
It organizes the technically correct operation and timely repair of energy and environmental protection equipment and power systems, uninterrupted provision of production with electricity, steam, gas, water and other types of energy, control over the rational use of energy resources at the enterprise, consistent adherence to the saving regime.
Supervises the organization and planning of the work of power shops and farms, the development of schedules for the repair of power equipment and power grids, plans for the production and consumption of electricity by the enterprise, energy fuel, steam, gas, water, compressed air, consumption rates and modes of consumption of all types of energy.
Provides the preparation of applications and the necessary calculations for them for the purchase of power equipment, materials, spare parts, for the supply of electric and thermal energy to the enterprise and the connection of additional capacity to production, in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of comprehensive mechanization and automation of production processes , in the consideration of projects for the reconstruction and modernization of energy supply systems of the enterprise and its divisions, in the preparation of technical specifications for the design of new and reconstruction of existing power facilities.
2.4. Gives opinions on the developed projects, participates in testing and acceptance of power plants and networks for industrial operation.
2.5. Ensures the implementation of work on the protection of underground structures and communications, organizes the inspection of communication equipment, signaling, accounting, control, protection and automation, as well as the timely presentation of boilers and pressure vessels to the authorities exercising state technical supervision.
2.6. Organizes the development of measures to improve the efficiency of the use of fuel and energy resources, the reliability and efficiency of the operation of power plants, the prevention of accidents, the creation of safe and favorable working conditions during their operation. Monitors compliance with labor protection and safety regulations, instructions for the operation of power plants and the use of power equipment and networks.
2.7. Concludes contracts with third-party organizations for the supply of the enterprise with electricity, steam, water and other types of energy, controls their implementation.
2.8. Organizes storage, accounting for the availability and movement of power equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic performance indicators of the energy sector, accidents and their causes.
2.9. Carries out work on the exchange of experience in the field of operation of power equipment, economy and rational use of fuel and energy resources, contributes to the achievement of high performance in the operation of power plants.
2.10. Ensures the improvement of the organization of labor in the areas of the energy sector, the certification and rationalization of workplaces, the introduction of new progressive methods of repair and operation of power equipment.
2.11. Gives opinions on rationalization proposals and inventions concerning the improvement of power equipment and power supply, organizes the implementation of the accepted proposals.
2.12. Supervises the employees of the department and subdivisions of the enterprise that provide energy services to production, organizes work to improve the qualifications of employees.
2.13. Note. The duties of the chief power engineer are determined on the basis and in the scope of the qualification characteristics for the position of the chief power engineer and can be supplemented, specified in the preparation of the job description based on specific circumstances.
3. RIGHTS.
The chief power engineer has the right:
3.1. To give subordinate employees and services assignments, assignments on a range of issues included in his official duties.
3.2. Control the execution of production tasks, the timely execution of individual orders by the services and divisions subordinate to him.
3.3. Request and receive the necessary materials and documents related to the activities of the chief power engineer, subordinate services and divisions.
3.4. Interact with other enterprises, organizations and institutions on energy supply and other issues related to the competence of the chief power engineer.
4. LIABILITY.
The chief power engineer is responsible for:
4.1. The results and efficiency of production activities related to his job duties, specified in section 2 of this Instruction.
4.2. Inaccurate information about the status of implementation of work plans of subordinate services and departments.
4.3. Failure to comply with orders, orders and instructions of the director of the enterprise.
4.4. Failure to take measures to suppress the identified violations of safety rules, fire and other rules that pose a threat to the activities of the enterprise, its employees.
4.5. Failure to ensure compliance with labor and performance discipline by employees of subordinate services and employees subordinate to the chief power engineer.
5. RIGHT TO SIGNATURE. OPERATING MODE.
5.1. To ensure his activities, the chief power engineer is given the right to sign organizational and administrative documents on issues that are part of his job duties.
5.2. The operating mode of the chief power engineer is determined in accordance with the internal labor regulations established at the enterprise.
5.3. Due to production needs, the chief power engineer can go on business trips (including local ones).
5.4. To resolve operational issues related to production activities, the chief power engineer may be provided with official vehicles.
AGREED:
0.1. The document comes into force from the moment of its approval.
0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.3. The document has been agreed upon: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.4. Periodic check of this document produced at intervals not exceeding 3 years.
1. General Provisions
1.1. The position "Chief Power Engineer" belongs to the "Executives" category.
1.2. Qualification Requirements- complete higher education relevant areas of training (master, specialist). Work experience in the professions of managers lower level corresponding professional direction: for a master - at least 2 years, for a specialist - at least 3 years.
1.3. Knows and applies in activities:
- decrees, orders, orders, methodological, regulatory and other guiding materials on the organization of energy services for the enterprise, profile, specialization and features of the structure of the enterprise, prospects for its development, fundamentals of the production technology of the enterprise;
- organization of energy supply for production in the industry and at the enterprise;
- system of scheduled preventive maintenance and rational equipment operation;
- production capacities, technical characteristics, design features and modes of operation of power equipment, power-consuming installations, rules for their operation;
- the procedure and methods for planning the operation of equipment and the production of repair work;
- regulations, instructions and other guidelines for the development and execution of technical documentation;
- rules for acceptance and delivery of equipment after installation and repair;
- environmental legislation;
- the requirements for the rational organization of labor during the operation, repair and modernization of power equipment;
- the procedure for the development of norms for the consumption of fuel and energy resources;
- the procedure for concluding contracts for the provision of the enterprise with electricity, steam, water and other types of energy;
- advanced domestic and world experience in the field of energy supply of production;
- fundamentals of economics and management, organization of production, labor and management;
- the basics of labor legislation.
1.4. The chief power engineer is appointed and dismissed by order of the organization (enterprise / institution).
1.5. The Chief Power Engineer reports directly to _ _ _ _ _ _ _ _ _ _.
1.6. The chief power engineer supervises the work of _ _ _ _ _ _ _ _ _ _.
1.7. During his absence, the chief power engineer is replaced by a person appointed in accordance with the established procedure, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.
2. Description of work, tasks and duties
2.1. Supervises the scientific, technical and technological preparation of the power supply of the enterprise.
2.2. Organizes the technically correct operation and timely repair of energy and environmental protection equipment and power systems, uninterrupted supply of electricity, steam, gas, water and other types of energy, control over the rational use of energy resources at the enterprise, consistent compliance with the energy saving and economy regime.
2.3. Supervises the planning and organization of the work of power shops and farms, the development of schedules for the repair of power equipment and power grids, plans for the production and consumption of electricity by the enterprise, process fuel, steam, gas, water, compressed air, consumption rates and modes of consumption of all types of energy.
2.4. Provides the preparation of applications and the necessary calculations for them for the purchase of power equipment, materials, spare parts, for the supply of electric and thermal energy to the enterprise and the connection of additional capacity of power supply enterprises, the development of measures to reduce the consumption of energy resources, the introduction of new technology, which ensures reliable, economical and safe work power plants, as well as increasing labor productivity.
2.5. Participates in the development of plans for the future development of the energy sector, improvement of production efficiency, in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of comprehensive mechanization and automation of production processes, in the consideration of projects for the reconstruction and modernization of the energy supply systems of the enterprise and its divisions, in the preparation of technical specifications for design new and reconstruction of existing power facilities.
2.6. Prepares conclusions on the developed projects, participates in testing and acceptance of power plants and networks into industrial operation.
2.7. Ensures the implementation of work on the protection of underground structures and communications, organizes the inspection of communications, signaling, accounting, control, protection and automation, as well as the timely submission of the inspection of the state supervision of boilers and pressure vessels.
2.8. Organizes the development of measures to improve the efficiency of the use of fuel and energy resources, reliable and economical operation of power plants, prevent accidents, create safe and favorable working conditions during their operation.
2.9. Monitors compliance with labor protection rules, instructions for the operation of power plants and the use of power equipment and networks.
2.10. Concludes contracts with third-party organizations to provide the enterprise with electricity, steam, water and other types of energy, and controls their implementation.
2.11. Organizes storage, accounting for the availability and use of electrical equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector, accidents and their causes.
2.12. Carries out work on the exchange of experience in the field of operation of power equipment, economy and rational use of fuel and energy resources, contributes to the achievement of high performance of power plants.
2.13. It ensures the improvement of the organization of labor in the areas of the energy sector, the certification and rationalization of workplaces, the introduction of new progressive methods of repair and operation of power equipment.
2.14. Prepares conclusions on rationalization proposals and inventions concerning the improvement of power equipment and power supply, organizes the implementation of the adopted proposals.
2.15. Supervises the employees of the department and subdivisions of the enterprise that provide energy services to production, organizes work to improve the qualifications of employees.
2.16. Knows, understands and applies the current regulatory documents relating to his activities.
2.17. Knows and complies with the requirements of regulatory enactments on labor protection and the environment, complies with the norms, methods and techniques for the safe performance of work.
3. Rights
3.1. The Chief Power Engineer has the right to take action to prevent and eliminate cases of any violations or inconsistencies.
3.2. The chief power engineer has the right to receive all social guarantees stipulated by the legislation.
3.3. The chief power engineer has the right to demand assistance in the performance of his official duties and the exercise of rights.
3.4. The chief power engineer has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of necessary equipment and inventory.
3.5. The chief power engineer has the right to get acquainted with the draft documents relating to his activities.
3.6. The chief power engineer has the right to request and receive documents, materials and information necessary for the performance of his duties and orders of the management.
3.7. The chief power engineer has the right to improve his professional qualifications.
3.8. The chief power engineer has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.
3.9. The chief power engineer has the right to familiarize himself with the documents defining the rights and obligations of the position held, the criteria for assessing the quality of the performance of official duties.
4. Responsibility
4.1. The chief power engineer is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the granted rights.
4.2. The chief power engineer is responsible for non-compliance with the internal labor regulations, labor protection, safety, industrial sanitation and fire protection.
4.3. The chief power engineer is responsible for the disclosure of information about the organization (enterprise / institution) related to trade secrets.
4.4. The chief power engineer is responsible for non-fulfillment or improper fulfillment of the requirements of internal normative documents organizations (enterprises / institutions) and legal orders of the management.
4.5. The chief power engineer is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.
4.6. The chief power engineer is responsible for causing material damage to the organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.
4.7. The chief power engineer is responsible for the misuse of the granted official powers, as well as their use for personal purposes.
Few people know that in large factories and enterprises one of the most important people is the chief power engineer. He monitors the distribution of energy resources: electricity, heat. He also organizes reliable power supply, competent technical operation of energy systems, which affects the profitability of any enterprise. Any more or less large plant this position is held in high esteem, but it requires huge amount knowledge and experience.
Main responsibilities
The chief power engineer is engaged in organizing the correct operation, repair and installation of power equipment, uninterrupted and reliable power supply for production. This official monitors the expenditure of compliance with the regime of their saving. The Chief Power Engineer Department is responsible for planning, organizing and implementing effective work energy economy, develops schedules for the repair of equipment and power grids, plans for the production or consumption of electricity, fuel, gas, steam, water. This is engaged in the preparation of applications and calculations for them for the purchase of equipment, spare parts and necessary materials, for the supply of energy, for connection, if necessary, additional capacity. He plans the prospects for the development of the energy sector, increasing the overall efficiency of production, prepares proposals for the reconstruction of the enterprise, introduces means of process automation.
Gas service, which includes employees involved in the repair and operation of gas systems.
1. General Provisions
1.1. Chief Power Engineer - Head of the Department of the Chief Power Engineer (OGE, hereinafter referred to as the Chief Power Engineer) ensures the operation of the energy facilities of the enterprise.
1.2. Appointment, transfer, dismissal, encouragement and punishment of the chief power engineer are carried out in the manner prescribed by law by order general director as advised by the Deputy General Director - Chief Engineer.
1.3. The Chief Power Engineer reports to the Deputy General Director - Chief Engineer.
1.4. The chief power engineer is directly subordinate to:
1.4.1. Deputy Chief Power Engineer for Electricity and Water Supply, who is in charge of the Electrotechnical Bureau and the Bureau of Water Supply and Sewerage;
1.4.2. Deputy Chief Power Engineer for Heat and Gas Supply and Cleaning Wastewater managing the heat engineering bureau;
1.4.3. Head of Bureau for rational use energy resources;
1.4.4. Head of the bureau of departmental supervision;
1.4.5. Head of the Bureau of Economics and Preventive Maintenance;
1.4.6. Head of the power supply department;
1.4.7. Head of a thermal power plant;
1.4.8. Head of the gas supply department;
1.4.9. Head of the water supply and sewerage department;
1.4.10. Head of the workshop for neutralization and treatment of industrial wastewater;
1.4.11. Head of the electrical repair shop;
1.4.12. Head of the centralized energy repair shop.
1.5. The orders and instructions of the Chief Power Engineer are binding on the heads of all the above structural divisions and can only be canceled by the General Director and Deputy General Director - Chief Engineer.
1.6. During the absence of the chief power engineer, his duties are assigned to his deputy with a large salary, unless otherwise stipulated by the order of the general director.
1.7. The chief power engineer is guided in his work by:
the current legislation of the Russian Federation;
governing, normative and other documents of the ministries and departments of the Russian Federation;
regulatory and other documents of bodies exercising state supervision over the work of industrial enterprises;
the charter of the enterprise;
quality management policy;
quality manual;
the requirements of state and interstate regulatory documents;
by orders of the general director;
rules and regulations of labor protection and industrial safety;
orders for the enterprise;
internal labor regulations;
enterprise standards;
by this provision.
2. Qualification requirements
Specialists with the highest technical education, we have at least 5 years of work experience in the field of energy, completed training in the field of quality, as well as training, internship and certification in accordance with the procedure established by law for knowledge of the rules and regulations on labor protection and industrial safety.
3. Job responsibilities
The chief power engineer is obliged:
3.1. Organize uninterrupted supply of the enterprise with energy resources of the required parameters (electricity, steam, superheated water, industrial and drinking water, natural gas, compressed air), including:
3.1.1. Organize the reception of electricity from the ________ system, (name) transformation and transmission to consumers.
3.1.2. Organize metering of electricity received from the system _______ (name) and consumed by divisions of the enterprise, monitoring the operation of electricity metering devices.
3.1.3. To organize the provision of the divisions of the enterprise with heat energy of the given parameters.
3.1.4. Organize the generation of its own electricity.
3.1.5. Organize uninterrupted supply of all gas-consuming shops with natural gas of the required parameters.
3.1.6. To organize uninterrupted supply of the enterprise's divisions with river, circulating and drinking water of the given parameters.
3.1.7. To organize ensuring the good condition of the external fire-fighting water supply networks.
3.1.8. Organize the reception of household and faecal wastewater from the enterprise and third-party enterprises and ensure their pumping to the workshop for neutralization and treatment of industrial wastewater (NiOPSV).
3.1.9. Organize biological wastewater treatment to parameters that meet environmental standards and requirements.
3.1.10. Organize the preparation and conclusion of contracts with third-party organizations for:
obtaining energy resources;
energy supply;
waste water intake;
provision of services for the maintenance of power equipment;
provision of services for the repair of power equipment.
3.2. Organize the development of regulatory and technical documentation for technical operation, repair and modernization of equipment for subordinate structural units, including:
3.2.1. Lead and personally participate in the development of current and long-term plans development of the enterprise's energy facilities in accordance with production plans.
3.2.2. Prepare technical specifications for the design of power facilities of the enterprise. Consider and give opinions on projects for the reconstruction and expansion of the energy sector.
3.2.3. Participate in the preparation of title lists for construction.
Coordinate projects in terms of energy supply.
3.3. Organize ensuring the uninterrupted operation of power engineering, electrical engineering, heat engineering, gas equipment, pipelines due to repairs and maintenance, ensuring the safe and economical operation of the enterprise divisions. To this end:
3.3.1. Ensure quality control installation works and participation of subordinate specialists in carrying out commissioning works at newly commissioned power facilities.
3.3.2. Participate in the work of commissions for the commissioning of power equipment for new and reconstructed facilities; check the quality and completeness of technical documentation. Prepare the accepted power facilities for industrial operation.
3.3.3. Ensure that the enterprise carries out a system of scheduled periodic repairs of energy facilities, including:
3.3.3.1. Lead the development of plans for overhaul and current repairs of power equipment, power plants and communications.
3.3.3.2. Supervise the compilation of lists of defects, estimates and title lists for the production of overhaul and reconstruction of the energy sector.
3.3.3.3. Organize work on the timely and complete preparation of applications for power equipment, spare parts for it and repair materials.
3.3.3.4. Ensure the timely conclusion of contracts for the repair of power equipment with contractors.
3.3.3.5. Provide control by subordinate specialists of the major overhauls power equipment on time and in the approved amount, as well as the participation of specialists in its acceptance from repair.
3.3.3.6. Control the use of funds allocated for the repair of power equipment.
3.3.3.7. Organize timely preparation of the enterprise's energy facilities for work in winter conditions; issue a passport of readiness.
3.4. Ensure improvement in the quality of service and ongoing repairs in accordance with constantly changing customer requirements.
3.5. To contribute to the steady improvement of the qualifications of personnel in order to improve the quality of the work carried out.
3.6. Organize the development of plans for organizational and technical measures for reconstruction, technical re-equipment, increasing the reliability and efficiency of equipment operation in order to increase the economic efficiency of production.
3.7. Organize work to improve the organization
production, creating the most favorable working conditions, improving the culture of production.
3.8. Responsibilities in the field of quality:
3.8.1. Participate in the implementation of the quality management policy.
3.8.2. Ensure the use of suitable basic electrical and power equipment.
3.8.3. Ensure control over the relevant maintenance and repair of electrical and power equipment.
3.8.4. Organize and conduct documentation and registration of works on the repair of electrical and power equipment.
3.8.5. Participate in conducting internal and external audits of the quality system.
3.8.6. Participate in the development, operation and improvement of the quality system.
3.8.7. Participate in the analysis and assessment of the effectiveness of the quality system.
3.8.8. Participate in identifying the causes of nonconformities, developing the implementation of corrective and preventive actions.
3.9. Job responsibilities for labor protection and industrial safety:
3.9.1. Organize systematic monitoring of compliance with the rules and regulations of labor protection and industrial safety during repair, construction, installation and other types of work in subordinate units and services.
3.9.2. Organize the revision of instructions: through, special, other, job descriptions of specialists.
3.9.3. Control in subordinate units and services the implementation of activities provided for collective agreement, inspection reports, instructions, orders, instructions.
3.9.4. Participate in comprehensive inspections of the state of labor protection and industrial safety in individual workshops, carried out according to the plan for the enterprise.
3.9.5. Quarterly head a commission for inspection of the state of labor protection and industrial safety in one of the subordinate divisions. Based on the results of the check, draw up an act.
3.9.6. Develop plans for targeted inspections of the state of labor protection and industrial safety in subordinate units and services during work related to the function of the chief power engineer service, ensure these inspections.
3.9.7. Provide the organization of technical supervision over power equipment, gas facilities, communications, measuring instruments and automation, maintenance technological process in power plants, in good condition and safe operation steam boilers, pressure vessels, steam pipelines and hot water, gas pipelines, cylinders with flammable and liquefied gases.
3.9.8. Provide timely equipment diagnostics.
3.9.9. Ensure the receipt of licenses for types of activities by belonging and monitor the fulfillment of the terms of the licenses.
3.10. Ensure in subordinate units the production control over the observance of sanitary standards, rules and the implementation of sanitary and anti-epidemic (preventive) measures.
4. Interactions
Interaction of the chief power engineer with officials and structural units enterprises are presented below.
5. Rights
The chief power engineer has the right:
5.1. To represent on behalf of the company on the basis of a power of attorney issued by the head of the company.
5.2. Give instructions on the operation of power equipment, the use of all types of energy and fuel, modes of energy saving, on labor protection and safety of the energy sector, which are mandatory for all heads of production, workshops and departments and can only be canceled by the general director and chief engineer.
5.3. In accordance with the established procedure, prohibit the operation of power engineering equipment, electrical equipment, power plants and energy communications in the event of a gross violation of the rules, operating instructions or unsatisfactory technical condition, unpreparedness of the service personnel, the presence of a threat of an accident or accident. After warning the shop administration, give instructions on their disconnection from the existing networks (electrical, heat, etc.).
5.4. Prohibit the commissioning and operation of new power equipment that has deficiencies, deviations from the current rules and regulations that impede normal operation, not provided with technical documentation and trained service personnel.
5.5. Give instructions to the heads of shops and other departments on the operation and repair of power equipment.
5.6. Control the expense of funds allocated for repairs power plants, equipment and communications.
5.7. With the permission of the administration of the enterprise, invite specialists from research organizations for examinations, consultations, inspection of power equipment, on difficult issues operation and repair.
5. 8. Represent in higher organizations on issues within the scope of activities of the chief power engineer.
5.9. To address issues within the scope of his activities:
in the prescribed manner to attract the specialists of the enterprise;
hold meetings;
prepare drafts of orders and orders for the enterprise.
5.10. Submit proposals to the head of the enterprise and the chief engineer on the admission-transfer, dismissal, encouragement and punishment of the heads of subordinate units.
Note: hiring, transfer and dismissal on the initiative of the administration of specialists associated with the operation and repair of power equipment in all workshops of the enterprise is carried out in agreement with the chief power engineer.
5.11. Provide state and short-term unpaid leave (within 15 days) to employees of the Chief Power Engineer Service.
5.12. Establish the terms of reference for employees of the OGE and subordinate units and services in accordance with current legislation.
5.13. Appeal against the orders of the deputy general director - chief engineer of the enterprise to the head of the enterprise, without suspending the implementation of the instructions received.
6. Responsibility
The chief power engineer is responsible for failure to fulfill his duties and improper use of his rights in accordance with the current legislation.
