101 users find this page helpful.
Quick response:
Check the rest of the traffic mobile internet or a modem like this:
- *102#.
- Call 06745.
How to increase the speed of the Internet Beeline
- Increase the speed by 1 GB. To do this, you need to send the command *115*121# ... You can connect the option for 250 rubles.
- Connect an additional 4GB package. For this there is a command *115*122# ... The increase will take place after the main volume has ended. The cost of the service is 500 rubles.
- "Auto-renewal". The option is connected by sending a command *115*23# ... When the service is activated, traffic packages of 70 MB will be automatically added to the subscriber's number, the cost of each will be 20 rubles. The option will be valid until the end reporting period or until the balance of the subscriber runs out of funds.
How to extend traffic on Beeline? It would seem a trivial question in the era of the development of unlimited Internet. However, speed extension remains the most popular request in themed publics. The fact is that the truly limitless internet in mobile networks does not exist. For a certain amount, the user gets access to the network, while the volume of traffic directly depends on the cost of the package. When the paid limit ends, the provider introduces a restriction, as a result, it becomes almost impossible to access the Internet. How to extend the speed of the Internet on Beeline? There are several proven ways to do this.
How to extend traffic on Beeline
The speed extension starts with checking the remaining traffic. It makes sense to extend the speed only in cases where the available limit approaches the shutdown threshold. You can check the rest of the traffic of the mobile Internet or modem as follows:
- *102#.
- Call 06745.
- Through the "Personal Account" on the BEELINE website.
Important! The Beeline service for receiving the rest of the traffic is provided to subscribers free of charge.
Having found out that the speed extension is necessary, you can start increasing the available traffic. How to increase the speed of the Internet Beeline? To do this, you can use the following methods:
- Increase the speed by 1 GB. To do this, you need to send the command * 115 * 121 #. You can connect the option for 250 rubles.
- Connect an additional 4GB package. For this there is a command * 115 * 122 #. The increase will take place after the main volume has ended. The cost of the service is 500 rubles.
- "Auto-renewal". The option is connected by sending the command * 115 * 23 #. When the service is activated, traffic packages of 70 MB will be automatically added to the subscriber's number, the cost of each will be 20 rubles. The option will be valid until the end of the reporting period or until the balance of the subscriber runs out of funds.
Peculiarities
"Extend the speed" from Beeline is the best option avoid speed limits. However, some subscribers are worried about the question: "How to disable the service?" There is no need to do this: the option is provided on a one-time basis and is valid until the added traffic is exhausted or the billing period ends. However, you can turn off the extended Internet Beeline at any time. This is done like this:
- Call to number 0611.
- "Personal account", section of the mobile Internet.
- How do I turn off Auto-Renewal? The deactivation command * 115 * 230 # operates here.
Important! It is not recommended to disable options before the expiration of paid traffic. The service is one-time and after the exhaustion of packages it becomes inactive.
Additional features
How to increase internet speed? Here you can consider the nuances that will not only help save traffic, but also increase work productivity. mobile device online. Here are the recommendations of Beeline technical support specialists:
- Sequencing. To increase the speed, do not perform multiple file downloads at the same time. If we are talking about a torrent session, you need to limit the download speed and queue the files.
- Disable all unnecessary. Many applications, such as Skype, search engines, navigation tools perform automatic updates, "pumping" additional files from the network. To extend the paid traffic volume, the automatic update function must be disabled in the program settings.
- Using third party applications. Among the useful software is the LOONIES ADMINT utility. This application will help you customize the autorun menu system programs and will identify resource-intensive applications.
Important! The above methods will help not only increase traffic, but also increase the performance of your mobile device.
Video to the article
Operator "Tele2" provides limited Internet packages for its subscribers. After their expiration, access to the World Wide Web is provided at a limited speed of 64 Kb per second. If necessary, subscribers have the opportunity to eliminate this problem. The cost depends on the region.
When extending the traffic, make sure that the available megabytes have already run out.
When do you need to renew?
It is necessary to extend the traffic on Tele2 if the standard package has been used up and there are restrictions on access to the network. At the same time, it is important to check in advance the balance of megabytes on the balance, since there is a possibility that interruptions in access are related to the quality of communication, and not to the end of traffic.
Depending on whether you need additional megabytes or just a little time to resume the file, you can use the "Add speed" or "Add time" option.
Find out the remainder
You can check the balance using USSD commands. Depending on the tariff plan or connected option, the type of request will differ.
A standard balance check request is as follows - * 1551 * option code # and a call button.
- For "Internet from phone" use the code 15.
- Check the balance in the "Tablet" - 022.
- Find out the balance in the "Package" - 19.
- Check the balance of the "Portfolio" - 020.
- Use 021 for the Suitcase.
- To check the balance of services in the "Black" line - dial the standard combination with the code 0.
Execute a ussd request to check the remaining traffic.
Action options
If after checking your account it turns out that you have reached the limit, there are three options for extending network access. This is a connection of options that allow you to extend the time, speed up data transfer or increase the amount of available traffic. When choosing, pay attention to the characteristics of each of the methods.
Add speed
It will help you get an additional 500 megabytes at a fairly high speed. Its cost will be 30 rubles.
To activate dial * 155 * 181 #.
After the paid amount of megabytes is consumed, the option is automatically disabled.
You can check the account balance with the command * 151 * 18 #.
This method is suitable if the main traffic was consumed several days or a week before the end of the month, and you plan to use the Internet in the near future.
Add time
Allows you to speed up the download for 20 minutes. Valid after the end of the tariff plan. The main team is * 155 *.
- To activate, add the code 171 #.
- You can disable it by adding 170 # to the main combination.
- Check status - indicate 17 # after the asterisk.
The cost is about 10-15 rubles and depends on the region. You can learn more about tariffication by calling 611.
Please note that the service is not available for residents of the Republic of Crimea and Sevastopol.
Suitable for those subscribers who use the Internet from the phone from time to time and they need access to the network in order to download a particular file.
Please note that after downloading the file, you must send a request to deactivate the service. Otherwise, the service is put on auto-renewal, and money is withdrawn from the account.
Order gigabytes
Another option is to order additional gigabytes. There are several possibilities. Regardless of the selected action, the main query will look like this: * 155 * selection code # call button.
- The simplest option is "100 MB per day." Main characteristics:
- The cost is 15 rubles.
- To connect, add 251 to the main request.
- You can disable it using the code 280.
- Status check - 28.
- "500 MB per day." Valid for subscribers living in Moscow:
- The cost is 50 rubles.
- We use 171 to connect.
- Disconnection - 170.
- Find out the status - 17.
- Favorable package "3 GB for 30 days":
- Price - 150 rubles.
- Activation by request * 155 * 181 #.
- Disconnection - 180.
- Service status - 18.
- The most voluminous on this moment- "5 GB for 30 days":
- Price - 250 rubles.
- Inclusion - 231.
- Disconnection - 230.
- Status check - 23.
Please note that having memorized the shutdown command, you can easily recall the codes for turning on and checking the status, in the first case, replacing zero with one, and in the second, removing the last number.
Renewal through your personal account
If you use a modem for a computer or laptop, then it is best to order an extension through the "Personal Account" on the Tele2 website.
- We go to the site https://my.tele2.ru/.
- Click on the "Login" button.
- Enter the phone number.
- We receive the password on the phone and enter it in a special field.
- After authorization on the main page, we find the "Services" section and open it.
- We find the most suitable option and connect it.
Unlimited tariff line as a way out of the situation
One of the options for solving the problem of accessing the World Wide Web may be the choice of unlimited tariff plans or packages. It will allow you to go online at any time. In this case, neither the amount of transmitted and received data, nor the speed at which the exchange takes place, will be taken into account. The only condition is to pay the subscription fee within the specified period.
One of these tariffs is “Black unlimited”. The standard subscription fee for use will be from 290 to 385 rubles per month, depending on the region in which the subscriber is located. The package provides unlimited access to sites and portals, calls and SMS messages.
The "Unlimited Opera Mini" option allows you to get unlimited access to the World Wide Web when downloaded using the "Opera Mini" application. To connect, use the USSD request * 149 * 1 #. Disconnection with * 149 * 0 #. Connection cost and subscription fee also depend on your region. To know detailed information you can contact the operator of the company by calling 693. Megabytes used outside of the application are billed according to the rates of your main package.
Questions from users
We bring to your attention a solution to the problems that Tele2 subscribers most often encounter.
How to extend Internet traffic by 1GB?
Using the combination * 155 * 181 #. Please note that the offer is valid only for residents of St. Petersburg.
How to extend traffic if the internet runs out?
You can order an additional amount of data using USSD requests or through Personal Area user. For additional 500 MB dial * 155 * 181 #.
You can extend the Internet from the Tele2 company different ways... This could be buying additional megabytes or gigabytes, or extending the usage time. The cost depends on the solution you choose to the problem and the region.
Modern users of computer technology do not limit themselves to the possibilities of using only technical resource the device itself. Using computer technology, it is possible to visit various sites on the Internet, drawing from them useful information... It is good if the package provided by the service provider is not accompanied by any traffic restrictions. In this case, you don't even have to think about how long you have spent on the Internet, how much content you wanted to download. If you use a package accompanied by a certain traffic limit, then you have to carry out appropriate control so as not to exceed the established limit.
Even in background The OS can consume traffic. How to limit her appetites - in our new article
Unfortunately, sometimes you have to deal with an unpleasant "surprise", the culprit of which is your operating room. Windows system 10. Without your desire it is. Of course, you are unlikely to be delighted to learn about such "eccentricities" of Windows 10, you are unlikely to prefer to do nothing. And rightly so, inaction will lead to the fact that your Windows 10 will eat up all the traffic, as a result of this, you simply will not be able to access the Internet, in extreme cases you will have to carry additional expenses... We are ready to reveal to you the secrets of how to successfully establish traffic control, what actions to take to eliminate its unnecessary consumption.
Do not rush to say goodbye to Windows 10 just because it is so mercilessly eating up your traffic. In principle, an operating system can be tamed by establishing control over it, allowing it to do only those actions that you approve. It is not so difficult to do this, but it is important to set yourself up for the fact that you still have to perform several manipulations.
Monitoring utilities
We recommend that you first look at how your traffic is being spent. This is especially important to do when you have such a problem after Windows installations 10. To do this, first enter the "Settings", then follow the line "Network and Internet", and then on the left side of the window select the second line "Data usage", click on it. Immediately you will be taken to a page that will display information about how your traffic was spent over the last month.
If you are interested in what particular program eats traffic so mercilessly, then we recommend that you click on the "Usage Information" line. Immediately after that, a list appears on the screen, which will list all programs and applications installed on Windows 10 that, without your knowledge, consume the Internet volume allocated by the provider, exceeding its limit.
Of course, we recommend that you familiarize yourself with this list, immediately removing from it those applications that are of no interest to you, you never use them. If the program is of interest to you, but you notice that it also actively eats your Internet limit, then we recommend taming its "gluttony". The fact is that most applications are designed to automatically download updates. Of course, such actions provoke consumption more Internet resources. In order not to waste your monthly limit so thoughtlessly, you must establish control over automatic software updates. If there is no urgent need for such an update, we suggest that you simply turn it off. Even if the need arises later, you can always manual mode start the update process.
Disable OS updates
Developers software applications always implement the automatic update function for many programs, as well as for operating systems. it good offer from developers, since codes are embedded in update files, their action is aimed at correcting shortcomings identified in the process of direct use of the software.
The operating system is also oriented towards the systematic receipt of update files by the developers, therefore, with low traffic indicators allocated by the provider, it is useful to "instruct" Windows 10 itself about this. existing restrictions... This is easy to do if you follow several steps in sequence. In the lower left corner is the icon network connection, click on it with the right mouse button. In the list that appears, find the line "Network", click on this item. In the window that opens, select wifi parameter, go to it. Find exactly your wireless network, go to it, and then go to the line "Additional parameters". On the new page that opens, you will be asked to improve control, establish a metered connection.
And it is also important to consider that Windows 10 is ready to be updated not only from the official Microsoft website, but also from third-party resources too. This allows, in a good scenario, to quickly update the operating system. However, at the same time, the OS spends more traffic, since it is not only updated from different sources, but also distributes the resource itself, increasing the traffic consumption. The principle of this update is identical to torrent distributions.
To eliminate such undesirable consequences for you, when someone just "eats" the traffic allocated to you, go to "Settings", then find the option responsible for updating and security, and then immediately go to the section in which the parameters are set Windows updates. Further, you will again need to make the transition, going initially to the "Advanced options", and then move along the line prompting you to choose how and when to receive the update files. Now you will definitely find the option that offers updates from different sources, you need to disable it.
Disable OS app updates
Not only Windows 10 "likes" to be updated, but also those applications that were originally installed with the operating system. Disable them automatic update you can also, but only through the parameters of the Windows store itself.
Start the store initially Windows applications, then hover the mouse cursor over your profile icon and click on the "Options" list that opens. Now you will find the item "Update applications automatically", click on it. A list of applications will appear in a new window, next to which the switch will be installed, move the slider to the "Disabled" position. After that, even the application that “eats” your traffic with pleasure will no longer be able to do this, therefore, you will get rid of such a serious problem.
Do not forget to also look at what you have in startup. Sometimes the user himself does not suspect that he always has a torrent in active mode, which is involved in the extra-economical waste of traffic. Be sure to remove it and similar applications from startup. It is important to consider that very “ large portions"Even an application like Skype eats up traffic, especially at the time of a video call.
Browsers are quite active in pulling traffic, which you cannot do without, but the developers are worried that you can cheat and save money, reducing the consumption of Internet resources. To do this, you can use, in particular, the application for Google Chrome, which is called "Saving traffic".
Useful to disable and sync options operating system... This can be done simply by going to "Options" and then going to " Accounts". There you can find the option responsible for synchronization, respectively, disable it.
So, if you do not stay idle, and try to improve the system's performance, reduce traffic consumption, using our recommendations, then almost immediately you will be able to feel positive changes. Do not be afraid of difficulties, they are not as scary as they initially seem, overcome problems armed with useful knowledge.
How to extend the expired Internet traffic on MTS? If the Internet MTS on your phone or modem ends, you need to either get an additional package, or wait for the traffic to reset to zero, which occurs once a month.
| Traffic size | Connection cost | Command to connect | Time of action |
|---|---|---|---|
| 30 RUR | *111*05*1# | 24 hours | |
| 95 RUR | *167# | 30 days | |
| 175 RUR | *467# | 30 days | |
| 300 RUR | *168# | 30 days | |
| 450 RUR | *169# | 30 days | |
| 900 RUR | *469# | 30 days |
The "Turbo button" option allows you to connect additional packages different sizes: from 100 MB to 20 GB.
It should be noted that often the operator independently connects automatic activation additional package when paid ends. This is not always convenient, for example, the cost of an additional GB is 175 rubles.
How to increase traffic by 100 MB?
Activation: * 111 * 05 * 1 #
Action time - 24 hours.
The cost is 30 rubles.
When the Internet ends at the most inopportune moment and there is important question"How to extend traffic on MTS?", Additional 100 MB is very much.
This service has a rather high cost per megabyte. Therefore, if you need more megabytes, it is better to activate the 500 MB button than several times 100.
How to extend traffic by 500 MB?
Activation: * 167 #
The duration is 30 days.
The cost is 95 rubles.
This service provides a significantly larger package. At economical use you can stretch it to zero if there are only a couple of days left before it.
On 500 MB, you can watch several films in acceptable quality from a mobile phone or actively communicate on social networks for several days.
If you use the Internet access only to check the weather and view traffic jams, this package will be enough for the whole month.
How do I add 1 GB?
Activation: * 467 #
The duration is 30 days.
The cost is 175 rubles.
A gigabyte is enough for a month of active use mobile phone... This feature is most beneficial for tablet owners who can check email or browse news sites for an entire month without much savings.
Although for regular viewing of videos and movies from a tablet, it is better to connect 5 GB.
How do I add 2 GB?
Activation: * 168 #
The duration is 30 days.
The cost is 300 rubles.
The option allows customers of the MTS operator to extend their Internet traffic by two GB. This is quite a lot, so you can safely download and listen to music, communicate with your friends via Skype and so on.
How to increase traffic by 5 GB?
Activation: * 169 #
The duration is 30 days.
The cost is 450 rubles.
The button allows you to satisfy the needs of the most active user of a mobile device. This is almost always enough to hold out until zeroing.
How to extend traffic by 20 GB?
Activation: * 469 #
The duration is 30 days.
The cost is 900 rubles.
Twenty GB is the most big package MTS traffic. Most often it is used for powerful modern tablets or modem connection to a PC. Suitable for online games, watching movies, downloading files, and more.
When the button expires, the remaining traffic is burned. So, you can open the modem menu or go to the website internet.mts.ru.
How to activate Turbo Nights?
The Turbo Nights option provided unlimited access to the network from 1 am to 7 am and was very popular. It is currently not available.
According to one version, the reason for this was that scammers sent Moscow SIM cards to Far East and vice versa, getting home unlimited Internet due to the time difference.
Perhaps you have noticed that now it is difficult to find a person who has never used the Internet, mobile or home.
But what if your tariff plan ran out of traffic at an unlimited speed, and you did not have time to download the game from the application store or view several necessary web pages?
For example, on Beeline, it is very easy to extend the speed and traffic, and the subscribers of this operator may not worry too much - and it is inexpensive, and it is very easy to connect and activate. At the moment, the above operator has several options for extending traffic at once, which we will tell you about later.
Three ways to extend traffic on Beeline
The first way- an additional option "Auto-renewal of speed", which, as a rule, is already active even from the moment of connecting to one of the tariff plans for the Internet and will work automatically if the client exceeds the maximum allowable traffic volume. Thus, you will not have to monitor the consumption of the megabyte package - as soon as you use it up, the "Auto-renewal of speed" service is automatically activated and will do its job. Your tariff will add 200 additional megabytes for only 20 rubles.
Option activation is free of charge. Interesting feature is the fact that 200MB packages will be connected until your account runs out of money. If this happens, then the Internet speed will drop to 64 Kbps. You can connect "Auto-renewal of speed" using a special combination *115*23# or by calling the number 067-471-778 from your mobile device. Disconnection is performed in a similar way, only the combination is as follows *115*230# , and zero is added in the number - 067-471-77-80 .
Second option- "Extend the speed of 1GB" service. As the name suggests, the option offers to extend traffic on Beeline by 1 gigabyte for 100 rubles at once. Basically, this is the same above service, only multiplied by five and you get traffic right away. The service is provided for a period of 30 days from the date of activation. You can connect "Extend 1GB speed" via USSD request
