Quite often, new users of Apple devices cannot immediately figure out how to properly make the debut launch of an iOS device. The same applies to the first iPhone setup, when many seemingly incomprehensible windows appear on the screen one after another. Well, let's figure out how to set up an "iPhone" so that later its use does not cause serious inconvenience.
ConfiguringiPhone 6"from the box"
- After turning on the smartphone, a welcome window will open in front of you. Swipe from left to right on any part of the display to switch to settings mode.
- Now select the language and country you are in. This will affect the format of the time and date.
- For iPhone settings, operating platform iOS, you need to connect to the Internet. You can use like mobile network(it is recommended to choose a high-speed connection via 3G or 4G) and a Wi-Fi network.
- After that, the system will ask a question about enabling geolocation services. We strongly recommend that you accept this offer so that if you lose your device, you can locate its location. Geolocation services are also used in many modern applications.
- Since we are talking about iPhone setup out of the box, in the menu that opens, select the "Configure as new iPhone" item.
- Now comes the most important moment in the debut launch of the "apple" device - setting up an Apple ID. Follow these steps:
- Enter your date of birth (the system will not let a user under 18 years old);
- Next, enter your surname and first name;
- Then create a free email to iCloud. We advise you not to skip this item, because with Apple's branded e-mail, using a smartphone will be somewhat easier due to the absence of the need to work with multiple addresses;
- Come up with a name for the mailbox;
- Fill in the "Password" and "Confirm" fields. Be sure to remember the secret combination you entered, because in the future only through it you will be able to find your lost iPhone, buy applications and restore the device through a lost copy;
- Then the system for additional protection will ask you to write answers to 3 security questions... Also, try not to forget them in order to restore access to your Apple ID account if it is stolen;
- Provide a backup email address if you wish;
- The last point to customize your account is an agreement or refusal to receive updates (information about Apple updates) by e-mail.
- We then agree to the iCloud terms and conditions.
- Now let's move on to the settings on the iPhone. Select "Use iCloud", because without it, your device will lose the lion's share of functionality.
- Then turn on Find My iPhone, which uses GPS to help locate your smartphone if it is stolen or lost.
- Now follow the on-screen instructions to turn on Touch ID. This will allow you to use your fingerprint as a password or as an identifier for App Store purchases.
- The next item is to create a password. A traditional PIN comes in handy if your fingerprint reader fails or you just want to use traditional method unlock iPhone.
- Set up iCloud Keychain. This is a kind of password store, where your secret combinations for accessing sites are collected, as well as a PIN bank card... Optionally, you can select the "Configure later" item.
- Then it opens the "Diagnostics" menu. By Apple essence asks for permission to send reports on the performance of your iPhone. You can select the item both "Send automatically" and "Do not send". This will not affect the performance of the smartphone.
- Under the “Welcome” message that appears, select “Get Started”. That's it, we've set up the iPhone out of the box.
Setting up the Internet oniPhone 6
It's not enough just to start the iPhone - you also need to configure the basic functions on it, without which no modern smartphone cannot be imagined.
Initially, let's figure out how to set up the Internet on an iPhone. To do this, follow the instructions below:
- Go to "Settings" -> " cellular"->" Cellular data network ".
- Here, depending on your operator, write the data in the fields "APN", "Username" and "Password". This information can be found on the World Wide Web by specifying the name of the cellular provider in the search engine.
- Now swipe to turn on the Cellular Data and 3G slider (if you need a fast internet connection).
- After that, the letter E or 3G will appear near the signal strength bar.
- Go to your browser and browse the Internet on your iPhone.
Hotspot mode on iPhone 6
Now let's find out how to turn on the tethering mode on the iPhone 6. It is needed in order for your smartphone to become a personal point. Wi-Fi access, that is, it could act as a router for distributing the network to other devices.
If after updating iOS you lost the modem mode, specify the data in the modem mode settings as in the photo below.
The modem mode is directly related to turning on the Internet, and therefore, after the above steps, do the following:
- Return to " Settings»And make sure the modem mode is active.
- Go to " Cellular communication". If tethering is off, turn it on.
- Enter the personal Wi-Fi password that users will need to enter in order to access the Internet through the connection you are distributing.
How to set up MMS on iPhone 6
Also, quite often there is a question about how to set up MMS on an iPhone. it important stage which will allow you to send images along with text message... So, do the following:
- Go to the section " Settings» -> « Posts"And with a swipe turn on the item" MMS messages».
- After that, go back to the main settings menu, go to "Cellular" and activate "Cellular data".
- Make sure your smartphone is connected to the Internet.
- The next moment in setting up MMS on iPhone is restarting it.
- Now remove and reinsert the SIM card.
In this article, we have discussed how to conduct iPhone launch"Out of the box" and how to configure it later. We hope you find the above information helpful.
World-renowned almost every year Apple makes its fans happy new model smartphone. IPhones are famous high quality and a set of set useful functions, among which an important place belongs to the Internet access. But connecting to the network on an "apple" device for some users causes difficulties, because on iPhone 4, on iPhone 5, 6, 6S and other versions of phones from Apple, the installed Internet can be configured in different ways.
Today it is much easier to tune in to work on the Internet on iPhone 4, iPhone 4S, iPhone 5S, iPhone 6 and other gadgets than a few years ago. If earlier, in order to connect to the Internet, it was required to know the settings of the network operator, send him messages with a request to connect or contact the communication salon for this service, now everything has become much easier. The customization is carried out by the user independently and directly through the device menu.
How to set up the Internet on the iPhone 5S, iPhone 6 and other versions of Apple phones, and how to connect the device to the Internet, is described in detail in our today's article.
If, having acquired new gadget, you are thinking about how to set up the Internet in iPhone 4S, iPhones 5.6 and other versions of this popular product from Apple, first of all think about automatic mode... Recall that almost all settings on smartphones from this company are made automatically. Namely, the user buys a SIM card of a certain telecom operator, inserts it into a special compartment on the device, and after a couple of minutes all the necessary settings are automatically registered in the system. And by "all" is meant absolutely everything - from a network access point to an account name.
But this method has its drawbacks. Firstly, not every communication company today provides a service automatic tuning the Internet. Companies such as Megafon, MTS and other well-known operators on the market, of course, have it, but less popular companies may not have it. In the latter case, the user should refer to the company's website - perhaps it contains the necessary data for setting, or directly to the operator's office.
How to connect and configure the Internet manually
In the event that on your iPhone 5, 6, or other device from Apple it does not come out to connect to the telecom operator and set up the Internet, and this can happen due to a malfunction of the device itself or problems with the network, you can try to fix the problem manually.
To do this, you must use one of the 3 methods detailed below.
Method 1. Setting up with an iPhone
To use this method, insert a SIM card into the device, and then follow the instructions below:
- Go to the device settings menu.
- Select the section of cellular communication.
- Find the item on cellular data.
- Move the slider to active mode to connect your iPhone 5,6 or other device you are working with to the Internet.
After completing the last step, check if the network is working. To do this, you just need to open a browser and try to find any information in a search engine or go to your favorite Internet resource.
Advice. When connecting to the Internet on iPhone, choose unlimited tariffs, which are represented today by almost all communication companies. Mobile traffic not cheap, therefore, with constant use of the Internet, a regular tariff will be very expensive. If you are an active user, choose only unlimited tariff plans on the internet.
Usually, the connection with the first method goes smoothly and without problems. But sometimes it happens that after completing all the steps, the network is still unavailable. In a similar situation, you need to check such points as:
- SIM card performance, antenna division.
- Number balance (perhaps the subscriber simply ran out of funds on the account, if the tariff is not unlimited).
- Cellular data and their settings (you can find it in SMS, because they are sent when you first connect to the network). If the user cannot find this data, you need to contact the operator, requesting them by SMS.
- Set up cellular data yourself: go to the cellular settings on the device, then to the cellular data network section, enter the information sent by the communication company via SMS.
Method 2.Connecting using a router via Wi-Fi
To set up the Internet in an iPhone using the second method, you need to follow a series of steps:
- Go to the device settings and select wi-fi.
- Move the slider.
- Wait a few seconds for the device to find available network access points.
- Select your network, click on its name.
- Enter the password, press the connect button.
After that, the Internet on the smartphone should work, and if this does not happen, you need to check the network performance via a PC or laptop. It may turn out that the problems are present in the network itself or the router is incorrectly configured.
Method 3. Connect using a computer
To apply this method, you will need a PC or laptop with a Wi-Fi module or an appropriate adapter. Before starting work, you need to check that the module is working properly. And then follow these steps:
- Go to the PC in the control panel and select the center.
- Go to the section for managing wireless networks.
- Click on the add button.
- Select the type of connection between your computer and another computer.
- Enter the desired name, come up with a password.
- Confirm the operation, in no case clicking the enable sharing.
- Go to section network connections and select the network with the previously created name.
- Check the boxes next to the section and title.
- When connecting to the Internet via Wi-Fi, we select Home the first time.
- Now all that remains is to turn on the smartphone and make a connection to the network. The internet should work fine.
Ways to Disable Internet on iPhone
Disconnection methods depend on which internet connection method you selected earlier. If the first one is described above, then you need to go to the cellular data settings and drag the slider to inactive mode.
If the second or third method was applied, just turn off the wi-fi. If there is a version on the device operating system 7 and higher, you need to touch your finger to the bottom of the screen and swipe all the way up. After that, a menu will pop up, where you should click on the file file icon so that it does not light up.
It should be remembered that if you do not need the Internet on your iPhone, it is better to turn it off. a working connection will drain the battery charge much faster.
Once again, we note that the versions of gadgets from Apple are different and, accordingly, the Internet settings in each of them may differ. Usually, a lot depends on the version of the operating system installed on the device.
If the user did not manage to configure the network manually, the most correct decision would be to contact the operator's support service by phone or on the corporate website and ask to send the necessary settings by SMS. V personal account You can also request these settings by specifying your smartphone model. The parameters for each of the versions of the iPhone are there.
Experience shows that in the overwhelming majority of cases, all network settings on iPhones are carried out automatically when installing a SIM card. If after that you still cannot catch the network and connect to it, you need to check the state of the account, namely, the balance Money on it, your tariff, tariff restrictions, etc. Sometimes a simple misunderstanding can be the source of a problem.
A common problem is the inaccessibility of the network itself. Remember that signal strength is usually good in urban areas. In the suburbs, it can be of poor quality - intermittent or completely absent.
So, above were considered the main ways of setting up a network and connecting to the Internet on an iPhone. Which connection method to choose is up to the user, based on specific situation... But it should be noted that resorting to manual settings only needed if there is serious problems with automatic.
Apple produces high-end smartphones, but this does not exclude the problem that users of gadgets sometimes face - the Internet does not work on the iPhone. The problem arises with different mobile operators. Most often, incorrect settings are to blame, but there are also more serious reasons. Be guided by simple instructions to understand why the Internet sometimes works poorly on smartphones and how you can fix iPhone malfunctions on your own.
How to identify the problem
Problems with unlimited mobile internet can be easily distinguished from any others. The main symptoms of a problem are:
- you cannot access the Internet on your iPhone (via 3G, LTE or Wi-Fi)
- tethering won't turn on (or iPhone doesn't work as a Wi-Fi hotspot)
- Internet works intermittently or if there is a connection icon on the screen mobile phone pages are not displayed
If you encounter a system error, just restart your smartphone - after turning on, the unlimited Internet function should work as usual. It also sometimes helps to switch to Airplane mode and then return to normal mode. If simple actions did not help, the error should be looked for in the phone settings, software or hardware.
Why LTE stopped turning on
The reasons why the Internet does not work on the iPhone are different. The most common problems faced by iPhone users are:
- error in parameters wireless network or 3G connection
- error iOS systems
- iPhone hardware breakdowns
- incorrect operation of the SIM card
In most cases (especially if it comes about software problems) you can fix the situation yourself.
There is network coverage, but the Internet is not working
LTE connection errors most often come from the mobile operator. Typically, this problem occurs after a hard reset or factory reset. Even with good network coverage unlimited Internet may not function. Distinguishing this problem from others is easy - the cellular antenna is displayed in the status bar, but the icon disappears. The following actions will help to correct the situation:
- go to iPhone settings
- select the tab "Cellular"
- find the menu "Data Transfer"
- type APN and username, after specifying them with your mobile operator
However, before checking the settings, make sure that you have paid for the Internet, have network coverage, and the operator provides this service. Check the details of the tariffs for mobile communications. If your Internet often does not work correctly, discuss technical assistance with your mobile operator. Some users, in order to eliminate the problems that arise, change their mobile operator to a more suitable one.
If the 3G icon is missing
When the 3G icon is displayed in the status bar, but the browser does not load the pages, you should eliminate the problem with the browser. The easiest way is to download all the proposed updates to the application, or uninstall and reinstall it. If you are using a standard browser, try the following steps:
- disable javascript in browser
- restart phone (Power + Home)
- close the browser by double-clicking on the Home key and swiping up the application tab
Many iPhone owners have encountered poor page loading and following links after updating the operating system to version 9.3. IOS system update to latest version will help solve the problem.
The methods described above are relevant only if the problem is caused by a browser error, and the cellular operator has no problems with mobile communication LTE. If the network or cellular data icon still disappears, you should look for other reasons.
Data network problems
You may not be connected to the internet if your cellular data network is off. Look in the parameters of the mobile phone - if it is disabled, then the icon in the status bar disappears. To connect the network, follow these steps:
- go to the connection settings menu
- make sure that in the items "Cellular data" and "Enable 3G" the slider is in the activated state
- turn on the transmission of cellular data if necessary
Even if the cellular connection was working properly, the coverage of the cellular network may be different, which is why the smartphone does not receive a signal everywhere. Operators cannot provide equally good cellular reception in different parts cities. If the 3G icon changes to E or H +, it is not considered a malfunction.
How to connect modem mode
If the mobile Internet on your smartphone does not function in modem mode or the device does not allow you to connect to the network in access point mode, make sure that the corresponding function is turned on. It's easy to do:
- go to the settings menu
- select "Modem mode" or "Cellular data" - "Modem mode"
- move the slider to the on position
- check the settings and the password that your mobile phone will generate
If everything is in order, you should restart your phone. Typically, the modem mode function is then restored. It is recommended to perform the same actions if it is not possible to create access. Another way is to reset the settings to the factory defaults and then enter all the parameters manually.
What to do if your smartphone stops receiving cellular communications
If you rebooted your phone and even reset it to factory settings, and the problems still persist (the 3G icon is missing in the status bar, there is no Internet access), the problem may lie in the hardware of the smartphone. Repairing the wireless module or other elements on your own can damage the manufacturer's seals, therefore, with iPhones under warranty, it is better to immediately contact the service center.
Our article will tell you how to connect the Internet on an iPhone. Learn how to set up 3G and Wi-Fi signals yourself.
Typically, Internet setup occurs automatically when Apple products are activated. However, a problem may arise and the network will stop working. In this case, you will have to configure access yourself. Today we will look at how to connect the Internet on an iPhone.
If your SIM card is a corporate one, then most likely the service that allows the phone to access the Internet will be disabled. In this case, you need to contact your cellular operator and order this service.
How to set up 3G
Check the connection of the mobile Internet service, and then go to the settings of your phone: click "Settings" and go to "Cellular". Then turn on "Cellular Data - Enable 3G / LTE".
Check if the 3G / LTE icon in the left corner of the phone screen is lit up. If the letter "E" is lit, it means that there is no 3G / LTE network signal.
If you have problems with the 3G / LTE signal connection, you need to check the data transmission setting
Configuring data transfer
Read the same
To do this, go to the menu of your phone and select "Basic settings", then "Network", and then "Cellular data network".
How to go online with iPhone 4 (13/30)
In this video tutorial, we will tell you about how to connect internet v iPhone 4... - our channel
How to set up Internet on iPhone
full version - internet-na- iphone/ have any questions or do not understand something? http: //
- APN: internet.mts.ru
- Username: mts
- Password: mts
Megaphone
- APN: internet
- Password: (leave blank)
Beeline
- APN: internet.beeline.ru
- Username: beeline
- Password: beeline
TELE2
- APN: internet.tele2.ru
- Username: (leave blank)
- Password: (leave blank)
You can also find out the settings for Internet connection by calling your cellular operator.
If, when checking the settings, it turns out that the data was entered incorrectly, then click the "Reset settings" button, restart the phone and enter the data again.
Read the same
If in this case the 3G / LTE signal will not work, then you need to contact the support service of your mobile operator.
How to set up Wi-Fi
There are several ways to connect a Wi-Fi signal on an iPhone.
If the router (router) distributes IP addresses automatically
V in this case you need to go to the settings of your phone. Click on the "Settings" section and select "Wi-Fi".
Check if the slider is turned on, if not, move it to activate the Wi-Fi signal connection.
If the router (router) distributes IP addresses in automatic mode or requires registering DNS
In this case, you need to click on the button to the right of the network and register the network settings.
If it so happens that Wi-Fi is configured, but the connection to the network does not occur, then in the network settings select the "Forget this network" option and write the settings again.
If problems arise, you need to reboot both the iPhone and the router itself.
Read the same
How to connect the Internet on Nokia 5230 Place our button. On which website you can download games and ICQ for nokia 5230. please tell me. HERE IS THIS How to connect to the Internet on Nokia 5230 Main page »How to connect to the Internet on Nokia 5230 How to connect to the Internet on Nokia 5230 Place our button. Which website can download ...
Setting up the Internet on an iPhone (4, 5, 6, 7, 8, X, SE) is a delicate and delicate process. Like any other more or less modern smartphone, the iPhone can connect to Wi-Fi, 3G, 4G, and soon 5G. It seems to be obvious, and what can be difficult in this in setting up the Internet?
Nevertheless, many Apple users using smartphones of this company relatively recently, periodically face problems wrong setting, due to which they cannot use this function... In this article, we will show you how to properly configure the Internet on your iPhone in order to get the most out of it.
Let's start with setting up the mobile Internet on the iPhone, since it is the most widespread and demanded one.
1. First, go to "Settings" → section "General" → tab "Network".
2.In the "Cellular" section, scroll down, find the "Cellular data communications" subsection and go to it.
3. Pay attention to the "Cellular data" block. 3 fields must be filled in here: APN, username, password.
For operators mobile internet, you must enter the following data:
| MTS | Beeline | MEGAFON | |
|---|---|---|---|
| APN | internet.mts.ru | internet.beeline.ru | internet |
| Username | mts | beeline | (do not enter anything) |
| Password | mts | beeline | (do not enter anything) |
| TELE 2 | Yota | Motiv | Rostelecom | |
|---|---|---|---|---|
| APN | internet.tele2.ru | internet.yota | inet.ycc.ru | internet.etk.ru |
| Username | (no login) | (no login) | motiv | (no login) |
| Password | (no password) | (no password) | motiv | (no password) |
Internet and MMS settings for iPhone
Internet and MMS settings on iPhone and iPad
Kyivstar mms, internet settings for iPhone 5
Reset APN settings if problems occur
If all the data is entered correctly, but there is no Internet, the best solution would be to reset the APN settings, for their subsequent automatic or manual input. To get back to APN settings by default, do the following:
1. Open "Settings".
2. Select the "Cellular" section.
4. Select the "Reset settings" function. If you have installed a configuration profile, the default settings of the profile will be used instead.
Setting (enabling and disabling) Wi-Fi on iPhone X, 8, 7, 6, 5
Next on our list is the connection and Wi-Fi setup networks. Connecting to the network is extremely simple and the only data you need to enter is set password(unless the network is open or public).
Here's what you need to connect to Wi-Fi:
1. Tap the "Settings" icon on the home screen and then tap "Wi-Fi".
2. Make sure the Wi-Fi slider is on, then select a network to connect to. If you have previously connected to a specific network, when you are within the range of an access point, the smartphone will automatically connect to the network.
3. After you select a network, a message asking for a password will appear .
4. Enter the password for the network.
5. Click the "Join" button.
6. For free, public Wi-Fi networks usually no passwords are required. However, before connecting to such networks, you should take care of security in order to avoid unpleasant situations with data loss and interception.
If you cannot click "Join", it means that the password you entered is incorrect. Try typing again or contact your network administrator for further assistance.
After you have successfully joined the network, a checkmark will appear next to the network name, and the Wi-Fi signal strength indicator will be displayed at the top left of the screen.
